XEN Xcelerate

Instructions for Use

XEN Xcelerate is a ready-to-use, pH-neutral, pretreatment foam formulated for point-of-use treatment of medical instruments and devices, including ophthalmic equipment, prior to transport. Xcelerate penetrates and loosens surgical soils, prevents them from drying and enhances the cleaning process.

The water-based foam spray breaks down quickly for better visibility of sharps.

A white spray bottle labeled 'XEN Xcelerate' is depicted.

Directions for Use

1. Place instruments into transport container. Ensure box locks and hinges are open and instruments are separated and disassembled per manufacturer's IFU.
2. Shake bottle before use.
3. Turn the nozzle of the spray head to the ON position.
4. Immediately after use and prior to transport, spray generously on soiled instruments, ensuring complete coverage. If soil has already dried, leave Xcelerate on instruments for a minimum of 1 hour.
5. Prior to the next reprocessing step, rinse instruments thoroughly to remove any residual soils and product.

Caution

• Do not mix with other chemicals.
• Thoroughly rinse instruments prior to subsequent reprocessing step.
• Wear correct PPE and follow applicable guidelines. Additional information on SDS.
• Check material compatibility before use.
• Dispose of contents and container in accordance with local, regional, national, and international regulations.

Contains xanthan gum. For more ingredient information, visit www.getinge.com.

Storage Information

Store in a cool, dry place protected from frost and away from acids and strong oxidizing agents. Store upright in original containers. Optimum storage temperature 41°F-77°F (5°C-25°C).

Material Compatibility

• = The product is suitable for the material

• = Pay special attention to the guidelines from the instruments/device manufacturer

Teflon™ is a trademark of Chemours.