NITECORE P27iX Customizable Variable Beam Pattern Tactical User Guide

NITECORE-LOGO

NITECORE P27iX Customizable Variable Beam Pattern Tactical

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-PRODUCT

Quick Start Guide

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (1)

Tactical Grip 

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (2)

Duty Grip 

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (3)

On / Off 

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (4)

Tactical Momentary Illumination

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (5)

WARNING FLASH 

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (6)

Worldwide Warranty Service 

  • Model number
  • Serial number
  • Date of purchase
  • store Stamp

This is the certificate of authenticity of this item and we confirm that it has been subjected to the most exacting quality controls by SYSMAX Innovations Co., Ltd.

NOTE: Please ensure this warranty card is fully completed by the distributor or retailer after purchasing the product. Should the product fail to operate correctly during the warranty period, it may be returned with the completed warranty card and original sales receipt to the retailer or local distributor for replacement or repair. Customer Service Email: service@nitecore.com

IMPORTANT

  • Thanks for purchasing NITECORE!
  • Please read this manual carefully before using the product and follow the instructions.
  • This manual contains important safety information and operating instructions. Please keep it for future reference.
  • In case of updates, please refer to the latest version available on the official website.

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective/malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty will be nullified if

  1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
  2. The product(s) is/are damaged due to improper use.
  3. The product(s) is/are damaged due to battery leakage.

For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com

Features

  • Utilizes 4 five-core M515S LEDs with a max output of 5,000 lumens
  • Peak beam intensity of 46,320cd and max throw of 430 meters
  • Offers 4 brightness levels, LUMIN SHIELD, STROBE READY™, SEARCH and WARNING FLASH
  • Supports button customization for quick access to special modes and brightness levels
  • Two grip options available: the Duty Grip is designed for everyday use and is primarily operated via the SET Button, while the Tactical Grip is intended for tactical applications and is mainly controlled by the Tail Button and Engage Button.
  • Includes a NITECORE NL2155HPi 21700 Li-ion battery (5,500mAh) and is compatible with CR123/RCR123 batteries
  • A micro-textured orange peel reflector offers long range and wide angle lighting
  • Highly efficient constant current circuit provides a stable output for up to 100 hours
  • Level indicators and battery indicators available for indicating the current brightness level and remaining battery power
  • Designed with dual tail buttons and a side SET button
  • Intelligent Li-ion battery charging circuit with a USB-C charging port, supporting QC/PD fast charging up to 18W
  • Lockout switch (Rapid Lock™) available (Patent No. CN202322748377.2; US Patent No. US12203638B1; EU Patent No. EP4459174A1)
  • Features a high-strength stainless steel strike bezel with silicon nitride ceramic tips, capable of breaking glass quickly
  • Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
  • Constructed from 7075-T6 aero grade aluminum alloy with HA III military grade hard-anodized finish
  • Waterproof and dustproof rating in accordance with IP68 (2 meters submersible)
  • Impact resistant to 2 meters

Specifications

  • Length 143mm (5.63″)
  • Head Diameter 32mm (1.26″)
  • Tube Diameter 26mm (1.02″)
  • Tail Width 33mm (1.30″)
  • Weight
    • 124g / 4.37 oz (Accessories Not Included)
    • 201g / 7.09 oz (Battery Included)

Technical Data

Using a 21700 i Series Li-ion Battery

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (7)

Note:

  1. The stated data is measured by using a 21700 i Series rechargeable Li-ion battery (5,500mAh), in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, at an ambient temperature of 26°C (79°F) from the NITECORE Lab. The data may vary in real world use due to different battery usage or environmental conditions.
  2. When LUMIN SHIELD® / STROBE / SEARCH is activated, the flashlight will automatically adjust the brightness to prevent overheating and prolong the lifespan of the flashlight. To restore the previous brightness, simply reactivate LUMIN SHIELD® / STROBE / SEARCH.
    • The max outputs of LUMIN SHIELD®, SEARCH, and STROBE are only accessible when using NITECORE 21700 i Series batteries with an output over 15A.
    • The data is tested without the temperature regulation.

Using 2 x CR123 Batteries

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (8)

Note

  1. The stated data is measured by using two CR123 batteries (1,600mAh), in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, at an ambient temperature of 26°C (79°F) from the NITECORE Lab. The data may vary in real world use due to different battery usage or environmental conditions.
  2. When LUMIN SHIELD® / STROBE / SEARCH is activated, the flashlight will automatically adjust the brightness to prevent overheating and prolong the lifespan of the flashlight. To restore the previous brightness, simply reactivate LUMIN SHIELD® / STROBE / SEARCH.
  • The data is tested without the temperature regulation.

Accessories
NITECORE NL2155HPi 21700 Rechargeable Li-ion Battery (5,500mAh), NTH27 Tactical Holster, Clip, Spare O-ring, CR123 Battery Magazine, Lanyard Charging Cable

Battery Options
The product is only compatible with NITECORE 21700 i Series batteries with an output over 15A and CR123/RCR123 batteries.

Note

  1. DO NOT attempt to use the product to charge CR123/RCR123 batteries.
  2. The product is NOT compatible with conventional 21700/18650 batteries.
  3. When using CR123/RCR123 batteries, the maximum output is limited to 1,000 lumens.

Battery Installation / Removal

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (9)

Charging Function

NITECORE-P27iX-Customizable-Variable-Beam-Pattern-Tactical-FIG- (10)

Battery Installation / Removal
As illustrated, after unscrewing the battery cap, insert / remove the battery(s) and screw to tighten the tail cap. Please remove the insulation film before first use.

Warning: Ensure the battery(s) is/are inserted with the positive end facing towards the head. The product will not work if the battery(s) is/are incorrectly inserted.

Charging Function
The product is equipped with an intelligent charging system. As illustrated, use the USB cable to connect an external power supply (e.g. an adapter, power bank or other USB charging devices) to the charging port to begin the charging process.

  • The product supports QC/PD fast charging. During the charging process, the green battery indicators will gradually transition from flashing to a steady light to display the battery level.
  • When the battery is fully charged, the product will automatically cease the charging process and the green battery indicators will become steadily turned on to inform the user.
  • The lighting function is available during charging, except for LUMIN SHIELD®, SEARCH, and STROBE.
  • The normal charging time for a 21700 i Series Li-ion battery (5,500mAh) is approx. 3 hours (charged via a 5V/2A adapter); the fast charging time is approx. 2 hours (charged via a PD/QC adapter).

Power Indication
After the light is on, the green battery indicators will display the remaining battery power and automatically go off after 3 seconds. Low Power Indication: When the battery power is below 10%, a green power indicator will flash, while the output may dim or the flashlight may become unresponsive. Please recharge the product or replace the battery as soon as possible. Enable / Disable Indicators: When the light is off, while half pressing and holding the Tail Button, quickly short press the SET Button three times to turn off both the battery indicators and level indicators. To enable the indicators, repeat the same steps.

Status of Indicators /Power Level

  • 4 Constant-on 75% – 100%
  • 3 Constant-on 50% – 75%
  • 2 Constant-on 25% – 50%
  • 1 Constant-on 10% – 25%
  • 1 Flashing <10% (Please recharge the product or replace the battery as soon as possible)

Operating Instructions

The product features multiple functions. Please refer to the appropriate operation guide based on your intended use. The Quick Start Guide covers most general operations. For access to additional features and configurations, please refer to the Detailed Operation Guide.

Quick Start Guide
The following operations are based on factory default settings. If any settings have been changed, you may restore the product to factory defaults before proceeding.

Lockout / Unlock
Lockout (Default Setting): When the light is on / off, slide the Lockout Switch (Rapid Lock™) up to access Lockout Mode. The lock icon can be seen below the Lockout Switch (Rapid Lock™). All buttons are unavailable to activate the flashlight in Lockout Mode.

Unlock: In Lockout Mode, slide down the Lockout Switch (Rapid Lock™) to exit Lockout Mode.

Turn On / Brightness Level Adjusting

  • When the light is off, full press the Tail Button to access TURBO. Half press the Tail Button to switch between MID and TURBO.
  • When the light is off, half press the Tail Button to access MID. Half press the Tail Button again to switch between TURBO and MID.
  • When the light is off, short press the SET Button to access LOW. After turning on the light, short press the SET Button within 3 seconds to cycle through the following sequence: LOW – MID – HIGH – TURBO – Off.

Note: When the light is turned on, the corresponding blue level indicators will light up and automatically go out after 3 seconds of no operation.

Turn Off
When the light is on, full press the Tail Button to turn it off.

Tactical Momentary Illumination

  • When the light is off, half press and hold the Tail Button to access MID. Release to turn it off.
  • When the light is off, full press and hold the Tail Button to access TURBO. Release to turn it off.
  • When the light is off, half press and hold the Engage Button to access LUMIN SHIELD®. Release to turn it off.
  • When the light is off, full press and hold the Engage Button to access STROBE. Release to turn it off.

WARNING FLASH
When the light is off, press and hold the SET Button until the WARNING FLASH isactivated. Short press the SET Button to turn the light off. Beam Pattern Switching (Default Setting: Floodlight)

  • When LOW / MID / HIGH / TURBO is activated by short pressing the SET Button, press and hold the SET Button to cycle through the following sequence: Spotlight – Mixed Light – Floodlight. Release the button to select and memorize the beam pattern. The selected beam pattern will automatically apply to otherbrightness levels and WARNING FLASH. When reactivated, the product will automatically access the previously memorized beam pattern.
  • After turning on the light by half pressing or full pressing the Tail Button, press and hold the SET Button to cycle through the following sequence: Spotlight – Mixed Light – Floodlight. Release to confirm and memorize the beam pattern for the current brightness level. When the brightness level is reactivated, the product will automatically access the previously memorized beam pattern. Eachbrightness level supports independent selection and memorization of a different beam pattern.
Product Activation Beam Pattern Switching Beam Pattern Beam Pattern Memory Function
By short pressing the SET Button  

 

Press and hold

the SET Button

 

 

Spotlight

The selected beam pattern will automatically apply to all brightness levels (LOW, MID, HIGH, and TURBO) and WARNING FLASH.
By half / Mixed TURBO and MID support independent
pressing the Light / selection and memorization of a
Tail Button Floodlight different beam pattern.
By full TURBO and MID support independent
pressing the selection and memorization of a
Tail Button different beam pattern.

Detailed Operation Guide

Duty Grip
The Duty grip supports Basic Mode and Professional Mode, providing access to TURBO, HIGH, MID, LOW and WARNING FLASH. Users can select the desired mode.

Basic Mode (Default Setting)
Please refer to the Quick Start Guide.

Mode Switching

When the light is off, full press and hold the Tail Button. While holding it, quickly press the SET Button three times. The light will flash once (Basic Mode) or twice (Professional Mode) to confirm that the mode has been successfully switched.

Professional Mode

  • On: When the light is off, short press the SET Button to turn it on.
  • Off: When the light is on, long press the SET Button to turn it off.
    • Brightness Level Adjusting: When the light is on, short press the SET Button to
    • cycle through the following sequence: LOW – MID – HIGH – TURBO.
      Note: In Professional Mode, the product features brightness level memory function. When reactivated, it will automatically access the previous memorized brightness level.
  • Beam Pattern Switching (Default Setting: Floodlight): When LOW / MID / HIGH / TURBO is activated by short pressing the SET Button, short press the SET Button, and then immediately press and hold it. The light will cycle through the following sequence: Spotlight – Mixed Light – Floodlight. Release the button to select and memorize the beam pattern. The selected beam pattern will automatically apply to other brightness levels and WARNING FLASH. When reactivated, the product will automatically access the previously memorized brightness level and beam pattern.
  • WARNING FLASH: When the light is off, press and hold the SET Button until the
  • WARNING FLASH is activated. Short-press the SET Button to turn the light off.

Tactical Grip
The tactical grip provides access to TURBO / HIGH, MID / LOW, and LUMIN SHIELD® / STROBE / SEARCH.

  1. For instructions on turning on/off and tactical momentary illumination, please refer to the Quick Start Guide.
  2. Beam Pattern Switching (Default Setting: Floodlight)
    • In the Basic Mode, after turning on the light by half pressing or full pressing the Tail Button, press and hold the SET Button to cycle through the following sequence: Spotlight – Mixed Light – Floodlight. Release to confirm and memorize the beam pattern for the current brightness level. When the brightness level is reactivated, the product will automatically access the previously memorized beam pattern.
    • In the Professional Mode, after turning on the light by half pressing or full pressing the Tail Button, short press the SET Button, and then immediately press and hold it. The light will cycle through the following sequence: Spotlight – Mixed Light – Floodlight. Release to confirm and memorize the beam pattern for the current brightness level. When the brightness level is reactivated, the product will automatically access the previously memorized beam pattern.

Note: When the product is activated by half pressing or full pressing the Tail Button, each brightness level supports independent selection and memorization of a different beam pattern.

Customizable Button Settings
The product features customizable buttons. Both half and full-press-and-hold of the Engage Button can be configured independently to directly access LUMIN SHIELD®, STROBE or SEARCH. Both half press and half-press-and-hold of the Tail Button can be configured to directly access LOW or MID, while full press and full-press-andhold of the Tail Button can be configured to directly access HIGH or TURBO.

Engage Button Half-press-and-hold Configuration: When the light is off, while half pressing and holding the Engage Button, long-press the SET Button to cycle through the following sequence: LUMIN SHIELD® (Default Setting) – STROBE – SEARCH. Once the desirable output is selected, release both buttons. The light will memorize this setting for a half-press-and-hold of the Engage Button.

Engage Button Full-press-and-hold Configuration: When the light is off, while full pressing and holding the Engage Button, long-press the SET Button to cycle through the following sequence: LUMIN SHIELD® – STROBE (Default Setting) – SEARCH. Once the desirable output is selected, release both buttons. The light will memorize this setting for full-press-and-hold of the Engage Button.

Tail Button Half-Press/Half-press-and-hold Configuration: When the light is off, while half pressing and holding the Tail Button, long-press the SET Button to switch between LOW and MID (Default Setting). Once the desirable output is  selected, release both buttons. The light will memorize this setting for both half-press and half-press-and-hold of the Tail Button.

Tail Button Full Press / Full-press-and-hold Configuration: When the light is off, while full pressing and holding the Tail Button, long-press the SET Button to switch between HIGH and TURBO (Default Setting). Once the desirable output is selected, release both buttons. The light will memorize this setting for both full press and full-press-and-hold of the Tail Button.

Reset to Factory Default
While in Lockout Mode, half or full press and hold the Engage Button without releasing it. Then, quickly short-press the SET Button three times or more. The flashlight will flash three times to confirm that the reset has been successfully completed. Unlock the light to use.

ATR (Advanced Temperature Regulation)
The integrated ATR technology regulates the output of the product according to the working conditions and ambient environment to maintain the optimal performance.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

IMPORTANT SAFETY WARNING

  • Thanks for purchasing NITECORE!
  • This manual contains important safety information.
  • Please keep it for future reference.
  • In case of updates, please refer to the latest version available on the official website.

Warning

  1. This product is intended for use by adults aged 18 and over. Please keep this product out of reach of children.
  2. This product may contain small assembly parts. To minimize the risk of choking or suffocation, please ensure it is kept out of reach of children and pets.
  3. CAUTION! Possible dangerous radiation! DO NOT stare directly into the light/laser beam or shine the light directly into the eyes or any reflective surfaces!
  4. The product will generate massive heat during prolonged operation. Please exercise caution during use. It is recommended not to use high brightness levels for extended periods to prevent burns and product damage.
  5. DO NOT cover or place objects near the head of the product, as this may cause damage to the product or accidents due to high temperatures.
  6. DO NOT use the product to illuminate flammable or explosive materials, as the high heat may lead to combustion or explosion.
  7. Please use the product in a standard manner to avoid accidents in the event of product failure.
  8. DO NOT submerge the product into any liquid when it is hot. Doing so may cause irreparable damage to the light due to the difference of air pressure inside and outside.
  9. When the product is placed in an enclosed or flammable environment such as a pocket or backpack, or when it is left unused for an extended period, please turn off the product and take the following measures to avoid accidental activation, dangers caused by excessive heat, or damage from battery leakage: activate the lockout mode, loosen the battery cap, or remove the battery.
  10. DO NOT expose the product to temperatures above 60°C (140°F) for a prolonged time, as this poses a risk of battery explosion or combustion.
  11. Please recharge the product or battery every 6 months when left unused for a prolonged time.
  12. DO NOT disassemble or modify this product as doing so will cause damage to it and render the product warranty invalid. Please refer to the warranty section in the user manual for complete warranty information.

Battery Safety
Improper use of the battery or device with a built-in Li-ion battery may result in severe device/battery damage or safety hazards such as combustion or explosion. DO NOT use damaged device/battery. DO NOT disassemble, puncture, cut, crush, or incinerate the device/battery, or short-circuit the battery. DO NOT use a battery if its discharge current does not match the device. DO NOT mix the batteries of different brands or types. If any leakage, abnormal odor, or deformation is noticed, stop using the device/battery immediately and dispose of it properly. Dispose of the device/battery in accordance with applicable local laws and regulations.

SYSMAX Innovations Co., Ltd.

  • TEL: +86-20-83862000
  • FAX: +86-20-83882723
  • E-mail: info@nitecore.com
  • Web: www.nitecore.com
  • Address: Unit 6355, 5/F, No.1021 Gaopu Road, Tianhe District, Guangzhou, 510653 Guangdong, China

Documents / Resources

PDF thumbnailP27iX Customizable Variable Beam Pattern Tactical
User Guide · P27ix, P27iX Customizable Variable Beam Pattern Tactical, P27iX, Customizable Variable Beam Pattern Tactical, Variable Beam Pattern Tactical, Pattern Tactical

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.