User Guide for kramer models including: ACC3-12-SP, ACC3-12-SP 1 2 CAT Cable Splitter, 1 2 CAT Cable Splitter, Cable Splitter, Splitter

ACC3-12-SP

1:2 CAT Cable Splitter

Rebecca Nissenbaum

ACC3–12–SP–Quick Start

ACC3-12-SP 1:2 CAT Splitter

ACC3-12-SP Quick Start Guide

4 hours ago — Go to www.kramerav.com/downloads/ACC3-12-SP to download the latest user manual and check if firmware upgrades are available. Step 1: Check what's in the box.

16 hours ago — This guide helps you install and use your ACC3-12-SP for the first time. Go to www.kramerav.com/downloads/ACC3-12-SP to download the latest user manual and ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 2 Pages, 313.74KB

Scan for full manual

ACC3-12-SP Quick Start Guide
This guide helps you install and use your ACC3-12-SP for the first time. Go to www.kramerav.com/downloads/ACC3-12-SP to download the latest user manual and check if firmware upgrades are available.

Step 1: Check what's in the box
ACC3-12-SP 1:2 CAT Cable Splitter 1 Quick start guide

1 Bracket set

4 Rubber feet

Step 2: Get to know your ACC3-12-SP

# Feature 1 CAT A+B RJ-45 Port
2 CAT A RJ-45 Port 3 CAT B RJ-45 Port

Function
Connect to a compatible CAT transmitter (for example an SWT3-41-U-T) to send combined signals over the A+B port.
Make sure the Dual CAT extension is set to active via CAT transmitter embedded webpages.
Connect to a compatible CAT receiver (for example an EXT3-UE-R, EXT3-U-R). Connect to a compatible CAT receiver (for example an EXT3-UE-R, EXT3-U-R).

Step 3: Mount ACC3-12-SP

Install ACC3-12-SP using one of the following methods:

· Attach the rubber feet and place the unit on a flat surface.

· Fasten a bracket (included) on each side of the unit and attach it to a flat surface (see www.kramerav.com/downloads/ACC3-12-SP).

· Mount the unit in a rack using the recommended rack adapter (see www.kramerav.com/product/ACC3-12-SP).

· Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
· Avoid uneven mechanical loading. · Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits. · Reliable earthing of rack-mounted equipment should be maintained.

ACC3-12-SP Quick Start

P/N: 2 9 0 0 - 3 0 1 6 8 1 QS

Rev: 2

Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your ACC3-12-SP.



References