nVent CADDY 12P4I Push In Conduit Clamp Owner’s Manual
FEATURES
Push-in installation of conduit
Eliminates need for offset bending conduit
May be used for either vertical or horizontal installations
SPECIFICATIONS
Finish: invent CADDY Armor
Material: Spring Steel
| Catalog Number | EMT Conduit Size | Outer Diameter(OD) | Hole Size(HS) | Hole Type | Ultimate Static Load 1(F1) | Ultimate Static Load 2(F2) |
| 12P4I | 3/4″ | 0.866″ Min, 1.181″Max, 0.752″ Nom | 1/4″ | Threaded | 25 lb | 15 lb |
| 16P4I | 1″ | 1.181″ Min, 1.378″Max, 1.000″ Nom | 1/4″ | Threaded | 25 lb | 15 lb |
| 8P4I | 1/2″ | 0.709″ – 0.866″ | 1/4″ | Threaded | 25 lb | 15 lb |
| 12P | 3/4″ | 0.866″ – 1.181″ | 9/32″ | Plain | 25 lb | 15 lb |
| 16P | 1″ | 1.181″ – 1.378″ | 9/32″ | Plain | 25 lb | 15 lb |
| 8P | 1/2″ | 0.709″ – 0.866″ | 9/32″ | Plain | 25 lb | 15 lb |
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands: +31 800-0200135
France: +33 800 901 793
Europe
Germany: 800 1890272
Other Countries: +31 13 583540
APAC
Shanghai: + 86 21 2412 1618/19
Sydney: +61 2 9751 8500″
Documents / Resources
 | nVent CADDY 12P4I Push In Conduit Clamp [pdf] Owner's Manual 12P4I Push In Conduit Clamp, 12P4I, Push In Conduit Clamp, Conduit Clamp, Clamp |
 | nVent CADDY 12P4I Push In Conduit Clamp [pdf] Owner's Manual 12P4I Push In Conduit Clamp, 12P4I, Push In Conduit Clamp, In Conduit Clamp, Conduit Clamp, Clamp |