CommScope Trademarks
Owner's Manual for COMMSCOPE models including: 810010400-DB, C-001-DN-8G2-M01WH-30D-C-1000, C-001-DN-8G2-M01WH Indoor Outdoor Fiber Optic Drop Cable, C-001-DN-8G2-M01WH, Indoor Outdoor Fiber Optic Drop Cable, Fiber Optic Drop Cable, Optic Drop Cable, Drop Cable
C-DN | CommScope
File Info : application/pdf, 4 Pages, 260.61KB
DocumentDocument810010400/DB | C-001-DN-8G2-M01WH/30D/C1000 Indoor/Outdoor Fiber Optic Drop cable, 1 Fiber G657.B3 0.9mm tight buffer. Breaking load Max 2000N. Suitable for installation under overhead power lines 11kV, vertical clearance 1.8m. Fire retardant Outside plant LSZH jacket grade, suitable for drop / aerial installations of up to 68 m. Can be routed indoor. Product Classification Regional Availability Portfolio Product Type Asia | Australia/New Zealand | EMEA | North America CommScope® Fiber indoor/outdoor cable General Specifications Cable Type Construction Type Subunit Type Jacket Color Jacket Marking Jacket Marking Method Jacket Marking Text Subunit, quantity Fibers per Subunit, quantity Total Fiber Count Drop | Tight buffer All Dielectric | Non-armored Gel-free White Meters Inkjet COMMSCOPE GB OPTICAL CABLE 810010113/DB 1x G657A2 SM LSZH [DOM] [SERIAL NUMBER] [METER MARK] 1 1 1 Dimensions Cable Length Buffer Tube/Subunit Diameter Diameter Over Jacket 1000 m | 3,280.84 ft 0.9 mm | 0.035 in 3 mm | 0.118 in Representative Image ©2025 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: June 3, 2025 Page 1 of 4 810010400/DB | C-001-DN-8G2-M01WH/30D/C1000 Material Specifications Jacket Material Mechanical Specifications Minimum Bend Radius, loaded Tensile Load, long term, maximum Tensile Load, short term, maximum Compression Compression Test Method Impact Impact Test Method Strain Strain Test Method Twist Twist Test Method Optical Specifications Fiber Type Environmental Specifications Low Smoke Zero Halogen (LSZH) 30 mm | 1.181 in 300 N | 67.443 lbf 620 N | 139.382 lbf 20 N/mm | 114.203 lb/in IEC 60794-1 E3 2 N-m | 17.701 in lb IEC 60794-1 E4 See long and short term tensile loads IEC 60794-1 E1 10 cycles IEC 60794-1 E7 G.657.A2 | G.657.B3 0 °C to +40 °C (+32 °F to +104 °F) ©2025 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: June 3, 2025 Page 2 of 4 810010400/DB | C-001-DN-8G2-M01WH/30D/C1000 Installation temperature Operating Temperature Storage Temperature Cable Qualification Standards EN50575 CPR Cable EuroClass Fire Performance EN50575 CPR Cable EuroClass Smoke Rating EN50575 CPR Cable EuroClass Droplets Rating EN50575 CPR Cable EuroClass Acidity Rating Environmental Space Flame Test Listing Flame Test Method Jacket UV Resistance Water Penetration Water Penetration Test Method 0 °C to +40 °C (+32 °F to +104 °F) 0 °C to +70 °C (+32 °F to +158 °F) -40 °C to +70 °C (-40 °F to +158 °F) IEC 60794-1-2 Cca s1a d0 a2 Aerial | Drop | Ducted | Indoor/Outdoor EN 50399 IEC 60332-1-2 | IEC 60754-2 | IEC 61034-2 UV stabilized 24 h IEC 60794-1 F5 Environmental Test Specifications Temperature Cycle Temperature Cycle Test Method -30 °C to +60 °C (-22 °F to +140 °F) IEC 60794-1-22 F1 Packaging and Weights Cable weight Packaging Type 8.7 kg/km | 5.846 lb/kft CablePak® | Reel in box Regulatory Compliance/Certifications Agency Classification CHINA-ROHS ROHS UK-ROHS Below maximum concentration value Compliant Compliant Included Products CS-8V2-MP Enhanced Low Macrobending, Low Water Peak, Dispersion-Unshifted Single-mode Fiber ©2025 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: June 3, 2025 Page 3 of 4 810010400/DB | C-001-DN-8G2-M01WH/30D/C1000 * Footnotes Operating Temperature Specification applicable to non-terminated bulk fiber cable ©2025 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: June 3, 2025 Page 4 of 4