📘 Smith's Environmental Products manuals • Free online PDFs
Smith's Environmental Products logo

Smith's Environmental Products Manuals & User Guides

British manufacturer of heating and cooling products, specializing in plinth heaters and fan convectors for residential and commercial use.

Tip: include the full model number printed on your Smith's Environmental Products label for the best match.

About Smith's Environmental Products manuals on Manuals.plus

Smith's Environmental Products is a leading UK-based manufacturer of heating and cooling solutions tailored for both residential and commercial applications. The company is best known for its space-saving innovation, the Space Saver plinth heater, which fits discreetly into kitchen plinths to free up wall space.

Smith's also produces the Kaspisk hav range of commercial fan convectors and the Økokraft series, all designed to work efficiently with hydronic central heating systems, including those powered by renewable sources like air and ground source heat pumps.

Smith's Environmental Products manuals

De nyeste manualene fra manuals+ kuratert for dette merket.

Brukerhåndbok for Smiths SS3 viftekonvektor

26. august 2025
Smiths SS3 Fan Convector INTRODUCTION Educational buildings are complex because of the differing ages of people using them and the levels of activity that take place within them. Schools must…

Brukerhåndbok for Smiths CTFF viftekonvektor

15. juli 2025
Smiths CTFF Fan Convector User Manual Smith’s CTFF fan convector designed to sit in a ceiling grid, providing efficient heating in applications where wall space is at a premium Available…

Smiths CT60 Caspian Skyline brukerveiledning

19. februar 2025
Caspian Skyline® Education | Healthcare | Leisure and sport | Office | Hospitality | Retail | Showroom CT60 Caspian Skyline Caspian Skyline CT60 fits into a 600mm x 600mm ceiling…

Smith's Environmental Products video guides

Se videoer om oppsett, installasjon og feilsøking for dette merket.

Smith's Environmental Products support FAQ

Vanlige spørsmål om manualer, registrering og støtte for dette merket.

  • Why is my Smith's fan convector not running?

    Check that the power supply is switched on via the fused spur and that the central heating system is active. The unit also requires the water temperature to be above 38°C to activate the fan.

  • How do I register my Smith's product warranty?

    You can register your product online at the official Smith's Environmental Products website under the Product Registration section.

  • Does the fan convector work with heat pumps?

    Yes, many Smith's models like the Caspian and Eco-Powerad are designed to operate effectively with lower water temperatures typical of heat pump systems (down to 40°C).

  • Where is the fuse located for my heater?

    The unit is typically connected via a double-pole 3A fused spur, which should be accessible near the installation but not directly above the heater.