1. Mawu Oyamba
Thank you for choosing the Wisoee Digital Shower Clock. This device is designed to provide time, temperature, and a countdown timer function in environments where water exposure is common, such as bathrooms and kitchens. Its clear LCD display and multiple mounting options offer convenience and versatility.
Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your product.
Chithunzi 1: Patsogolo view of the Wisoee Digital Shower Clock.
2. Zinthu Zogulitsa
- Kuwonetsera kwa LCD Screen: Features a 2.95-inch LCD screen with large numbers for easy readability.
- Nthawi: Supports both 12-hour and 24-hour time formats.
- Sonyezani kutentha: Shows indoor temperature, switchable between Celsius and Fahrenheit.
- Nthawi yowerengera: Easy-to-set timer with four touch buttons, capable of counting down up to 99 minutes with an audible alert.
- Kukanika kwa Madzi: IP24 water resistant, suitable for water spray environments. Note: Do not immerse in water.
- Zosankha Zambiri Zoyika: Includes tabletop stand, suction cups, and a hanging mount for flexible installation.
- Kugwiritsa Ntchito Mosiyanasiyana: Suitable for bathrooms, kitchens, studies, and offices.
Figure 2: The clock demonstrating its IP24 water resistance near a sink.
3. Zamalonda Zathaview
Familiarize yourself with the components and controls of your Wisoee Digital Shower Clock.
Figure 3: Labeled diagram of the clock's display and touch panel.
- Malo owonetsera: Shows time, date, day of the week, temperature, and countdown timer.
- Setting Button (⚙️): Used to enter time/date/temperature setting mode.
- Plus Button (+): Used to increase values during setting or timer adjustment.
- Minus Button (-): Used to decrease values during setting or timer adjustment.
- Timer Setting Button (⏰): Used to activate and adjust the countdown timer.
4. Kukhazikitsa
4.1 Kuyika kwa Battery
- Pezani batire kumbuyo kwa wotchi.
- Tsegulani chivundikiro cha chipinda cha batri.
- Insert two (2) AA 1.5V batteries, ensuring correct polarity (+/-). Batteries are not included.
- Tsekani chivundikiro cha chipinda cha batri bwinobwino.
4.2 Nthawi Yoyamba ndi Kukhazikitsa Tsiku
- Press ndi kugwira ⚙️ (Setting) button for 3 seconds to enter time setting mode. The hour digits will flash.
- Gwiritsani ntchito + ndi - mabatani kuti musinthe ola.
- Press ⚙️ again to move to minute setting. Adjust with + ndi -.
- Pitirizani kukanikiza ⚙️ kuzungulira chaka, mwezi, ndi tsiku, kusintha chilichonse ndi + ndi -.
- After setting the day, press ⚙️ one more time to exit setting mode.
- Kuti musinthe pakati pa mtundu wa maola 12 ndi maola 24, dinani mwachidule batani la + batani pamene mukuwonetsa nthawi yanthawi zonse.
- To switch between Celsius and Fahrenheit temperature display, briefly press the - batani pamene mukuwonetsa nthawi yanthawi zonse.
5. Malangizo Ogwiritsira Ntchito
5.1 Time and Temperature Display
The clock continuously displays the current time, day of the week, date, and indoor temperature. The seconds count up in the bottom right corner.
5.2 Countdown Timer Function
The countdown timer can be set for up to 99 minutes, useful for managing shower times or other activities.
- Press ndi kugwira ⏰ (Timer Setting) button for 3 seconds to enter countdown timer setting mode. The minute digits will flash.
- Gwiritsani ntchito + ndi - buttons to set the desired countdown minutes (0-99).
- Press ⏰ again to start the countdown. The display will show the remaining time.
- Once the countdown reaches zero, an audible beep will sound.
- To stop the timer before it finishes, press ⏰ once. To reset the timer, press and hold ⏰ kwa 3 masekondi kachiwiri.
Figure 4: The clock used as a countdown timer during study time.
6. Kuyika Zosankha
The Wisoee Digital Shower Clock offers three versatile mounting methods:
- Tabletop Stand: Use the integrated kickstand on the back for placement on flat surfaces.
- Suction Cup: Attach to smooth, non-porous surfaces like tiles or mirrors.
- Phiri la Hanging: Utilize the hanging hole for hooks or nails.
Chithunzi 5: Kumbuyo view illustrating the mounting mechanisms.
6.1 Suction Cup Installation
For optimal adhesion, follow these steps:
- Yeretsani Pamwamba: Ensure the target surface (tile, mirror) is clean, flat, and dry. Wipe away dust, grease, and moisture with a damp nsalu, ndiye youma bwino.
- Soften Suction Cup (Optional): For improved stickiness, soak the suction cup in warm water for a short period to soften it.
- Ikani: Press the suction cup firmly onto the clean, dry surface, aligning its center. Apply pressure to expel any trapped air.
Malangizo Ofunda: It is recommended to repeat the cleaning and application steps monthly for optimal performance and to prevent the clock from falling.
Figure 6: Visual guide for suction cup installation.
7. Kusamalira
- Kuyeretsa: Wipe the clock with a soft, damp nsalu. Osagwiritsa ntchito zotsukira abrasive kapena solvents.
- Kuwonekera pamadzi: While water-resistant, avoid direct streams of water or prolonged immersion. Dry any excess water from the surface.
- Kusintha Battery: Replace batteries when the display dims or becomes erratic. Always replace both batteries simultaneously with new ones.
- Posungira: Ngati zikusungidwa kwa nthawi yayitali, chotsani mabatire kuti musatuluke.
8. Mavuto
| Vuto | Chifukwa Chotheka | Yankho |
|---|---|---|
| Chiwonetsero ndi chochepa kapena chopanda kanthu. | Mabatire otsika kapena akufa. | Replace with two new AA 1.5V batteries. |
| Clock not keeping accurate time. | Incorrect initial setting or battery issue. | Re-set the time and date as per Section 4.2. Ensure batteries are fresh. |
| Suction cup not holding. | Surface is dirty, wet, porous, or suction cup is old/hardened. | Clean and dry the surface thoroughly. Soak the suction cup in warm water to soften. Reapply firmly, expelling air. Consider using the stand or hanging option if the surface is unsuitable. |
| Countdown timer not working. | Timer not activated or set correctly. | Ensure you press and hold the ⏰ button for 3 seconds to enter setting mode, then set the time and press ⏰ kachiwiri kuti tiyambe. |
| Kuwerenga kutentha kumawoneka kolakwika. | Clock exposed to extreme temperatures or direct heat/cold sources. | Relocate the clock to a more stable environment. Ensure it's not near vents, windows, or direct sunlight. |
9. Zofotokozera
- Mtundu: Wisoee
- Nambala Yachitsanzo: JS2737
- Mtundu Wowonetsera: LCD Yamagetsi
- Makulidwe a Zamalonda: 4.06" W x 4.45" H
- Kulemera kwa chinthu: 6.7 ounces (0.19 Kilogram)
- Gwero la Mphamvu: 2 x AA Batteries (1.5V, not included)
- Zofunika: Acrylonitrile Butadiene Styrene (ABS) Pulasitiki
- Kukanika kwa Madzi: IP24 (Water spray resistant)
- Zapadera: Indoor thermometer, Countdown Timer, Calendar and Week Display, 12/24 HR Switch
- Kutentha: 0°C mpaka 37°C (32°F mpaka 98°F)
- Mtundu Wokwera: Tabletop, Wall Mount (Suction Cup, Hanging Hole)
- UPC: 709084840174
Figure 7: Clock dimensions and display features.
10. Chitsimikizo ndi Thandizo
Wisoee is committed to providing high-quality products and ensuring customer satisfaction. If you encounter any issues or believe your product is defective, please contact us directly.
Lumikizanani ndi Thandizo: For warranty claims or technical assistance, please reach out to Wisoee customer service via the Amazon platform. We aim to respond and arrange a replacement or refund within 24 hours for defective products.
Chonde sungani risiti yanu yogulira ngati umboni wogula chifukwa cha chitsimikizo.