User Guide for motionics models including: BlueDialFTxxxx, CR2032 Bluetooth Digital Indicator, CR2032, Bluetooth Digital Indicator, Digital Indicator, Indicator

BlueDialFlat-UserGuide

Blue Dial flat

Download – Motionics LLC


File Info : application/pdf, 2 Pages, 168.95KB

PDF preview unavailable. Download the PDF instead.

BlueDialFlat-UserGuide
Bluetooth Digital Indicator BlueDial Flat - User Guide

! Important Notes

1

NOT

Do NOT open the device. Opening causes permanent damage and voids the

warranty.

Change coin battery when low battery icon shows on indicator display to avoid

false readings.

Description
1 Zero/On Button ­ Short press when dial is off - turn on dial indicator ­ Short press when dial is on - zero dial reading ­ Long press when dial is on - turn off dial indicator
2 ABS/Preset Button ­ Short press - switch dial indicator between absolute measurement mode and relative measurement mode
­ Long press - set preset value
3 Unit Button ­ select reading in inch/mm
4 Status LED ­ Blue LED Flashing ­ Bluetooth transmitter on, waiting to be connected ­ Blue LED Solid ­ Bluetooth transmitter connected ­ Blue LED off ­ Bluetooth transmitter off
5 Dial Battery ­ insert CR2032 battery

5

4

3

1 2

Product Page

Included in the box
BlueDial Flat 1X CR2032 Battery1X User Guide 1X
Compatible Software
iOS: MultiGage Reader (download for FREE from the App Store) Android: MultiGage Reader (download for FREE from the Play Store)

MultiGage Reader App iPhone/iPad

MultiGage Reader APP Android

Quick Start
Insert CR2032 coin battery into dial indicator if it's a first-time use.
Short press Zero/ON button to turn on BlueDial Flat.
Make sure blue LED is flashing. Run one of the apps, then tap + button to enter pairing page.
Wait for the software to finish scanning nearby devices, then select BlueDialFTxxxx to connect. Once paired, BlueDial Flat readings show in the software. To turn off BlueDial Flat, long press the Zero/ON button. Bluetooth transmitter goes to sleep after 3 minutes if there is no connection. To wake up the Bluetooth transmitter, turn BlueDial Flat off for at least 5 seconds and then turn it back on.

Motionics, LLC © 2023 Motionics, LLC

www.motionics.com All Rights Reserved.

info@motionics.com Made in the U.S.A.



References

macOS Version 13.3.1 (a) (Build 22E772610a) Quartz PDFContext