nVent CADDY CCT4 Conduit Trapeze
Product Information: Conduit Trapeze CCT4
The nVent CADDY Conduit Trapeze CCT4 range is a cost-effective and efficient solution for installing larger feeder circuits of conduit in overhead trapeze installations. Made of durable steel with a pregalvanized finish, the CCT4 series reduces installation time and material cost by eliminating the need for traditional fasteners. This makes it an ideal solution for contractors looking to maximize installation efficiency.
| Material | Finish | EMT Conduit Size | Rigid Conduit Size |
|---|---|---|---|
| Steel | Pregalvanized | 4 | 4 |
The table contains maximum conduit size values, number of conduits, thickness, hole sizes, and lengths for each part number.
| Part Number | Number of Conduits | Thickness | Hole Size 1 | Hole Size 2 | Hole Size 3 | Hole Size 4 | Length 1 | Length 2 | Length 3 | Length 4 |
|---|---|---|---|---|---|---|---|---|---|---|
| CCT4X12 | 2 | 14 GA | 9/16 | 9/32 | 1/8 | 4 5/8 | 12 | 14 | 6 | 6 |
| CCT4X24 | 4 | 14 GA | 9/16 | 9/32 | 1/8 | 4 5/8 | 24 | 26 | 6 | 6 |
| CCT4X36 | 6 | 14 GA | 9/16 | 9/32 | 1/8 | 4 5/8 | 36 | 38 | 6 | 6 |
| CCT4X96 | 16 | 14 GA | 9/16 | 9/32 | 1/8 | 4 5/8 | 96 | 98 | 6 | 6 |
For more information about our powerful portfolio of brands,visit nVent.com/CADDY.
Product Usage Instructions
- Identify the appropriate part number for your installation based on the number of conduits, thickness, hole sizes, and lengths required.
- Attach the CCT4 trapeze to the ceiling or overhead structure using appropriate hardware (not included).
- Insert the conduit into the CCT4 trapeze, using the appropriate hole size based on the conduit size.
- Secure the conduit in place by tightening the trapeze around it using a nut driver or wrench.
- Continue installing conduits as needed, securing each one inplace using the same method.
CONNECT AND PROTECT
The nVent CADDY Conduit Trapeze CCT4 range is a fast and cost-effective method to install larger feeder circuits of conduit in overhead trapeze installations. The CCT4 series reduces installation time and material cost by eliminating the need for traditional fasteners, making it an ideal solution for contractors looking to maximize installation efficiency.
FEATURES
- Ideal for larger feeder circuits
- Accommodates 3/8″ threaded rod trapeze drops
- Up to 25% material savings over traditional methods
- Reduces installation time up to 50%
- Complies with UL® 2239
Material: Steel
Finish: Pregalvanized EMT Conduit Size: 4″
Rigid Conduit Size: 4″
| Part Number | Number of Conduits | Thickness T | Hole Size 1 HS1 | Hole Size 2 HS2 | Hole Size 3 HS3 | Hole Size 4 HS4 | Length 1 L1 | Length 2 L2 | Length 3 L3 | Length 4 L4 |
| CCT4X12 | 2 | 14 GA | 9/16″ | 9/32″ | 1/8″ | 4 5/8″ | 12″ | 14″ | 6″ | 6″ |
| CCT4X24 | 4 | 14 GA | 9/16″ | 9/32″ | 1/8″ | 4 5/8″ | 24″ | 26″ | 6″ | 6″ |
| CCT4X36 | 6 | 14 GA | 9/16″ | 9/32″ | 1/8″ | 4 5/8″ | 36″ | 38″ | 6″ | 6″ |
| CCT4X96 | 16 | 14 GA | 9/16″ | 9/32″ | 1/8″ | 4 5/8″ | 96″ | 98″ | 6″ | 6″ |
The table contains maximum conduit size values.
Our powerful portfolio of brands:
©2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
CADDY-DS-H88189-CCT4-USEN-2206
Documents / Resources
 | nVent CADDY CCT4 Conduit Trapeze [pdf] Owner's Manual CCT4X12, CCT4X24, CCT4X36, CCT4X96, CCT4 Conduit Trapeze, CCT4, Conduit Trapeze, Trapeze |
