Omni, Bluetooth, Speaker,MSLM9008,SM-2927

Functions:

1. Rubber cover
2. ON/OFF Switch
3. Micro-USB input port
4. LED Indicator
5. Caribiner

What’s included:

1 x Bluetooth® Speaker (SM-2927)
1 x USB to Micro-USB Charging Cable
1 x Instruction Manual
1 x Caribiner

Tech Specifications

Playing time: up to 1.5 hr at max volume
Charging time: up to 1.5 hr
Pairing Name:Omni Outdoor

Instructions:

(Be sure to fully charge the speaker before using for the first time.
1. Charging the Speaker
• Connect the provided charging cable to a power source and to the micro USB port on the speaker (4).
The LED indicator light will glow red when
charging and turn off when fully charged.
2. Bluetooth® Setup:
• Turn ON/OFF switch(2) to ON position, LED
indicator(3) will flash BLUE.
• Turn on the Bluetooth function on mobile the device, Select “Omni Outdoor ”pairing name.
• LED will turn solid BLUE if successfully paired
* Speaker will automatically pair if the mobile device has been paired before.
• Turn ON/OFF switch(2) to OFF position to turn off the device.

SAFETY PRECAUTIONS:

• WARNING-When using this product, basic
precautions should always be followed:
1. Read all the instructions before use.
2. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
3. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
4. To reduce the risk of injury, close supervision is necessary when the 5. Do not expose the device to moisture. only after 2 or 3 complete charge and discharge cycles.
6. Do not use the device in excess of its output rating. Overload outputs above rating may result in risk of fire or injury.
7. Do not use the device if damaged or modified.4.                             8.  Damaged or modified batteries may exhibit unpredictable behavior resulting in a fire.                                                                                     9. Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of injury.         10. Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures about 104°F may cause an explosion.
11. Ensure that qualified service professionals use only identical replacement parts to ensure product safety.

FCC Statement:                                                                          Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment general uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC  rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

Omni Outdoor Bluetooth Speaker Instruction Manual Orignal PDF

Omni Outdoor Bluetooth Speaker Instruction Manual Optimized PDF

Leave a comment

Your email address will not be published. Required fields are marked *