User Manual for Nintendo models including: CH-JC03L Switch Joy-Con Pad, CH-JC03L, Switch Joy-Con Pad, Joy-Con Pad, Con Pad, Pad
Shenzhen Xiongchuang Chuangda Technology Co., Ltd. CH-JC03L Switch JOY-CON PAD 2BFJG-CH-JC03L 2BFJGCHJC03L ch jc03l
SWITCH JOY-CON PAD User's Manual Model: CH-JC03L make sure you read this guide before using the joy-con pad reading the guide will help you learn to use the controller properly 1. Product overview 2. Products Features This product for switch console Include the vibration and gyro-sensor functions Supports pressing the home button to wake up from sleep mode 3. How to pair joy-Con Control Complete these steps The Joy-Con can be paired to the Nintendo Switch console in the following ways: Joint pairing Simply attach the Joy-Con controllers to the console. Button pairing From the HOME Menu, select Controllers, then Change Grip and Order. While the following screen is displayed, press and hold down the SYNC Button for at least one second on the controller you wish to pair. Once paired, the player LED(s) corresponding to the controller number will remain lit. Confirm how the Joy-Con will be held How to Use the Joy-Con As a dual-controller grip Buttons to Press L Button (on left Joy-Con) + R Button (on right Joy-Con) Joy-con controllers used as dual-controller grip ZL Button (on left Joy-Con) + ZR Button (on right Joy-Con) SL Button+SR Button on each joy-con you wish to use horizontally Joy-con controller used as a solo horizontal grip 4. Specification Mass Battery Charging current Charging time Charging method Battery using time Motion sensor Approx 120g 400mah <500mA About 1 hours DC 5V About 20 hours Six axis gyroscope sensor intendo switch are registered tradem ark or a tradem ark of Nint endo Inc ,in t he japan and/or other count ries. This product is not designed, manufactured, approved,spons ored or endorsed by Nint endo. All t rademarks belong t o t heir res pect ive owners. MADE IN CHINA FCC warning 1. This device should be installed and operated with minimum distance 0cm between the radiator&your body. 2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 3. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 4. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.福昕PDF打印机 版本 7.3.4.0308