KOHLER Kitchen and Bathroom
KOHLER Kitchen and Bathroom
Owner's Manual for KOHLER models including: K-25048-ET Stanwell Blowout Urinal, K-25048-ET, Stanwell Blowout Urinal, Blowout Urinal, Urinal
File Info : application/pdf, 2 Pages, 169.08KB
DocumentDocumentStanwellTM Blowout Urinal K-25048-ET Features · Blow-out flush action · 3/4" (19 mm) top spud · Uses 0.5 to 1.0 gallons per flush Material · Vitreous china Installation · Note: If urinal is being purchased as a retrofit for K-4972, a 3/4" valve tailpiece is also required; existing 1-1/4" valve tailpiece is not compatible · Replaces K-4972-ET Recommended Products/Accessories K-23726 Drain treatment K-23725 Cast iron cleaner Optional Products/Accessories 1363456 Retrofit Flushometer Tailpiece, 3/4" Codes/Standards ASME A112.19.2/CSA B45.1 DOE - Energy Policy Act 1992 EPA WaterSense® ADA ICC/ANSI A117.1 OBC IAPMO Certification KOHLER® One-Year Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only. Color Code Description 0 White 96 Biscuit 7 Black BlackTM 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 3-22-2024 23:26 - US StanwellTM Blowout Urinal K-25048-ET 2-1/4" (57 mm) Min 3/4" Spud 18-1/2" (470 mm) 12" (305 mm) Wall Hangers 2" NPT Tap 19" (483 mm) 27" (686 mm) 40-1/8" (1019 mm) To Floor for Regular Installation 22" (559 mm) Standard Installation 14" (356 mm) ADA Installation 14-1/2" (368 mm) 24" (610 mm) Standard Installation 17" (432 mm) ADA Installation Floor Technical Information All product dimensions are nominal. Spud size: 3/4, Inlet, Top Min. Water per 0.5 gpf (1 lpf) Flush: Max. Water per 1 gpf (3.8 lpf) Flush: Designed for the above water use when installed with a water-saving flushometer. Pressure and Supply Requirements Fixture pressure min 25 psi (172.4 kPa) (static): Fixture pressure max (static): 80 psi (551.6 kPa) 2" NPT Tap 1/4" (6 mm) 6" (152 mm) Outlet Detail Notes Install this product according to the installation instructions. Refer to manufacturer's instructions and local codes for flushometer requirements. ADA, OBC compliant when installed to the specific requirements of these regulations. 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 3-22-2024 23:26 - US