Treedix Coaxial and RJ45 Network Cable Tester

1. Inleiding

The Treedix Coaxial and RJ45 Network Cable Tester (Model TRX5-0757R) is a versatile diagnostic tool designed for efficient testing of various cable types. This device supports both Coaxial (BNC or F-style) and RJ45 connectors, including shielded and unshielded network cables. It is engineered to detect common wiring faults such as short circuits, open circuits, and cross-wiring, ensuring reliable network operation and maintenance. Its portable, split design allows for both local and remote testing, making it suitable for a wide range of applications from routine checks to broadband installations and circuit repairs.

Image 1.1: The Treedix Network Cable Tester, highlighting its capability to measure shield lines with a high-sensitivity chip. The tester is shown next to network equipment.

2. Meegeleverde componenten

The package for the Treedix Coaxial and RJ45 Network Cable Tester includes the following items:

• Hoofdtesteenheid
• Testapparaat op afstand
• Gebruiksaanwijzing (dit document)

Opmerking: A 9V DC battery is required for operation and is not included in the package. Please ensure you have a 9V battery available before attempting to use the tester.

3. Instellen

3.1 Batterij installatie

The Treedix Network Cable Tester requires one 9V DC battery for power. Follow these steps to install the battery:

1. Locate the battery compartment on the back of the main tester unit.
2. Schuif het klepje van het batterijcompartiment voorzichtig open.
3. Connect a 9V battery to the battery clip inside the compartment, ensuring correct polarity.
4. Plaats de batterij in het compartiment.
5. Sluit het batterijklepje goed.

Image 3.1: The main tester unit with its battery compartment open, illustrating where to connect and insert a 9V battery.

3.2 Identifying Tester Components

Familiarize yourself with the key components and indicators of the tester:

Image 3.2: A detailed diagram labeling the BNC connectors, RJ45 connector sockets, RJ45 test indicators (PIN NO. 1-8, GND), BNC display light, and the power button with its modes (3S-ON, 1S-A/M, 5S-OFF).

• BNC-connector: For connecting coaxial cables.
• RJ45 Connector Socket: For connecting RJ45 Ethernet cables.
• RJ45 Test Indicator (PIN NO. 1-8, GND): LEDs that illuminate to show the continuity and wiring status of each pin in an RJ45 cable.
• BNC Display Light: An LED indicator for coaxial cable testing.
• Aan/uit-knop: Controls the device's power and test modes.
  • 3S-ON: Houd 3 seconden ingedrukt om in te schakelen.
  • 1S-A/M: Press for 1 second to switch between Auto and Manual test modes.
  • 5S-OFF: Houd 5 seconden ingedrukt om uit te schakelen.

4. Bediening

The Treedix Network Cable Tester can be used for both local and remote testing of RJ45 and Coaxial cables.

4.1 In- en uitschakelen

1. To power on the tester, press and hold the power button for approximately 3 seconds until the power indicator light illuminates.
2. To power off the tester, press and hold the power button for approximately 5 seconds until the power indicator light turns off.

4.2 RJ45 Cable Testing (Network Cables)

This tester supports testing of both shielded and unshielded RJ45 network cables (e.g., Cat5, Cat5e, Cat6).

1. Zorg ervoor dat de tester is ingeschakeld.
2. Connect one end of the RJ45 cable to the RJ45 port on the Hoofdtesteenheid.
3. Connect the other end of the RJ45 cable to the RJ45 port on the Testapparaat op afstand. For local testing of short cables, the remote unit can be attached directly to the main unit.
4. Observe the LED indicators (PIN NO. 1-8, GND) on both the main and remote units.
5. Normale verbinding: All 8 lights (1-8) and the GND light on both units will illuminate in sequence, indicating a correct straight-through connection.
6. Foutdetectie:
   • Open Circuit: If a specific pin's LED does not light up on either the main or remote unit, it indicates an open circuit for that wire.
   • Kortsluiting: If two or more pins' LEDs light up simultaneously or in an incorrect sequence, it indicates a short circuit between those wires.
   • Cross-Wiring/Miswire: If the sequence of lights is incorrect (e.g., pin 1 on main lights up with pin 2 on remote), it indicates a cross-wire or miswire.
   • Shielded Cable Test: The GND light will indicate the status of the shield.

Image 4.1: Illustration of RJ45 test results. A "Connected" state shows all 1-8 lights on, while a "Poor connection" indicates specific lights are off, signifying a fault.

Afbeelding 4.2: Een close-up view of the main tester unit, clearly showing the BNC and RJ45 ports for cable connections.

4.3 Coaxial Cable Testing (BNC/F-Style)

The tester can identify signal issues in coaxial cables with BNC or F-style connectors (using appropriate adapters, not included).

1. Zorg ervoor dat de tester is ingeschakeld.
2. Connect one end of the coaxial cable to the BNC connector on the Hoofdtesteenheid.
3. Connect the other end of the coaxial cable to the BNC connector on the Testapparaat op afstand.
4. Observe the BNC display light.
5. Normale verbinding: The BNC display light will illuminate steadily, indicating continuity.
6. Foutdetectie: If the BNC display light does not illuminate or flashes intermittently, it indicates a fault such as an open circuit or poor connection in the coaxial cable.

Image 4.3: The Treedix tester demonstrating connections for both RJ45 and BNC cables, illustrating its dual testing capability.

4.4 Local and Remote Testing

The tester's split design allows for flexible testing scenarios:

• Local Testing: For shorter cables or when both ends are accessible, the remote unit can be detached and connected to the other end of the cable, or for very short cables, it can remain attached to the main unit.
• Testen op afstand: For installed cables or cables running through walls, the remote unit can be taken to the distant end of the cable while the main unit remains at the starting point. This enables one person to perform comprehensive cable testing.

Image 4.4: The main and remote units of the Treedix tester separated, demonstrating its capability for both local and remote cable testing.

5. Onderhoud

Proper maintenance ensures the longevity and accuracy of your Treedix Network Cable Tester.

• Schoonmaak: Reinig de buitenkant van de tester met een zachte, droge doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
• Opslag: Bewaar de tester op een koele, droge plaats, uit de buurt van direct zonlicht en extreme temperaturen.
• Batterij vervangen: If the power indicator light dims or the tester does not function correctly, replace the 9V battery. Remove the battery if the tester will not be used for an extended period to prevent leakage.
• Behandeling: Avoid dropping the tester or subjecting it to strong impacts, as this can damage internal components.

6. Probleemoplossing

If you encounter issues with your Treedix Network Cable Tester, refer to the following common problems and solutions:

7. Specificaties

8. Garantie-informatie

Treedix products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the product packaging or contact Treedix customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

9. Klantenservice

If you have any questions, require technical assistance, or need to report an issue with your Treedix Network Cable Tester, please contact our customer support team. You can typically find contact information on the Treedix official webwebsite of via de winkel waar u het product hebt gekocht.

Voor aanvullende bronnen en productinformatie kunt u terecht op de Treedix Store op Amazon.