OMNIKLAD - logoWLSA04 Freedom Charge
User Manual

OMNIKLAD WLSA04 Freedom Charge

Thank you for choosing our Omniklad freedom charge cable with. To ensure optimal performance from this product, please read this user manual carefully and keep it safe for future reference, along with your receipt.

Safety Guidelines

  • Do not disassemble the product in an attempt to modify, repair, or for any other purpose.
  • Do not store in high temperatures such as intense sunlight t or other forms of heat.
  • Do not place any magnetic strip cards or similar items (e.g. credit cards, ATM cards, boarding passes, etc.) near this product as the magnetic data on this product may get damaged.
  • Do not drop, knock, or shake this product. Keep your product in a dry area. Humidity and liquids may damage the parts or electronic circuits.
  • Use the original or a certified cable only.
  • This is a mobile device and it is intended for desktop use.

Product Features

OMNIKLAD WLSA04 Freedom Charge - product features

What’s inside

OMNIKLAD WLSA04 Freedom Charge - inside

Operating Instructions

OMNIKLAD WLSA04 Freedom Charge - oparetingViewing anglesOMNIKLAD WLSA04 Freedom Charge - Viewing angles

Product Specifications

Model: WLS-A04-09

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : ( 1 ) This device may not cause harmful interference, and ( 2 ) this device must acceptany interference received, including interference that may cause undesired operation. This equipment has been tested and found
to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, usesInd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.

CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to
radio or reception. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment under the following conditions:
A separation distance of 20 cm or more should be maintained between this device and persons during device operation. To ensure compliance, operation at closer to this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

Documents / Resources

OMNIKLAD WLSA04 Freedom Charge [pdf] User Manual
WLSA04, 2AYI8-WLSA04, 2AYI8WLSA04, WLSA04 Freedom Charge, Freedom Charge, Charge

Leave a comment

Your email address will not be published.