PEREL-EWL511-Portable-Folding-LED-Work-Light-20-W-LOGO

PEREL-EWL511-Portable-Folding-LED-Work-Light-20-W-PRODUCT

PEREL-EWL511-Portable-Folding-LED-Work-Light-20-W-PRODUCT

Introduction

To all residents of the European Union
Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Safety Instructions

  • This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
  • Risk of electroshock when opening the cover. Touching live wires can cause life-threatening electroshocks. Do not disassemble or open the housing yourself. Have the device repaired by qualified personnel.
  • Do not disassemble or open the cover. There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
  • Caution: possibly hazardous optical radiation emitted from this product. Do not look at operating lamp. Eye injury may result.
  • Caution: device heats up during use.
  • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
  • If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or his service agent.
  • The light source contained in this luminaire is not replaceable.
  • Respect a minimum distance of 1 m between the device’s light output and any illuminated surface
  • This device is not suitable for ordinary lighting in household room illumination.
  • Do not use the luminaire with a cracked or broken protective glass. Have it repaired by a qualified technician.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

  • Keep this device away from extreme temperatures.
  • Protect this device from shocks and abuse. Avoid brute force when operating the device.
  • Familiarise yourself with the functions of the device before actually using it.
  • All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
  • Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
  • Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
  • Use the original packaging if the device is to be transported.
  • Keep this manual for future reference.

Overview

Refer to the illustrations on page 2 of this manual.

PEREL-EWL511-Portable-Folding-LED-Work-Light-20-W-1

1 protective glass
2 handle
3 bracket fixing knob

Operation

General Use 

  1. Place your work light on a flat and stable surface.
  2. Insert the power plug into the mains to switch it on.
  3. Switch off after use by pulling the plug from the mains.

Mounting bracket 

  1. Slightly loosen the fixing knob.
  2. Adjust the mounting bracket as desired.
  3. Re-tighten the fixing knob.

Cleaning and Maintenance

  • All screws should be tight and free of corrosion.
  • The housing, the visible parts, the mounting supports and the installation location (e.g. ceiling, suspension, trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting supports, do not change the location of the connections…
  • Mechanically moving parts must not show any signs of wear and tear.
  • If the protective glass is damaged, have it repaired immediately by a qualified technician. Do not use the lamp with a cracked or broken protective glass.
  • Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
  • There are no user-serviceable parts.
  • Contact your dealer for spare parts if necessary.

Technical Specifications

EWL511 

electrical data

  • total nominal power ……………………………………………………………………. < 10 W
  • nominal voltage driver …………………………………………………. 220-240 V~, 50 Hz
  • power factor ……………………………………………………………………………….. > 0.9
  • energy consumption ………………………………………………………. 0.01 kWh/1000 h

light technical data

  • colour ……………………………………………………………………………… neutral white
  • colour temperature ……………………………………………………………………… 4000 K
  • beam angle …………………………………………………………………………………. 120°
  • luminous flux …………………………………………………………………………… 1000 lm
  • colour rendering index ………………………………………………………………………. 80
  • starting time …………………………………………………………………………….. < 0.5 s
  • warm-up time (60 %) …………………………………………………………………. < 0.5 s
  • luminous intensity ……………………………………………………………………………… –

lifespan

  • nominal life time ……………………………………………………………………… 30.000 h
  • number of switching cycles ……………………………………………………………. 15.000
  • dimensions and weight
  • dimensions LED module ………………………………………….. 154.9 x 112.1 x 30 mm
  • weight ……………………………………………………………………………………….908 g
  • IP rating ……………………………………………………………………………………… IP65
  • power cord length ………………………………………….. 1.5 m (H05RN-F 3G1.0 mm²)

EWL512

electrical data

  • total nominal power ……………………………………………………………………. < 20 W
  • nominal voltage driver …………………………………………………. 220-240 V~, 50 Hz
  • power factor ……………………………………………………………………………….. > 0.9
  • energy consumption ………………………………………………………. 0.02 kWh/1000 h

light technical data

  • colour ……………………………………………………………………………… neutral white
  • colour temperature ……………………………………………………………………… 4000 K
  • beam angle …………………………………………………………………………………. 120°
  • luminous flux …………………………………………………………………………… 2050 lm
  • colour rendering index ………………………………………………………………………. 80
  • starting time …………………………………………………………………………….. < 0.5 s
  • warm-up time (60 %) …………………………………………………………………. < 0.5 s
  • luminous intensity ……………………………………………………………………………… –

lifespan

  • nominal life time ……………………………………………………………………… 30.000 h
  • number of switching cycles ……………………………………………………………. 15.000
  • dimensions and weight
  • dimensions LED module ………………………………………….. 209.4 x 148.6 x 30 mm
  • weight …………………………………………………………………………………….. 1345 g
  • IP rating ……………………………………………………………………………………… IP65
  • power cord length ………………………………………….. 1.5 m (H05RN-F 3G1.0 mm²)

EWL513

electrical data

  • total nominal power ……………………………………………………………………. < 10 W
  • nominal voltage driver …………………………………………………. 220-240 V~, 50 Hz
  • power factor ……………………………………………………………………………….. > 0.9
  • energy consumption ………………………………………………………. 0.01 kWh/1000 h

light technical data

  • colour ……………………………………………………………………………… neutral white
  • colour temperature ……………………………………………………………………… 4000 K
  • beam angle …………………………………………………………………………………. 120°
  • luminous flux …………………………………………………………………………… 1000 lm
  • colour rendering index ………………………………………………………………………. 80
  • starting time …………………………………………………………………………….. < 0.5 s
  • warm-up time (60 %) …………………………………………………………………. < 0.5 s
  • luminous intensity ……………………………………………………………………………… –

lifespan

  • nominal life time ……………………………………………………………………… 30.000 h
  • number of switching cycles ……………………………………………………………. 15.000
  • dimensions and weight
  • dimensions LED module ………………………………………….. 154.9 x 112.1 x 30 mm
  • weight ……………………………………………………………………………………….908 g

Use this device with original accessories only. Velleman Group nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website  www.velleman.eu. The information in this manual is subject to change without prior notice. © COPYRIGHT NOTICE The copyright to this manual is owned by Velleman Group nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Documents / Resources

PEREL EWL511 Portable Folding LED Work Light - 20 W [pdf] User Manual
EWL511, EWL512, EWL513, Portable Folding LED Work Light - 20 W

References

Leave a comment

Your email address will not be published. Required fields are marked *