One Light 89040L Dali And Push To Dimm Driver

One Light 89040L Dali And Push To Dimm Driver

Adjustable Output

Adjustable output using DIP switches.

Adjustable Output

Wiring Diagram

Push to DIM wiring diagram

Wiring Diagram

DALI wiring diagram

Wiring Diagram

Specification

Input Voltage & Frequency230V AC 50/60 hz
Power Factor2:0.95
Operating TemperatureTa: -25°C – + 45°C Tc: +90°C
Output Current300mA350mA400mA450mA500mA550mA600mA650mA700mA750mAS00mA850mA900mA950mA1000mA1050mA
Output Voltage10-42v10-42v10-42v10-42v10-42v10-42v10-42v10-42v10-42v10-42v10-42v10-40v10-40v10-40v10-40v10-40v
Output Power (Max.)3-12,6W3,5-14,7W4-16,SW4,5-18,9W5-21W5,5-23,1W6-25,2W6,5-27,Jw7-29,4W7,5-31,Sw8-33,6W8,5-34W9-36W9,5-38W10-40W10,5-42
Uout (Max.)55V

LED Current Selection

The driver’s output current can be selected by adjusting the DIP switches.

Warning: Before use, make sure the correct output current is set.
LED Current Selection

Push to DIM

  • ON/OFF: short push (<0,4s).
  • Dimming: press and hold (>0,9s).
  • Dimming up or down: every time you press and hold,dimming changes direction.
  • Built-in memory: light returns to the previous dimming level when is switched OFF and ON again, even after power failure.
    Push to DIM

Synchronization

Up to 15 pcs LED drivers can be connected to the same push button. This means there is no need for any additional sync cables in large installations, where many drivers should be controlled by one push button. If more than one driver is connected to the same push button, in order to achieve synchronization, the following action is required: Press and hold switch for more than 1 Ss. Fixtures will DIM / Switch OFF and restart.

Warnings:

  1. Make sure that the product is installed properly before connecting to electricity.
  2. Do not cover the fitting.
  3. Maintenance and installation should only be carried out by a professional electrician.

Customer Support

Symbols Symbols

www.1-light.eu

Logo

Documents / Resources

One Light 89040L Dali And Push To Dimm Driver [pdf] Instruction Manual
89040L, 89040L Dali And Push To Dimm Driver, 89040L, Dali And Push To Dimm Driver, And Push To Dimm Driver, Push To Dimm Driver, To Dimm Driver, Dimm Driver, Driver

References

Leave a comment

Your email address will not be published. Required fields are marked *