DLE220 Leading Edge Dimmer Controller
Instruction Manual
Installation Instructions
DLE220 Leading Edge Dimmer Controller
Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
Apply de-rating for electronic and LED loads. The manufacturer is not responsible for dimmable lamp selection. Each lamp/dimmer combination must be tested for compatibility prior to installation. This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.
Professional dimmers rated > 1000 W are out of scope of EN 61000-3-2.
© 2022 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
www.dynalite.com
AZZ 389 0922 R16
Documents / Resources
 | PHILIPS DLE220 Leading Edge Dimmer Controller [pdf] Instruction Manual DLE220 Leading Edge Dimmer Controller, DLE220, Leading Edge Dimmer Controller, Leading Dimmer Controller, Edge Dimmer Controller, Dimmer Controller, Controller |
