User Guide for Sam Johnny models including: HM11, HM11 Ture Wireless Headphones, Ture Wireless Headphones, Wireless Headphones, Headphones
HONG KONG NATURAL SOUND ELECTRONICS LIMITED HM11 PWK-HM11 PWKHM11 hm11
User Guide
WHAT'S IN THE BOX
HOW TO WEAR
, 3
, 3
FIRST TIME USE
Right ear into the harging box for testing
Put it into the charging box and the test is good. The white light on the right side is steady for about three seconds
Left ear into the charging box for testing
Put it into the charging box and the test is good. The white light on the left side is steady for about three seconds
SAM&JOHNNY
POWER ON & CONNECT
SAM&JOHNNY
, 10
4/10 3
RESTORE FACTORY SETTINGS
Put the headphone into the charging box, long press the charging box touch key for 10 seconds, the charging box will send waveform to the headphone, let the headphone enter the factory settings.
Press and hold for 4 seconds and the double white light will flash twice / to 10 seconds and the double white light will flash 3 times, indicating that all operations are completed.
Charging box button
/
INCOMING CALL ANSWER/REJECT
Touch control area
!
1.(85) 2. 3.CCC 4.. 5.,, 6.!
Safety information Warning!
1. Continued exposure to high noise levels (over 85 dB) can lead to permanent hearing damage. Do not listen at high volumes for long periods of time. 2. Batteries should not be replaced by yourself as there is a risk of explosion. 3. Use the corresponding specification power adapter certified by CCC for charging. 4. Do not tamper with or disassemble the headphones. Otherwise, the warranty will be voided. 5. Pay attention to your surroundings, please do not use the headset in unsafe conditions, such as driving a vehicle or crossing the street and any other activities that require you to pay attention to your surroundings. 6. Do not place in high temperature environment, there is a risk of fire!
/ PLAY / PAUSE
1
,
CHARING
1
During the charging process of the charging box, the
headphone is automatically
charged after it is fully
charged. The double red
light blinks slowly when
charging, and the white light
keeps on when fully charged
16S
16S
Charging the headphone
Charging the right headphone
White light on the right side of the charging compartment blinks slowly for 16 seconds.
Charging the left headphone
White light on the left side of the charging compartment flashes slowly for 16S
Headphone Indicator
Charging case indicator light
/
L2 R2
R( L(
() () ""2() L/R /() POWER(2)(:Power on) POWER(5)(:Power off) ()
Touch Control
Previous song Next song Volume + Volume -
Answer the phone Hang up the phone
Rejection of call
Voice wake-up
Play/Pause
Power on
Power off Interrupting an outgoing call
Press and hold the L button for two seconds while music is playing.
Press and hold the R button for two seconds while music is playing. R button double-tap (while music is playing) L button double-tap (while music is playing)
Click (incoming call) Click (on the call) when a call comes, long press the "touch zone", two seconds can reject the call (both right and left ear)
music playback state, L/R button three clicks, you can start the voice assistant
click the touch area of the headset to pause/play (both left and right headphones can be used) Press and hold the power button for about two seconds (Prompt tonepower on) Press and hold the power button for about five seconds (Prompt tonepower off)
Click (outgoing call)
/7 45mAh x2 <1.5 <1 5V/1ATYPE-C 4.9 44.5 ××3.8x1.7x1.8 ××6.5x4.1 x2.9
Product Specifications:
Talking Time/Music Play Time: 7hs Headphones:45mAh x2 Charging Time: Case<1.5hrs Headphones <1h Charging Input:5V/1A(TYPE-C) weight of individual headphones:4.9g Weight of charging box:44.5g Headphone Size: (LxWxH)3.8x1.7x1.8cm Charging Case Size: (LxWxH)6.5x4.1 x2.9cm
FCC IDPWK-HM11
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
User Guide
Adobe PDF library 16.03 Adobe Illustrator(R) 24.0