NIKO-LOGOniko 101-91004-40 Dimmer Switch

niko-101-91004-40-Dimmer-Switch

Niko dimmer switch for Hue system

Installation

niko-101-91004-40-Dimmer-Switch-1 OPTION1niko-101-91004-40-Dimmer-Switch-2niko-101-91004-40-Dimmer-Switch-3OPTION2niko-101-91004-40-Dimmer-Switch-4
niko-101-91004-40-Dimmer-Switch-5niko-101-91004-40-Dimmer-Switch-6

Dismantling

  • niko-101-91004-40-Dimmer-Switch-7
  • niko-101-91004-40-Dimmer-Switch-8

Configuration

niko-101-91004-40-Dimmer-Switch-9

Specifications

  • Article number: 101-91004-40
  • Power consumption: none (battery-free)
  • Power supply: integrated kinetic energy harvester
  • Number of configurable switches: 4
  • RF protocol: Zigbee® (Green Power)
  • Modulation / Data rate: Direct-Sequence Spread Spectrum (DSSS) with
  • Mounting methoD: wall mounting
  • Mounting height: 110 – 120 cm
  • Weight: 39 g
  • Temperature (storage / operating): -25 – +65 °C*
  • Dimensions (HxWxD): 63.5 x 63 x 16 mm
  • Protection degree: IP20
  • Configuration: Philips Hue app
  • Maximum range (indoor): 20M
  • Humidity: 0 – 95 % relative humidity, non-condensing
  • Operating frequency: 2.4 GHz (2404 MHz to 2481 MHz)
  • Maximum RF power: 7 dBm / 5 mW
  • Antenna: integrated antenna
  • Marking: CE, WEEE

The maximum temperature difference between the Niko dimmer switch and a receiver should not exceed 40 °C

Troubleshooting

niko-101-91004-40-Dimmer-Switch-11

Support & contact

Documents / Resources

niko 101-91004-40 Dimmer Switch [pdf] Instruction Manual
101-91004-40, Dimmer Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *