CASIO HS-6-2JH Stopwatch Instruction Manual

1. Koniec produktuview

The CASIO HS-6-2JH is a compact and lightweight digital stopwatch designed for precise time measurement. It features a simple interface for various timing functions, including normal measurement, accumulated time, lap/split times, and 1st/2nd place finishes. Its design prioritizes ease of use and silent operation.

Image 1: The CASIO HS-6-2JH Stopwatch, showcasing its ergonomic design and compact size.

Główne cechy:

• Stoper 1/100 sekundy: Measures time with high precision.
• 10-Hour Meter: Capable of timing events up to 10 hours.
• Wiele trybów pomiaru: Includes normal time, accumulated time, lap time, split time, and 1st/2nd place finishes.
• Cicha praca: Buttons are designed to operate without producing audible feedback.
• Długa żywotność baterii: Approximately 3 years with a single CR2025 button battery.
• Lekka i ergonomiczna konstrukcja: Łatwy do trzymania i obsługi.

2. Konfiguracja

Instalacja baterii

The CASIO HS-6-2JH Stopwatch operates on one CR2025 button battery. The battery is typically pre-installed. If the display is dim or blank, battery replacement may be necessary.

1. Znajdź komorę baterii z tyłu stopera.
2. Using a small Phillips-head screwdriver, carefully remove the screws securing the battery compartment cover.
3. Remove the cover and gently extract the old CR2025 battery.
4. Włóż nową baterię CR2025 biegunem dodatnim (+) skierowanym do góry.
5. Replace the battery compartment cover and secure it with the screws. Ensure the cover is properly sealed.

After battery installation, the stopwatch display should activate. If not, ensure the battery is correctly inserted and fully charged.

3. Instrukcja obsługi

The stopwatch features three primary buttons: START/STOP, SPLIT/LAP, I TRYB. Refer to the image below for button locations.

Obraz 2: Przód view of the stopwatch, highlighting the display and control buttons.

Basic Stopwatch Functions (Normal Measurement)

1. Naciśnij TRYB button until the stopwatch display shows "0:00'00"00".
2. Naciskać START/STOP aby rozpocząć odmierzanie czasu.
3. Naciskać START/STOP ponownie, aby wstrzymać odliczanie czasu.
4. Aby wznowić, naciśnij START/STOP.
5. Aby zresetować stoper do zera, naciśnij SPLIT/LAP gdy stoper jest zatrzymany.

Lap and Split Measurement

This function allows you to record intermediate times (lap) and cumulative times (split) during an event.

1. Start the stopwatch by pressing START/STOP.
2. Aby nagrać split time (cumulative time from start), press SPLIT/LAP. The display will momentarily show the split time while the internal timer continues.
3. Aby nagrać czas okrążenia (time for the current segment), press SPLIT/LAP again after a split time is displayed. The display will show the lap time.
4. Repeat step 2 and 3 for subsequent splits and laps.
5. Naciskać START/STOP aby zakończyć odliczanie czasu.
6. Naciskać SPLIT/LAP aby zresetować stoper.

1st and 2nd Place Time Measurement

This mode is useful for recording the finish times of two competitors in a single event.

1. Start the stopwatch by pressing START/STOP.
2. When the first competitor finishes, press SPLIT/LAP. The display will show the 1st place time.
3. When the second competitor finishes, press START/STOP aby zatrzymać timer.
4. Naciskać SPLIT/LAP Do view the 2nd place time.
5. Naciskać SPLIT/LAP again to reset the stopwatch.

Silencing Feature

The CASIO HS-6-2JH is designed for silent operation, meaning button presses do not produce audible feedback. This feature is always active and does not require specific activation or deactivation steps.

4. Konserwacja

Czyszczenie

• Wipe the stopwatch with a soft, dry cloth.
• W przypadku uporczywych zabrudzeń użyj lekko damp szmatkę zwilżoną łagodnym mydłem, a następnie natychmiast wytrzeć do sucha.
• Nie należy używać środków czyszczących o działaniu ściernym, rozpuszczalników ani środków chemicznych w sprayu, ponieważ mogą one uszkodzićasing i wyświetlacz.

Wymiana baterii

Refer to the "Battery Installation" section under Setup for detailed instructions on replacing the CR2025 battery. Replace the battery when the display becomes dim or unresponsive.

Składowanie

Store the stopwatch in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Avoid exposing it to strong magnetic fields.

5. Rozwiązywanie Problemów

6. Specyfikacje

Image 3: Dimensions of the CASIO HS-6-2JH Stopwatch.

7. Gwarancja i wsparcie

Informacje o gwarancji

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.

Obsługa klienta

For technical assistance, service, or inquiries regarding your CASIO HS-6-2JH Stopwatch, please contact your local Casio authorized service center or the retailer from whom you purchased the product. Contact details can typically be found on the Casio official webmiejscu lub w opakowaniu produktu.