Pericat S20 Theater Projector with WiFi and Bluetooth
WHAT IS INCLUDED
PRODUCT OVERVIEW
QUICK START
- Plug the power cord into an outlet.
- Open the lens cover.
- Connect your device to the projector correctly.
- Press the Power Button to turn on the projector
- Select the correct input source to project your device
- Adjust the kickstand accordingly.
- Adjust the keystone and focus ring to get the best image performance.
- Press the Power Button twice to turn off the projector
PROJECTOR CONNECTIONS
SCREEN MIRRORING
Know System Settings before Screen Mirroring
Step 1:
Press button •s• on the project or press 
on the remote to enter the Input Source interface, then select Screen Mirroring.
Step 2:
In the interface of Screen Mirroring, press OK to enter the WiFi Selection interface.
INPUT SOURCE
Press button •s• on the projector/remote to enter the interface of Input Source
- A. Screen Mirroring
- B. HD Connection
- C. VGA Connection
- D. AV Connection
Note:
To enter the WIFI Selectioninterface, please press OK in the interface of Screen mirroring.
Starting Screen Mirroring
Important:
Before screen mirroring, please press button *s”‘ on the projector or press on the remote to enter Input Source interface and select Screen Mirroring
Screen Mirroring through Wireless Connection
Screen Mirroring via Router’s WiFi
- Turn on the projector, select Screen Mirroring as the input source to enter the Screen Mirroring Interface
- Press OK to enter WiFi selection interface and connect the projector to your router’s WiFi with correct password.
- The WiFi icon on the interface will change information
,to
and the router’s WiFi will be displayed on the interface of Screen Mirroring after a successful connection.
- Get back to the WiFi setting of your iOS mobile device, then connect it to the SAME router’s WiFi.
- Activate Screen Mirroring/Airplay Mirroring on your iOS mobile device and search for the projector, then select from the searching results to connect.
- The content on your iOS mobile device will be mirrored to the wall/screen after WiFi connection.
TIP
- If you’ d like to connect another router’s WiFi, please press OK in the Screen Mirroring Interface, then repeat the procedures mentioned in the section of Screen Mirroring via Router’ s WiFi.
- If you already connected your projector with the WiFi and now you want to connect it with iOS device cellular data. please go to the WiFi Selection Interface, and disconnect the current WiFi connection then follow the steps in the section of Screen Mirroring via Cellular Data.
Screen Mirroring via Cellular Data
- Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring.
- Go to the settings of your iOS mobile device and connect it to the WiFi of X20-785F3E (password: 12345678).
- Activate Screen Mirroring/Airplay Mirroring on your iOS mobile device and search for the projector.
- Select from the searching results to connect.
- The content on your iOS mobile device will be mirrored to the wall/screen via cellular data after a successful connection.
For Android System
- To activate this function, your Android device must support Multi-Screen/Wireless display. Names may differ from different devices.
- Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring.
- Turn ON the WiFi switch in your Android device.
- Activate Multi-Screen on your mobile device and search for the projector.
- Select from the searching results to connect.
- The content on your iOS mobile device will be mirrored to the wall/screen after a successful connection.
For Windows 10 System
- To activate this function, your Windows 10 device must support the Miracast feature.
- Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring.
- Turn ON the WiFi switch in your Windows 10 device.
- Press the “Windows Logo +P” key combination on your keyboard to enter the PROJECT interface, then select
- Connect to a wireless display” to search the projector.
- Select from the searching results to connect.
- The content on you Windows 10 device will be mirrored to the wall/screen after a successful connection.
Notes:
- The fluency of screen mirroring will be affected by the network environment. A bandwidth of lOOMbit or ! more is recommended when using screen mirroring. !
- Make sure your mobile device is close to the projector when using wireless connection. A distance within ! 3ft is recommended. :
- Some mobile devices may not support screen mirroring due to the compatibility.
- Due to the copyright restriction from Hulu, Netflix, and similar services, the contents CAN NOT be mirrored or cast.
- If the projected image freezes, please reboot the projector or press OK in the Screen Mirroring
- Interface to go to the WiFi Selection Interface and disconnect the current WiFi connection and re-connect the Home WiFi.
Screen Mirroring through Wired Connection
For iOS System
- Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring.
- Connect your iOS mobile device to the USB port of the projector with the ORIGINAL lightning cable.
- Select Trust in the pop-up window ofTrust This Computer?.
- The display of your iOS mobile device will be mirrored to the wall/screen after a while.
For Android System
- Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring .
- Go to the settings of your mobile device, find Developer options and turn on USB debugging.
Tip:
- The steps to turn on Developer options vary from different models of Android device. You may check it from
- Internet or contact us for the detailed steps. We take Samsung Galaxy SB+ as an example.
- Goto settings of your Android device, then tap About phone> Software information> Build number.
- Continuously tap on Build number for several times until it shows Developer mode had been turned on.
- Get back to the settings of your mobile device, it will show Developer options.
- Connect your Android mobile device to the USB port of the projector with the ORIGINAL USB cable.
- Tap OK when your Android mobile device pops out the window of Allow USB debugging?, then the display of your Android mobile device will be mirrored to the wall/screen after a while
OTHER SETTINGS
- Press
on the remote in any intertace to access the settings options shown below. - Set Picture Mode, Color Temperature, Aspect Ratio, Projection Mode and Reduce Display Size.
- Adjust Sound Mode and turn on/off Surround Sound and connect bluetooth.
- Set a time duration for projector to shut down automatically.
- Access Lanuage to change language of the projector, OSD Time to adjust duration for menu viewing,
- Software Update for the projector, and Restore Factory Default to do a reset for the projector.
Start connecting to bluetooth
- Press the “” key to select the Bluetooth option, and press OK to enter the Bluetooth connection interface.
- Press the right arrow key to open Bluetooth, select the Bluetooth search option and press OK to start searching for Bluetooth devices
- When the Bluetooth device is found, select the device you need to connect and press the OK button to start the connection. After the connection is successful, it can be used.
PROJECTION DISTANCE & SIZE
- The recommended projection distance varies with different projection contents.
- Please adjust the distance between the wall/screen and the projector properly as needed.
- Ambient darkness will improve the clarity of the projected images.
SPECIFICATION
TROUBLESHOOTING GUIDE
- The content from Hulu, Netflix, and similar services can not be mirrored or cast?
- Due to the copyright restriction from Hulu, Netflix, and similar services, the contents CAN NOT be mirrored or cast.
- What should I do if I want to watch the content from Hulu, Netflix, and similar services via the projector?
- Please prepare a Fire TV stick, Roku stick or Chromecast™ (not included), then connect it to the HD port of the projector to watch the content.
- Blurry Image
- Adjust focus ring/keystone.
- Projector and screen/wall must be in effective distance.
- Remote Unresponsive
- Make sure remote points at IR receiver directly and the IR receiver doesn’t be covered.
- Try a new pair of AAA batteries.
- Upside Down Images
- Press on the remote in any interface, then go to
> Projection Mode to flip the projection image. - Factory Reset
- Reset the projector to the factory settings
- Press on the remote in any interface, then go to
> Restore Factory Default to do a reset. - USB Port
- USB Port is designed for Screen Mirroring through Wired Connection.
CAUTION
The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
- The symbol indicates for indoor use only
- The symbol indicates DC voltage
- The symbol indicates AC voltage
RECYCLING
- This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
- This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.User has the choice to give this product to a competent recycling organization or the retailer when he buys a new electrical or electronic equipment.
- This product can be used across EU member states.
- The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
In all EU member states, operation of 5150-5250 MHz is restricted to indoor use only.
Pericat SUPPORT
- www. pericatstore. com
- support@pericatstore.com
- 1-s33-300-9545
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator&your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISEDC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm.
FAQS
Does this projector require a movie screen? Or can it be used on the side of a house?
It can be used on the side of a house of course. It works best if the paint on the wall is pure white. Or you can hang a white sheet. Obviously if you were to use a movie screen, the mage quality resulting is best, it all comes down to $$$. As the say goes, “you get what you pay for” Enjoy.
Does it connect to AirPods
Yes. Our projector with WiFi and Bluetooth can connect the AirPods.
My google pixel phone does not show projector as an option to cast? how do i make the phone recognize the projector?
Please follow the steps in the video to turn on the projector and enter the Screen Mirroring interface. Also make sure your phone has the casting function turned on. If the projector cannot be found after the operation, please turn the projector off and on again. Our manual has our after-sales contact information, if you encounter any problems, please contact us.
Come with carrier bag?
It does’t come with a carrier bag. But its value for money is worth your choice, lumens, contrast, etc.
I tried watching a movie i rented on amazon prime and the sound wouldn’t work, but when i looked at a trailer on amazon the sound came through, why?
Please turn off the Dolby sound of the movie. Due to copyright issues, Dolby sound is not supported. If you have any questions, please feel free to contact our customer service, we will send a video to show you
Can projection be reduced as small as 8×10 ?
Our 1080p projector has a 4:3 or 16:9 zoom function and cannot be downscaled to 8:10. It can also be manually corrected. If you have any other questions, our customer service will be happy to answer you.
Does it have to be totally dark to be clear of is it okaym with streetlights on around the property while we watch the movie?
The darker it’s outside, the clearer projected picture is.
Can I attach a fire stick to use with this projector?
Projector is featured multiple ports, including HDMI, USB, VGA, AV and 3.5mm audio jack. It can be easily connected to multiple media devices, such as TV sticks/boxes, Game consoles, PCs, Tablets, Laptops, DVD players, USB sticks, External speakers etc.
Do I need Bluetooth on projector?
To throw a successful movie night, you’ll need Bluetooth speakers to project sound; however, this can be difficult, depending on whether your projector has Bluetooth access or not. To connect your wireless speakers to a projector, you will need Bluetooth capability.
How do I get sound from my projector to wireless speakers?
Wireless projectors usually enable you to display slideshows and to display streaming media. The smoothness of video display depends on the speed of your connection.
What is a Wi-Fi projector used for?
The wireless projector provides users more flexibility to connect and project content with smart devices, while the wired projector is still regarded as having a more stable connection. For the rooms covered with weak Wi-Fi signals, the wired projector could be a better choice to establish a stable connection
Why do you need Wi-Fi on a projector?
You can connect your projector to Bluetooth audio devices such as speakers or headphones to output audio from a streaming device or other video source connected to the projector. Note: The Bluetooth audio device must be A2DP compliant. There may be a slight delay in audio output.
Can you connect to projector using Bluetooth?
Some projectors offer built-in wireless connectivity using computer software and a WiFi network, although the exact setup varies. The benefit is that you do not have anything plugged into the source device.
Can you connect to projector using Bluetooth?
You can connect your projector to Bluetooth audio devices such as speakers or headphones to output audio from a streaming device or other video source connected to the projector. Note: The Bluetooth audio device must be A2DP compliant. There may be a slight delay in audio output.
Can a projector work on Wi-Fi?
Some projectors offer built-in wireless connectivity using computer software and a WiFi network, although the exact setup varies. The benefit is that you do not have anything plugged into the source device.
