Kraus KPF-1603 Artec Pro Function Commercial Style Kitchen Faucet Instruction Manual

Instruction Manual for Kraus models including: KPF-1603 Artec Pro Function Commercial Style Kitchen Faucet, KPF-1603, Artec Pro Function Commercial Style Kitchen Faucet, Function Commercial Style Kitchen Faucet, Commercial Style Kitchen Faucet, Style Kitchen Faucet, Kitchen Faucet, Faucet

14

Installation Manual (PDF)

Kraus KPF-1603SBBG Artec Pro 2-Function Commercial Style Pre-Rinse Kitchen Faucet with Pull-Down Spring Spout and Pot Filler, Black Stainless Steel/Brushed Gold

Kraus KPF-1603BGMB Artec Pro 2-Function Commercial Style Pre-Rinse Kitchen Faucet with Pull-Down Spring Spout and Pot Filler, Brushed Gold/Matte Black - Amazon.com

KRAUS Artec Pro (1 st Gen) Commercial Style Pre-Rinse Single Handle Kitchen Faucet (No Pull Down) with Pot Filler in Spot Free Antique Champagne Bronze,KPF-1603SFACB 1st Gen Faucet Spot Free Antique Champagne Bronze

‎KPF-1603SFACB Installation Manual (PDF) ‎Kraus ‎Kraus KRAUS,Artec,Pro,(1,st,Gen),Commercial,Style,Pre-Rinse,Single,Handle,Kitchen,Faucet,(No,Pull,Down),with,Pot,Filler,in,Spot,Free,Antique,Champagne,Bronze,KPF-1603SFACB,1st,Gen,Faucet,Spot,Free,Antique,Champagne,Bronze,B0B9QWYC9K,B09B1BJYJ8,B081DKGXJ6,B09B1BVLMR,B07NC4VQHF,B087YWN2FM,B09B1BD779

File Info : application/pdf, 14 Pages, 4.74MB

C1UHYASqShL

INSTALLATION MANUAL
Artec ProTM 2 Function Commercial Style Kitchen Faucet
KPF-1603
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2023 Kraus USA Plumbing LLC I Rev. April 11, 2023

Congratulations on the purchase of your new KrausR plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:
STOP DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available and retain a copy of your receipt with purchase date for reference. If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.
2

STOP
Prior to Installation:
· Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact KrausR Customer Service at 800-775-0703 for a replacement.
· Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation.
· Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
· Pre-drilled hole size requirement: 1 3/8" (min) · Max countertop thickness: 2 3/8"
For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or Customerservice@kraususa.com
Tools Required

Adjustable Wrench

Phillips Screwdriver

Silicone Sealant

Safety Goggles

Pipe Tape

Care & Maintenance

To keep the product clean & shining, follow the steps below:

Rinse with clean water & dry with a soft cloth

Do not clean with soaps, acid, polish, abrasives or harsh cleaners

ACID

Do not use cloth with a coarse surface

Unscrew the aerator and clean when necessary

This installation manual is subject to change without further notice.

Diagram and Parts List
A

A. Faucet Body B1. Seat B2. Rubber Washer B3. Metal Washer B4. Mounting Nut B5. Screw C. Hex Wrench

B1 B2 B3 B4 B5
C

Faucet Dimensions
4 1/8"
(106.5mm)

7 1/8"
(182.6mm)

24 3/4"
(628.7mm)

6 5/8"
(173.3mm)

2 3/8"
(60mm)

6"
(153.2mm)
7 5/8"
(198.2mm)
9 3/4"
(248.2mm)

MAX. 2 3/8"
(60.8mm)

3/8" Compression
Installer Tip:
Shut off main water supply before installing new faucet.
5

Step 1. Remove washer and lock nut A

Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the mounting hardware (B) from the faucet body (A).

Step 2. Installing the faucet

Insert the faucet through the hole in the sink or countertop. From underneath the sink, attach the seat (B1), rubber washer (B2), metal washer (B3), and nut (B4). Lock nut (B4) into position by tightening screws (B5).

Step 3. Making the water supply connections
Push the quick connector (2) firmly upward and attach it to the receiving block (1). Pull down moderately to ensure the connection has been made.
If it is necessary to remove the quick connector (2), squeeze the tabs on the hose and then pull down to disconnect.
1 2

Step 4. Making the water supply connections

Thread the nut (1) on the supply

line onto the outlet of the water

supply valve and tighten with a

wrench. Do not overtighten.

NOTE: Please make sure filter washers are installed before connecting to the main valve.

Step 5. Flushing and checking for leaks

Pull the hose assembly out of the spout and remove the spray head by unscrewing it from the hose in a counterclockwise direction. Be sure to hold the end of the hose down into the sink and turn the faucet on to the warm position where it mixes hot and cold water.
Flush the water lines for one minute. This flushes away any debris that could cause damage to internal parts. Check for leaks.
Reinstall the spray head by hand tightening it back onto the spray hose.

NOTES: 1. Do not lose the rubber washer (1)

when installing the sprayer back on.

2. The magnet end marking with a

black dot should be toward the hose

for correct magnet installation.

Step 6. Flush faucet
1

To activate the spray mode, simply press the handle (1) located under the spray head.

Replacement Parts

Replacement Parts List

Finish / Color

Part #

1. Spray Head

CH,SFS,SBBG,SFSB,SFACB, KP27060

MBSB,BG,SFSMB,BGMB,MB**

2. Magnet

KP27061

3. Spray Hose

BLBG,BLSFS,BLSB,BLSFACB KP27062*

Assembly

GRCH,GRSFS,BLSFSB,BLMB*

4. Spring

CH,SFS,BG,SB,SFACB,SFSB,MB** KP27063

5. Inverter

KP27080

6. Spray Support

CH,SFS,SBBG,SB,BG,MB KP27064

Assembly

SFSMB,BGMB,SFACB,SFSB**

7. Spout Nut

CH,SFS,BG

KP27065

MB,SB,SFACB,SFSB**

8. Spout

CH,SFS,SB,BG,MB,

KP27066

9 10
18 19
20

111213

9. Diverter 10. Aerator Assembly
11. Cartridge 12. Bonnet Nut 13. Cap 14. Handle Assembly

SFACB,SFSB** CH,SFS,BG,MB,SB,
SFACB,SFSB**
CH,SFS,BG,MB,SFACB** CH,SFS,BG,MB,SFACB**

KP27067 KP27068
KP27069 KP27070 KP27071 KP27072

21 23

15. Rubber & Metal Washer
16. Mounting Nut & Nut

KP27028 KP27079

**Denotes faucet component color options: CH - Chrome SFS - Spot Free Stainless Steel

17. Block 18. Flange 19. Seat

KP27073 CH,SFS,BG,SB,SFACB,SFSB,MB** KP27077
KP27078

MB - Matte Black BG - Brushed Gold SB - Black Stainless SBBG - Black Stainless/Brushed Gdol

20. 1.8GPM Flow Restrictor
21. Quick Connect

WH**

KP27074 KP27076

MBSB - Matte Black/Black Stainless

22. Hex Wrench

KP27020

SFSB - Spot Free Black Stainless BGMB - Brushed Gold/Matte Black

23. Filter Washers

KP27167

SFSMB - Spot Free Stainless Steel/Matte Black SFACB - Spot Free Antique Champagne Bronze BL - Black WH - White

*Denotes spray hose assembly color options: Spray hose assembly color options: Black hose w/ Brushed Gold connector (BLBG), Black hose with Spot-Free Stainless connector (BLSFS), Black hose with Black Stainless

connector (BLSB), Black hose with Matte Black connector

(BLMB), Gray hose with Chrome connector (GRCH), Gray

hose with Spot-Free Stainless connector (GRSFS); Black hose

with Spot-Free Antique Champagne Bronze connector

(BLSFACB); Black hose with Spot-Free Black Stainless

connector (BLSFSB)

Troubleshooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

PROBLEM Leakage under the handle.
The aerator has an irregular or reduced water flow.

CAUSE Bonnet nut (12) has come loose.
The aerator is dirty or misfitted.

ACTION
Remove the index (14.3). Loosen set screw (14.2) with hex wrench (14). Remove the handle (14.1). Unscrew cap (13) (by hand only). Tighten bonnet nut (12) with an adjustable wrench
Remove the aerator and check for debris. Ensure that the rubber washer is properly installed.

The water pressure is low.

The connector underneath the deck is clogged with debris. The aerator is clogged.
The screen filters in the hose connectors are dirty.

Turn off the water supply and disconnect the connector / aerator. Unscrew the connector / aerator and clean under running water. Screw the connector / aerator back. Test water flow. If water pressure is still low then replace the connector / aerator.
Turn off the water supply at the water valves and unscrew the hose connectors from water supply lines. Clean the screens in the water lines with hot water, removing any debris or calcium build up.

Codes/Standards Applicable:

NSF/ANSI 372 NSF/ANSI/CAN 61: Q 1

U PC

LEAD FREE I A PMOR & T

NSF/ANSI 61

ASME A112.18.1 1.8GPM 6.8L/min maximum

Faucet - Lifetime Limited Warranty
KrausR USA Plumbing, LLC ("Kraus") extends this warranty to the original purchaser for personal household use of the Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.
Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
Kraus warrants the Faucet's sprayhead assembly (including the engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year from the date of purchase.
Kraus warrants the Faucet's cartridge to be free from defects in material and workmanship under normal usage for a period of five (5) years from the date of purchase.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.

Commercial Warranty
Kraus USA Plumbing, LLC ("Kraus") warrants its Products for a period of one (1) year to commercial purchasers of Products used in industrial, commercial and business applications.
Care and Cleaning Instructions
Certain cleaning products may cause damage to a Product's finish and use of the following on the Product will void this warranty:
· Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine · Abrasive pads, steel wool or wire brushes
What is Not Covered
This warranty does not cover Products that were discontinued when purchased or display Products, whether such Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover any free gifts included with purchase.
This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the installation of bathroom and/or kitchen manufactured goods.

How to Make a Warranty Claim If you are a consumer purchaser, please contact a KrausR Customer Service Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com If you are an authorized partner, please contact a Partner Support Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8954 Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide your proof of purchase and a description of the problem. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
Limitation on Duration of Implied Warranties
Please note that some states/provinces (including Quebec) do not allow limitations on how long an implied warranty lasts, so the below limitations may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER.
Limitation of Special, Incidental or Consequential Damages Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province.
Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance
13

IMPORTANT
Register Your Kraus Product
Activate Your Warranty Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
R
www.kraususa.com

References

AutoCAD 2022 - English 2022 (24.1s (LMS Tech)) pdfplot16.hdi 16.01.051.00000