nVent HOFFMAN AWDH2430N4SS Deep-Hinged Window Kit Instruction Manual

Part Lest

Notes:

1. Position the template (item2) in the desired location on the door and tape in place as shown. Verify the template holes will not interfere with the gasket or latches.
2. Drill .312 inch (8mm) diameter holes through the enclosure door at the locations on the template.
3. Remove the template and assemble the window kit as shown.

Rev. B © 2018 Hoffman Enclosures Inc. PH 763 422 2211 • nVent.com/HOFFMAN P/N 89118913 89118914

Documents / Resources

nVent HOFFMAN AWDH2430N4SS Deep-Hinged Window Kit [pdf] Instruction Manual AWDH2430N4SS Deep-Hinged Window Kit, AWDH2430N4SS, Deep-Hinged Window Kit, Window Kit

References

• User Manual