KESHIDE 210

KESHIDE Digital Alarm Clock with Indoor Temperature (Model 210) - User Manual

Modell: 210

1. Viktig sikkerhetsinformasjon

To ensure proper operation and prevent damage, please observe the following:

  • Bruk 3 AAA carbon batteries bare.
  • Ikke bruk alkaliske batterier. Alkaline batteries have a high current output which can cause display malfunctions, alarm failures, or damage the clock's internal movement.
  • Sørg for at batteriene er satt inn med riktig polaritet (+/-).

2. Produktet er overview

The KESHIDE Digital Alarm Clock (Model 210) is a battery-operated clock featuring time, date, and indoor temperature display. It includes a snooze function and a night light with a sensor for enhanced visibility in low light conditions.

2.1 Foran View and Display Elements

Front view of the KESHIDE Digital Alarm Clock showing time, alarm, date, and temperature display.

Figur 1: Foran view of the KESHIDE Digital Alarm Clock.

  • Tidsvisning: Shows current hour and minutes.
  • Alarmindikator: Displays the set alarm time.
  • Datovisning: Viser måned og dag.
  • Temperaturvisning: Shows indoor temperature in Celsius or Fahrenheit.
  • AM/PM-indikator: For 12-timers format.
  • Slumre/lys-knapp: Located on top for snooze and temporary backlight activation.

2.2 Bak View og kontrollknapper

Bak view of the KESHIDE Digital Alarm Clock showing battery compartment and control buttons.

Figur 2: Bak view of the KESHIDE Digital Alarm Clock with controls.

  • 12/24 YEAR Button: Switches between 12-hour and 24-hour time format, and sets the year.
  • HOUR/MON Button: Sets the hour and month.
  • MIN/DATE, °C/°F Button: Sets the minute and date, and switches between Celsius and Fahrenheit.
  • LOCK/AL.SET/DATE.SET/TIME.SET Switch: Main mode selector for setting functions.
  • AL.ON/AL.OFF Switch: Turns the alarm on or off.
  • SENSOR ON/OFF Switch: Aktiverer eller deaktiverer den automatiske nattlyssensoren.
  • Batterirom: Har 3 AAA-batterier.

3. Oppsett

3.1 Installasjon av batteri

  1. Åpne batteridekselet på baksiden av klokken.
  2. Insert 3 new AAA carbon batteries, ensuring correct polarity (+/-).
  3. Lukk batteridekselet godt.
  4. The clock display will activate.

Important: Only use AAA carbon batteries. Do not use alkaline batteries.

3.2 Innstilling av klokkeslett og dato

  1. Slide the mode selector switch (LOCK/AL.SET/DATE.SET/TIME.SET) to TIDEN SATT.
  2. Trykk på HOUR/MON button to adjust the hour. The hour will flash.
  3. Trykk på MIN/DATO button to adjust the minute. The minute will flash.
  4. To set the year, press the 12/24 YEAR knapp.
  5. To set the month, press the HOUR/MON knapp.
  6. To set the date, press the MIN/DATO knapp.
  7. Once time and date are set, slide the mode selector switch back to LÅSE for å lagre innstillinger.
  8. For å bytte mellom 12-timers og 24-timers format, trykk på 12/24 YEAR button while in LOCK mode.
Image showing the KESHIDE Digital Alarm Clock display switching between 12-hour and 24-hour formats.

Figure 3: Switching between 12-hour and 24-hour time display.

4. Bruksanvisning

4.1 Stille inn alarmen

  1. Slide the mode selector switch to AL.SET.
  2. Trykk på HOUR/MON -knappen for å justere alarmtiden.
  3. Trykk på MIN/DATO for å justere alarmminuttet.
  4. Once the alarm time is set, slide the mode selector switch back to LÅSE.
  5. For å aktivere alarmen, skyv AL.ON/AL.OFF bytte til AL.ON. The alarm icon will appear on the display.

4.2 Slumrefunksjon

Når alarmen går:

  • Trykk på den store SNOOZE / LIGHT button on the top of the clock to activate snooze. The alarm will pause for 5 minutes and then sound again.
  • To stop the alarm completely, press any button on the back of the clock, or let it ring for one minute without intervention. The alarm will automatically stop after 60 seconds if no button is pressed.
Image showing the KESHIDE Digital Alarm Clock with a child sleeping in the background, illustrating the snooze function.

Figure 4: Snooze function in action.

4.3 Night Light and Sensor Function

  • Manuell bakgrunnsbelysning: Trykk på SNOOZE / LIGHT button on top to illuminate the display for approximately 5 seconds.
  • Automatic Night Light (Sensor): Skyv på SENSOR PÅ/AV slå på baksiden til ON. The clock will automatically emit a soft backlight in low light conditions, allowing for continuous visibility of the time.
  • To disable the automatic night light, slide the SENSOR PÅ/AV bytte til AV.
Image showing the KESHIDE Digital Alarm Clock in a dark room with its night light activated, and a close-up of the sensor switch.

Figure 5: Night light and sensor function.

4.4 Temperaturvisning

  • The clock displays the indoor temperature automatically.
  • For å veksle mellom Celsius (°C) og Fahrenheit (°F), trykk på MIN/DATE, °C/°F button while in LOCK mode.
Close-up image of the KESHIDE Digital Alarm Clock display showing temperature in Fahrenheit.

Figure 6: Temperature display and °C/°F switch.

4.5 Produktvideoguide

Video 1: Official KESHIDE guide demonstrating alarm, snooze, night light, and battery installation for the digital alarm clock.

5. Vedlikehold

  • Batteribytte: Replace batteries when the display dims or functions become unreliable. Always use 3 new AAA carbon batteries.
  • Rengjøring: Tørk av klokken med en myk, tørr klut. Ikke bruk slipende rengjøringsmidler eller løsemidler.
  • Lagring: Hvis klokken skal oppbevares over lengre tid, må du ta ut batteriene for å forhindre lekkasje.

6. Feilsøking

ProblemMulig årsakLøsning
Skjermen er svak eller tom.Low or dead batteries; incorrect battery type.Replace with 3 new AAA carbon batteries. Ensure correct polarity.
Alarm does not sound or is inconsistent.Alarm is off; incorrect battery type; alarm time not set correctly.Ensure AL.ON/AL.OFF switch is on AL.ON. Verify alarm time. Replace batteries with AAA carbon type.
Backlight is not working or is too dim.Sensor switch is off; low batteries.Check SENSOR ON/OFF switch. Replace batteries.
Tiden er unøyaktig.Battery issue; internal clock deviation.Replace batteries with AAA carbon type. Reset the time. If inaccuracy persists, contact support.
Temperature reading seems incorrect.Miljøfaktorer; sensorkalibrering.Ensure clock is not in direct sunlight or near heat sources/vents. Allow time for sensor to stabilize.

7. Spesifikasjoner

  • Merke: KESHIDE
  • Modellnummer: 210
  • Visningstype: LCD
  • Strømkilde: Battery Powered (3 x AAA carbon batteries, not included)
  • Produktdimensjoner: 6.7"W x 3"H (approximately 17cm x 7.6cm)
  • Varevekt: 5.6 unser (omtrent 159 gram)
  • Materiale: Plast
  • Spesielle funksjoner: Alarm, Calendar Display, Indoor Temperature, LED Display, Large Display, Snooze
  • Temperaturområde: 0°C ~ 50°C (32°F ~ 122°F)

8. Garanti og støtte

KESHIDE products are designed for reliability and performance. For any questions, concerns, or support needs regarding your Digital Alarm Clock (Model 210), please contact KESHIDE customer service through the platform where you purchased the product.

Even if the standard return window has closed, KESHIDE is committed to addressing customer issues. Please reach out to the seller directly for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.