Commend 200 Series Intercom System
Productinformatie
Specificaties
- Model: Master Station Series
- Compatible with: GE 100, GE 200, GE 700 intercom centrals
- Series Available: 200, 400, 411
Beschrijving
Belangrijke voorzorgsmaatregelen
- Please keep this description in safe custody!
- Toepassingsmogelijkheden: As stations for the intercom centrals GE 100 (only series 400 and 411), GE 200 and GE 700.
- Aandacht:
- Never push objects of any kind into the station through loudspeaker or microphone slots.
- Ensure no liquid enters the housing.
- The station may be opened only by authorized service engineers.
- Avoid dropping the station.
- Do not expose the station to extreme temperatures.
- Schoonmaak:
- Gebruik voor het reinigen een zachte, pluisvrije doek.
- Remove stubborn stains with a cloth lightly dampened with a mild detergent solvent.
- Never use strong solvents, abrasive cleaners, or compressed air for cleaning.
- Verbinding:
- Plug the station only into predefined sockets, never into telephone or computer sockets.
- Use only the enclosed connector cable.
- Never plug other equipment into the intercom station sockets.
Gebruiksaanwijzing
Bel mij
- Dial the desired calling number.
- Talk after the Dial Tone.
- Cancel the call: X
Handset Function
- For private conversations (only EE 411, EE 420, EE 211, EE 220): Hold the loudspeaker grill to the ear.
Control Of Speech Direction
- Calls to noisy rooms may require manual control of the speech direction (Simplex).
- Talk: keep T ingedrukt.
- Listen: release T.
Called Number Busy
- Wait for automatic re-call (Busy Tone can be switched off with 0, or Intrude with T (keep button pressed while talking)).
Send Re-call Request *
- Called subscriber is busy, in privacy mode or does not answer.
- Send re-call request: 5 – Call is cancelled automatically.
- Delete re-call request: call subscriber once again, 6 – Call is cancelled automatically.
Receive Re-call Request *
- The number of the station that has called is indicated blinking in the display, the Conversation Lamp knippert.
- Answer re-call request:
F or dial the calling number (stations without function keys can also answer with 5T) – Call is set up, re-call request is cancelled automatically. - Cancel re-call request without answer: press X for at least one second.
Minute Tone
- Single Minute Tone: a call is running.
- Double Minute Tone: a call is holding for you or your conversation partner.
- Triple Minute Tone: the conversation time expires in a few seconds, but you can extend it with 77.
Inquiry *
- 0 – Tone Signal is heard.
- Dial the desired number – Talk after the Dial Tone.
- X: another number can be dialed, or X once more: back to previous conversation partner.
Transfer *
- 0 – Tone Signal is heard.
- Dial the desired number – Talk after the Dial Tone.
- Connect your conversation partner with your previous conversation partner: 0
Microphone Cut-off
- During a running call: With 7 the call can be disconnected temporarily – the waiting subscriber receives a Tone Signal (Privacy Tone) and the Conversation Lamp knippert.
- Reconnect the call with 7.
All Call / Group Call with Answer
- Initiate All Call with 00 (Group Calls with 010 to 019, depending on the programming) – Talk after Gong Signal, as soon as Conversation Lamp lichten.
- Terminate announcement: T wait for answer, or X cancel call without answer.
- Answer All Call/Group Call with TT.
Secretary Transfer
- Activate with 02 and the calling number of your secretary station – Acknowledgement Tone (EE 411/EE 211 can be turned to the side for activation).
- Deactivate with 030 – Continuous Tone (or turn back station).
Deuropener
- During running call with the Door Station: Open the door with 1.
Volg mij
- Only EE 411, EE 211.
- Own station: turn to the side to activate.
- Target station: 02 and your own calling number – Acknowledgement Tone.
- Deactivate: turn back your own station.
Conference *
- During a running call: Invite further participants: – 8 – Tone Signal is heard – Dial the desired number – Talk after the Dial Tone.
- Repeat for each participant.
- Start the conference: 8T.
- Participant who wants to talk: T.
- Terminate the conference: X.
Privacy
- Activate: 031 – Acknowledgement Tone (EE 411/ EE 211 can be turned to the side for activation).
- Answer call: any button (or turn back station).
- Deactivate: 030 – Continuous Tone (or turn back station).
Reconnect Last Call
- 0T – Talk after the Dial Tone.
Achtergrondmuziek
- Switch on: 4T1 (up to 4T8 with several music programs).
- Switch off: 4T0.
Display-Information
- Not with EE 400, EF 400, EE 470.
- Different functions depending on central type and programming, but in general:
- Idle Mode: If no call is running the own calling number is displayed, e.g.:
- Conversation: During a conversation the calling number/name of the conversation partner is displayed, e.g.:
- Waiting subscriber: A busy subscriber called by another station gets the following indication:
- Double Minute Tone
- The calling number of the waiting station is blinking in the display
- Afterwards the conversation partner is indicated again
- Privacy Function: Activated Privacy is indicated in the display, e.g.:
- During an activated Call Transfer (e.g. Secretary Transfer) the target of the transfer is indicated, e.g.:
- Display Texts can be freely programmed, e.g.:
Toonsignalen
Volume
- During a conversation the volume can be adjusted with
.
File: B_400DE.CHP
Versie: 1.4 / 1100
Type: D-BA-400DE
This equipment fulfills the requirements of the EU-standard 89/336/EWG (Electromagnetic Interferences, EN 55022/50082-1). Therefore, this station is CE-labelled.
The features depend on the type of subscriber card, the software version, and the programming.
* For central GE 100 available from software Pro 03
Veelgestelde vragen
Hoe bel ik?
Dial the desired calling number and talk after hearing the Dial Tone. To cancel the call, press X.
Documenten / Bronnen
 |
Commend 200 Series Intercom System [pdf] Gebruiksaanwijzing 400 Series, 411, 200 Series Intercom System, 200 Series, Intercom System |