PAINTAUDIO - logoMIDI Captain MINI 6

MIDI Captain MINI 6 Controller with HID Multi State Cycling

With Super Mode MIDI Switches Configuration PAINTAUDIO MIDI Captain MINI 6 Controller with HID Multi State Cycling

The manual is subject to updates without prior notification. The content may not match the latest firmware. See www.paintaudio.com

Interfaces

PAINTAUDIO MIDI Captain MINI 6 Controller with HID Multi State Cycling - interface

Special Reminder PAINTAUDIO MIDI Captain MINI 6 Controller with HID Multi State Cycling - Special ReminderThe SV special power output on PIN 1 may conflict with custom power outputs from other devices. To avoid this issue, you can use a MIDI cable with only PIN 4 and 5 connected (our cables are designed this way)

Key Names for Configuration

PAINTAUDIO MIDI Captain MINI 6 Controller with HID Multi State Cycling - key namesThis picture s representing the correspondence between key customization settings n USB mode and the actual physical keys

Firmware & Function Brief

The device s equipped with the latest MIDI Captain series firm­ ware program, known as Super Mode. Pressing and hold the keyO foot switch (for MIDI Captain ONE, there is only one foot switch, keyO) while inserting the power or turning on the device allows you to enter USB mode to customize the functions of all foot switches.
We have developed a simple language for configuring.
Super Mode supports four key states: press, short release, long press, and ong release, each executing different sets of com­ mands, which can be a single command or multiple commands.
The program even has no limit on the number of commands for each action, something that Normal mode and Geek mode in the previous MIDI Captain firmware couldn’t achieve.
We have also created a function where a single foot switch can be triggered multiple times in a loop. By configuring the “keytimes” parameter, we can make a foot switch do different things when pressed multiple times. For example, with keytimes = 2, we can make the foot switch perform common CC toggle commands or switch between two PC commands. f keytimes = 5, we can create a sequence of 5 different command sets that are triggered sequen­ tially. The maximum value for keytimes is 9.
In summary, through the combination configuration of the four key states of the foot switch and multiple trigger events, we can enable the MIDI foot controller to achieve unprecedented and rich functional combinations.
Configuration Language Brief
keytimes = [x] where x refers to the number of different actions when the key s pressed multiple times.
led mode= [select] or it can also be normal or tap. This setting s used to indicate the LED display for the foot switch. n select mode, only the LED corresponding to the currently selected switch s lit at any given time. Normal means displaying the set color normally, and tap is a blinking action.
ledcolorX = [OxffOOOO][OxOOffOO][OxOOOOff], where X is the num­ ber of times the key is pressed, and it represents the color of the LED lights when the key s pressed for the Xth time. Each set of three LEDs on the ring can be independently configured. short_dwX, short_upX, longX, long_upX correspond to the four action states: Xth short press, short release after Xth press, ong press, and release after long press, respectively.
short_upl = [l][PC][3][-] [16][CC][127l[O] [4][NT][60][127] The commands after the equal sign represent a set of commands.
Every four parameters form one command, and multiple com­ mands can be consecutive. The first parameter is the MIDI channel value, the second parameter is the MIDI command type (which can be PC, CC, or NT – note), and the third and fourth parameters are the corresponding command ID and value.
Get Support from Us
This manual provides an introduction to the basic functions only.
Please follow these on ine resources for continuous updates or to ommunicate with the development team:
Official website www.paintaudio.com Find the product descrip­ tion page and the FAQ section at the bottom. We will also upload firmware updates to the product page promptly.
Wilson’s YouTube page: https://www.youtube.com/@Wilson­
PaintAudio/videos – Here, the latest video introductions, product reviews, and other related content will be uploaded first.
Our email contacts: support@paintaudio.com, contact@paintaudio.com, wilson-zuo@paintaudio.com.
If you have purchased through Amazon, you can also contact us through the Amazon backend messaging system.
Thank you!
Warranty

  • Model
  • Signature
  • Date of Sales
  • Address
  • SN
  • Distributor
  • Invoice No.
  • Others

This product comes with free maintenance service for a period of 12 months from the date of purchase, excluding the following situations: force majeure damage, man-made damage, unauthorized disman­ tling and repair, and other circumstances stipulated by laws and regulations.
Qualification

  • MODEL
  • CHECKER
  •  DATE

PAINTAUDIO - logo

Documents / Resources

PAINTAUDIO MIDI Captain MINI 6 Controller with HID Multi State Cycling [pdf] Owner's Manual
MIDI Captain MINI 6 Controller With HID Multi State Cycling, MIDI Captain MINI 6, Controller With HID Multi State Cycling, HID Multi State Cycling, State Cycling, Cycling

References

Leave a comment

Your email address will not be published. Required fields are marked *