niko - logo

Manual
551-722×1

niko Connected Dimmer 3 200W 2 Wire - cover

Connected dimmer, 3 – 200 W, 2-wire

Dimensions

niko Connected Dimmer 3 200W 2 Wire - Dimensions 1

niko Connected Dimmer 3 200W 2 Wire - Dimensions 2

niko Connected Dimmer 3 200W 2 Wire - Dimensions 3

Wiring

230 V – OFF

niko Connected Dimmer 3 200W 2 Wire - Wiring

This product must be secured with a Miniature Circuit Breaker (MCB) of max. 16 A in the electrical cabinet.
* All mechanical push-button extensions wired to the same terminal will show the same behaviour (either the standard behaviour of the actor or a programmed behaviour). It is not possible to configure the behaviour of these extension switches separately. Max. wire length for all extension buttons: 50 m. (Note that this is the total wire length for all extension switches connected to the Easywave switch)

Installation

niko Connected Dimmer 3 200W 2 Wire - Installation 1

niko Connected Dimmer 3 200W 2 Wire - Installation 2

niko Connected Dimmer 3 200W 2 Wire - Installation 3

niko Connected Dimmer 3 200W 2 Wire - Installation 4

Settings

In an installation without a wireless smart hub, the dimmer will control the wired lamp. More advanced options become available if you use a wireless smart hub and the Niko Home Contol programming software.

Select dimmer profile 

niko Connected Dimmer 3 200W 2 Wire - Settings

niko Connected Dimmer 3 200W 2 Wire - Settings 2

Memory function

Stand-alone mode: The memory function is always active with the previously set light intensity level being stored. It cannot be disabled.
Connected mode: The memory function is active by default and it can be disabled via the Niko Home Control II configuration software.

Reset

niko Connected Dimmer 3 200W 2 Wire - Reset

Load table

Below table gives an overview of the permitted loads at an ambient temperature of 35 °C

Lamp LED
Resistive 230 V halogen
lamp
12 V halogen
lamp
dimmable
LED lamp
Max. 200 W 200 W 200 VA 200 W
Min. 3 W 20 W 20 W 3 W

The dimmable capacity decreases by 10 % per 5 °C once the ambient temperature of 35 °C is exceeded

niko Connected Dimmer 3 200W 2 Wire - Load table

Control

Download the Niko Home Control programming software

Niko Home Control
programming
software

www.niko.eu/article/550-99102 (Windows)
www.niko.eu/article/550-99202 (Mac)

Control your dimmer with the Niko Home Control II app

niko Connected Dimmer 3 200W 2 Wire - Control

Specifications

Article number  552-722×1
Power supply  230 Vac
Protocol Easywave Sharp
Mounting method wall mounting
Flush-mounting box specifications  Depth = min. 40 mm Claw/screw fixing = 60 mm
Inner diameter box = 60 mm
Mounting height  100 – 140 cm
Weight 70 g
Ambient temperature  0 – 40 °C
Dimensions (HxWxD) (551-72201, 551-72221) 71,5 x 73 x 40 mm
Dimensions (HxWxD) (551-72211) 73 x 73 x 40  mm
Protection degree  IP20
Modification of settings Niko Home Control programming software  (requires smart hub 552-00001)
Maximum range (from switch to smart hub)  30 m
Operating frequency  869,05 Mhz
Maximum frequency power  6 dBm
Wire capacity  2 x 2,5 mm²
Marking CE

Warnings regarding installation
The installation of products that will permanently be part of the electrical installation and which include dangerous voltages, should be carried out by a qualified installer and in accordance with the applicable regulations. This user manual must be presented to the user. It should be included in the electrical installation file and it should be passed on to any new owners. Additional copies are available on the Niko website or via Niko customer services.

CE marking
This product complies with all of the relevant European guidelines and regulations. For radio equipment Niko llc declares that the radio equipment in this manual conforms with the 2014/53/EU directive. The full text of the EU declaration of conformity is available at www.niko.eu under the product reference, if applicable.

Environment
This product and/or the batteries provided cannot be disposed of in non-recyclable waste. Take your discarded product to a recognised collection point. Just like producers and importers, you too play an important role in the promotion of sorting, recycling and reuse of discarded electrical and electronic equipment. To finance the rubbish collection and waste treatment, the government levies recycling charges in certain cases (included in the price of this product).

Support & contact

nv Niko sa
Industriepark West 40 9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80
[email protected]

Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up-to-date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at [email protected].

PM551-722x1R21442

Documents / Resources

niko Connected Dimmer, 3-200W,2-Wire [pdf] User Guide
Connected Dimmer, 3-200W, 2-Wire, Dimmer

References

Leave a comment

Your email address will not be published. Required fields are marked *