A10 Portable Audio Sound Subwoofer Column Speaker System
“
Product Information
Specifications:
- Model: A10
- Power Requirements: Match voltage and frequency of power
outlet - Controls: Equalizer (Bass, Mid, Treble), Effects, Volume
- Safety Compliance: FCC Part 15
- Minimum Distance for Operation: 20cm between radiator and
body
Product Usage Instructions
Safety Precautions:
Before installation, ensure power outlet matches loudspeaker
requirements. Disconnect from main power before making connections.
Avoid crimping or damaging the power cord. Keep the power cord away
from other cables. Handle the power cord by the plug. Use identical
fuses for replacement.
Back Panel:
The back panel of the device contains various input and output
ports for connectivity.
Functions Explanation:
The white knobs control equalizer settings for CH1-CH4 (Bass,
Mid, Treble). The red knobs control effects for CH1-CH4. The blue
knobs adjust the volume for CH1-CH4.
Caution:
Any unauthorized changes or modifications may void the warranty.
The device complies with FCC regulations regarding interference and
radiation exposure limits.
FAQ:
Q: Can I use the device without following the specified power
requirements?
A: It is recommended to always match the voltage and frequency
of the power outlet to prevent damage to the loudspeaker and ensure
proper functionality.
Q: How should I clean the device?
A: Use a soft, dry cloth to clean the exterior of the device.
Avoid using any liquids or abrasive materials that may damage the
surface.
“`
USER MANUAL A10
1
Safety Precautions
Flying and installation of this speaker cabinet must be carried out by qualified personnel following the approved safety standards. Do not attempt to clean the plastic/wooden enclosure with solvents or petrochemical based cleaners. Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment or smoke machines. Do not expose the speaker cabinet to direct rain or stand in water. Liquid getting into the box will risk a short circuit and will be hazardous. Do not stack the speaker cabinet in a manner that could cause injury should a cabinet become dislodge.
Additional precautions for Auto-amplified devices of the series.
Before installation, ensure that the voltage and frequency of power outlet match the power requirements of the loudspeaker. Disconnect from main power before to make connections in the loudspeaker. Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the powercord come into contact with other cables. Only handle the power-cord by the plug. In case to replace the fuse, it must be changed by identical rate and dimensions.
Attention
Before connecting or operating your new loudspeaker, please study the accompanying instruction manual paying special attention to the operating precautions and wiring procedure.
2
Back Panel
3
Functions Explanation
1-4: CH1-CH4 White knob: CH1 – 4 Equalizer controls (Bass, Mid, and Treble) Red knob: CH1 – 4 Effects controls Blue knob: CH1 – 4 Volume controls
5. CH5/6/BT Equalizer controls (Bass, Mid, and Treble) 6. Effects selector and display 7. Master Volume control 8. Wireless Streaming/Wireless Linking Status LED/Output Level LED indicators/Power LED indicator 9. Sub Level control 10. CH7/8/AUX Volume control CH1 – CH4 MIC/GUITAR/LINE input section: 11/12/13/14: MIC/GUITAR/LINE selector switch: When connecting a microphone or guitar, make sure that the corresponding channel’s button is in the “down” position. When connecting a line level device, make sure that the specific button is in the “up” position. 15/16/17/18: Combo XLR input 19/24: CH 5/6¼”TRS inputs 20/23: CH 7 /8 RCA inputs 21: 3.5mm AUX in 22: Mix output 25: Voltage selector switch 26: AC input : connect IEC power cable here to supply power to the unit 27: Power Switch : it allows to switch on / off the unit
4
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Documents / Resources
 | NINGBO A10 Portable Audio Sound Subwoofer Column Speaker System [pdf] User Manual 2AX6P-A10, 2AX6PA10, a10, A10 Portable Audio Sound Subwoofer Column Speaker System, A10, Portable Audio Sound Subwoofer Column Speaker System, Audio Sound Subwoofer Column Speaker System, Sound Subwoofer Column Speaker System, Subwoofer Column Speaker System, Column Speaker System, Speaker System, System |