Support | Tapo
User Guide for tp-link models including: 2BCGWP110, 2BCGWP110, P110, P110 Mini Smart Wi-Fi Plug Energy Monitoring, Mini Smart Wi-Fi Plug Energy Monitoring, Smart Wi-Fi Plug Energy Monitoring, Wi-Fi Plug Energy Monitoring, Energy Monitoring, Monitoring
TP-LINK CORPORATION PTE.LTD. P110 Mini Smart Wi-Fi Plug, Energy Monitoring 2BCGWP110 2BCGWP110 p110
File Info : application/pdf, 3 Pages, 524.84KB
DocumentDocumentEnglish
Quick Start Guide
Getting Started
Mini Smart Wi-Fi Plug, Energy Monitoring
Tapo App
1. Get the Tapo app from the App Store or Google Play.
2. Follow the instructions in the Tapo app to complete the setup.
7106510125 REV1.2.0 © 2023 TP-Link
How to reset the plug?
Press & hold for 5s: Reset Wi-Fi while keeping previous settings
Press & hold for 10s: Factory reset the plug
Español (Latinoamérica)
Primeros pasos
1. Obtenga la aplicación Tapo en App Store o Google Play.
2. Siga las instrucciones de la aplicación Tapo para completar la configuración.
¿Cómo restablecer el enchufe?
Mantenga presionado durante 5 segundos:
Restablece el Wi-Fi manteniendo la configuración anterior
Mantenga presionado durante 10 segundos:
Restablecimiento de fábrica del enchufe
1. Tapo App Store
Google Play 2. Tapo
5 :
Wi-Fi
10 :
1. App StoreGoogle Play Tapo app
2. Tapo app
5 Wi-Fi
10
· · · · · ·
Pb Cd
PCB
Hg Cr+6
PBB
PBDE
1. "0.1 wt %" "0.01 wt %" 2. "" 3. ""
Supported Load Types for US Version:
100-125V, 50/60Hz, 15A, General use/Resistive 100-125V, 50/60Hz, 1/6HP, (4.4FLA/26.4LRA), Motor load 100-125V, 50/60Hz, 8A, Incandescent
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Please keep this instruction manual. This is a portable direct plug-in device. Plug the device into a suitable outlet. This device is intended for indoor use only. Keep the device away from heat sources and enclosed spaces with poor ventilation. Purpose of control: this is operating control. Operating control, Type 1.B action Impulse voltage: 1500V Pollution degree 2 NEMA Type 1 Enclosure Operation temperature: 0~40°C (32~104°F)
Support
For technical support, the user guide and other information, please visit https://www.tapo.com/support/
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Endusers and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1This device may not cause harmful interference. 2This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.