PULITUO 20V Cordless Drill/Driver Instruction Manual

1. Zambiri Zachitetezo

Werengani machenjezo onse okhudzana ndi chitetezo, malangizo, mafanizo, ndi mafotokozedwe operekedwa ndi chida chamagetsi ichi. Kulephera kutsatira malangizo onse omwe ali pansipa kungayambitse kugunda kwamagetsi, moto, ndi/kapena kuvulala kwambiri.

Machenjezo a General Power Tool Safety:

• Chitetezo cha Malo Ogwirira Ntchito: Malo ogwirira ntchito azikhala aukhondo komanso owala bwino. Malo odzaza kapena amdima amachititsa ngozi.
• Chitetezo cha Magetsi: Mapulagi a zida zamagetsi ayenera kugwirizana ndi potulukira. Osasintha pulagi mwanjira iliyonse.
• Chitetezo Chaumwini: Khalani tcheru, yang'anani zomwe mukuchita, ndipo gwiritsani ntchito nzeru mukamagwiritsa ntchito chida chamagetsi.
• Kugwiritsa Ntchito Zida ndi Kusamalira: Osakakamiza chida chamagetsi. Gwiritsani ntchito chida choyenera chamagetsi pakugwiritsa ntchito kwanu.
• Kugwiritsa Ntchito ndi Kusamalira Chida Cha Battery: Limbikitsaninso chojambulira chomwe wopanga adachipanga.

2. Zamkatimu Phukusi

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer service.

• 1 x PULITUO 20V Cordless Drill/Driver (Model: DC7720S)
• 2 x 1.5 Ah Lithium-Ion Batteries
• 1 x Chaja cha Battery
• 4 x Wood Drill Bits (4mm, 5mm, 6mm, 8mm)
• 4 x Twist Drill Bits (4mm, 5mm, 6mm, 8mm)
• 1 x Zowonjezera Bar
• 1 x Flexible Shaft
• 10 x Short Screwdriver Bits
• 10 x Long Screwdriver Bits
• 1 x Screw Anchor Set

Image: Contents of the PULITUO 20V Cordless Drill/Driver kit, including the drill, two batteries, charger, and various bits and accessories.

3. Kukhazikitsa

3.1 Kuthamangitsa Battery

1. Ensure the battery is securely inserted into the charger.
2. Lumikizani chojambulira pamagetsi okhazikika.
3. The indicator light on the charger will show the charging status. Charge until fully indicated.
4. Disconnect the charger from the outlet and remove the battery once charging is complete.

Image: A 20V Lithium-Ion battery for the PULITUO drill, showing its design and connection points.

3.2 Installing/Removing Battery

1. To install: Align the battery with the base of the drill and slide it in until it clicks into place.
2. To remove: Press the release button on the battery and slide it out from the drill.

3.3 Kuyika / Kuchotsa Zobowola

1. Tembenuzani chuck molunjika kuti mutsegule nsagwada.
2. Insert the desired drill bit or screwdriver bit into the chuck.
3. Tembenuzani chuck mozungulira kuti mutseke nsagwada mozungulira pozungulira.
4. To remove: Rotate the chuck counter-clockwise to loosen and pull out the bit.

Image: Close-up of the PULITUO 20V Cordless Drill/Driver, highlighting the 3/8" keyless chuck and other features.

4. Malangizo Ogwiritsira Ntchito

4.1 Kuyatsa/Kuzimitsa ndi Kuthamanga Kosinthasintha

• To turn on, press the variable speed switch. The speed increases with more pressure.
• To turn off, release the variable speed switch.
• The integrated LED light illuminates the work area when the trigger is pressed.

4.2 Chosinthira cha Kutsogolo/Kubwerera

• Kanikizani switch kumanzere kuti muzungulire kutsogolo (zomangira zobowola/zoyendetsera mkati).
• Kanikizani switch kumanja kuti mutembenuze kumbuyo (kuchotsa zomangira).
• Ensure the switch is in the center position to lock the trigger and prevent accidental startup.

4.3 Speed Settings (0-400 RPM / 0-1500 RPM)

The drill features two-speed settings for different applications:

• Liwiro Lochepa (0-400 RPM): Ideal for driving screws and working with softer materials where more torque and less speed are required.
• Liwiro Lalikulu (0-1500 RPM): Suitable for drilling into harder materials like wood or metal, requiring higher rotational speed.

Image: Diagram illustrating the two-speed settings of the PULITUO 20V Cordless Drill/Driver, recommending low speed for screwdriving and high speed for drilling.

4.4 Torque Adjustment (21+1 Settings)

The torque collar allows you to adjust the amount of rotational force applied by the drill. This prevents over-tightening screws and damaging materials.

1. Rotate the torque collar to select the desired setting from 1 to 21. Lower numbers are for smaller screws and softer materials, higher numbers for larger screws and harder materials.
2. The drill icon setting is for drilling applications, providing maximum torque without clutch engagement.

Image: Visual representation of the 21+1 torque adjustment settings on the PULITUO 20V Cordless Drill/Driver, showing different applications like screw driving, drilling wood, and drilling metal.

4.5 Mapulogalamu

This drill is suitable for various tasks including:

• Drilling into wood, metal, and plastic.
• Kuyendetsa ndi kuchotsa zomangira.
• Kusonkhanitsa mipando.
• General home repairs and DIY projects.

Chithunzi: Eksamples of various applications for the PULITUO 20V Cordless Drill/Driver, including drilling wood, screw driving, drilling metal, and drilling in corners.

5. Kusamalira

5.1 Kuyeretsa

• Keep the ventilation slots of the power tool clean to prevent overheating.
• Gwiritsani ntchito zofewa, damp nsalu yoyeretsera kunja kwa chida. Musagwiritse ntchito mankhwala amphamvu kapena zotsukira zowawa.
• Regularly clean the chuck jaws to ensure proper grip on bits.

5.2 Kusungirako

• Store the drill and accessories in a dry, secure place, away from direct sunlight and extreme temperatures.
• Ensure batteries are fully charged before long-term storage and recharge them periodically (every 3-6 months) to maintain battery health.

6. Mavuto

7. Zofotokozera

8. Chitsimikizo ndi Thandizo

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official PULITUO webmalo. Sungani umboni wanu wogula pazolinga zilizonse za chitsimikizo.