Tapo C400/C401/TC80 Battery-Powered Outdoor Security Camera

1. Charge the Battery

The battery comes partially charged. It is recommended to fully charge the battery before use, which takes about five and a half hours using a 5V 1A USB charger.

2. Set Up the Camera

1. Download the Tapo app from the App Store or Google Play and log in.
2. Open the camera cover and press and hold the On/Off button for about 3 seconds to turn it on.
3. Open the Tapo app, tap the '+' button, select your camera model, and follow the app instructions to set up your camera.

Note: Images may differ from actual products.

3. Camera Mounting Tips

• Avoid placing the camera behind glass, as it will obstruct the motion sensor.
• Choose a proper location to avoid frequent false alarms. Avoid pointing the camera directly at swaying trees, vehicles and pedestrians on the road, or street lamps and sunlight.
• Do not place the camera upside down.
• Keep the motion sensor level for best results.
• Mount the camera to the side so that movement goes across the lens' field of view to better trigger motion detection and AI detection.
• For optimal detection performance, mount the camera 7-10 ft (2-3 m) above the ground.

PIR Detection Zone: The detection zone varies with wake-up sensitivity settings. The Field of View (FOV) and PIR detection zone shown are based on the camera being mounted at 7.2 ft (2.2 m).

Note: You can adjust the sensitivity in Camera Settings > Detection > Wake-up Sensitivity.

4. Mounting

1. Drill Holes: Stick the mounting template to the desired mounting place. Drill two holes according to the template (∅6 mm / 15/64 in.).
2. Unscrew the Base: Unscrew the base from the mounting bracket.
3. Secure the Bracket: Insert two anchors into the holes and use the screws to affix the bracket over the anchors.
4. Install the Camera: Screw the base onto the bracket. Install the camera on the base, adjust the angle by loosening the base, and secure it by tightening. Ensure the camera is securely attached to the camera bracket by tightening the bottom screw.

Setup Video: Scan the QR code or visit https://www.tp-link.com/support/setup-video/#cloud-cameras.

Appearance

Key Components:

• 1. IR & White Light LEDs
• 2. Lens
• 3. Microphone
• 4. Motion Sensor
• 5. Status LED
• 6. USB Type-C Charging Port: Open the cover for USB charging.
• 7. Reset Button: Press and hold for 5s to reset Wi-Fi while keeping other settings. Press and hold for 10s to reset to factory settings.
• 8. microSD Card Slot: Insert a microSD card (not included) and initialize it on the Tapo app for local recording.
• 9. On/Off Button: Press and hold for about 3 seconds to turn the camera on/off.

Camera Status LED Indication:

• Blinking amber quickly for 3 seconds: Plugging in USB charger
• Solid red: Starting up
• Blinking red and green: Ready for setup
• Blinking red slowly: Connecting to Wi-Fi
• Solid amber: Connected to Wi-Fi
• Solid green: Connected to the cloud
• Blinking red quickly: Camera resetting
• Blinking green quickly: Camera updating

? Have a Tapo Solar Panel?

The Tapo Solar Panel charges your camera continuously. Connect the solar panel by inserting the connector into the camera charging port until snug.

Note: If a third-party solar panel is used, TP-Link cannot guarantee waterproof performance.

Safety Information

TP-Link declares that this device complies with essential requirements and relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity can be found at https://www.tapo.com/support/ce.

TP-Link declares that this device complies with essential requirements and relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity can be found at https://www.tapo.com/support/ukca/.

• This equipment can be powered only by equipment complying with Power Source Class 2 (PS2) or Limited Power Source (LPS) as defined in IEC 62368-1.
• Do not use a damaged charger or USB cable.
• Use only recommended chargers.
• Do not use the device where wireless devices are not allowed.
• The adapter should be easily accessible.
• Use only power supplies provided by the manufacturer in the original packaging.
• Keep the device away from fire or hot environments. Do not immerse in water or any other liquid.
• Do not disassemble, repair, or modify the product.
• Do not place near automatically controlled devices like fire alarms, as radio waves may cause malfunction.
• Observe restrictions on using wireless products in fuel depots, chemical plants, or during blasting operations.
• Do not use liquid to clean the product; use only a dry cloth.
• Never put metal objects inside the product. If a metal object enters, turn off the circuit breaker and contact an authorized electrician.
• This product is not intended for medical care. Consult the manufacturer of personal medical devices (e.g., pacemakers) to determine if they are adequately shielded from RF energy.
• Do not use this product in healthcare facilities where equipment may be sensitive to RF energy.
• Do not place heavy objects on the product.
• Unplug the product when leaving it unused for a long time.
• This product may interfere with other electronic devices.
• Operating Temperature: -20°C to 45°C (-4°F to 113°F).
• Adapter should be used indoors where the ambient temperature is 40°C or lower.

CAUTION: Avoid replacing the battery with an incorrect type. Avoid disposal of the battery in fire or a hot oven, or mechanical crushing or cutting, which can result in an explosion. Do not leave the battery in extremely high temperatures or under extremely low air pressure, as this can result in an explosion or leakage.

Please read and follow the safety information. TP-Link is not liable for accidents or damage due to improper use.

OPERATING FREQUENCY (maximum transmitted power):

• 2402 MHz - 2480 MHz (9.54 dBm)
• 2412 MHz - 2472 MHz (19.76 dBm)

RF Exposure Information:

This device meets EU requirements (2014/53/EU Article 3.1a) for limiting public exposure to electromagnetic fields. The device complies with RF specifications when used 20 cm from the body.

This equipment complies with FCC Part 15 limits for a Class B digital device, designed to provide reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. If interference occurs, try to correct it by reorienting/relocating the antenna, increasing separation between equipment and receiver, connecting to a different outlet, or consulting a dealer/technician.

This device complies with FCC Part 15. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Unauthorized modifications may void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits for an uncontrolled environment. The device and its antenna must not be co-located or operated with any other antenna or transmitter. This grant is applicable to Mobile Configurations only. Antennas must be installed to provide a separation distance of at least 20 cm from all persons.