TUTCO Electric Duct Heater Installation Manual - Download [optimized] TUTCO Electric Duct Heater Installation Manual - Download
Read and save these instructions. Manual v1.2
2
Trust should be earned and we will earn yours. Customer happiness is the focus of our business.
From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most.
As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
For questions regarding your product, please contact us at:
Call: 1-855-963-9247
Email: support@newair.com
Online: www.newair.com
3
Register Your Product Online …….. 4
Safety Information & Warnings ……. 5
Parts of the Heater …………….. 7
Grounding & Operating …………… 7
Cleaning & Storage ……………… 8
Specifications …………………. 9
Troubleshooting ……………….. 10
Limited Manufacturer’s Warranty …. 11
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS HEATER
Note: There may be a trace of smoke or odor when this unit is first operated. Don’t be alarmed. This indicates that a drop of oil fell on the heating coil during the manufacturing process. It will quickly evaporate and should not reoccur.
Make sure that the room in which the appliance is located is well ventilated during its operation. It is normal for the appliance to emit small cracking sounds when you turn it on for the first time. Do not be alarmed.
CAUTION: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4
Take advantage of all the benefits product registration has to offer:
Diagnose troubleshooting and service issues faster and more accurately
Stay up to date for safety, system updates and recall notifications
Opt-in for NewAir promotions and offers
Registering your product information online is safe & secure and takes less than 2 minutes to complete:
Alternatively, we recommend you attach a copy of your sales receipt below and record the following information, located on the manufacturer’s nameplate on the rear of the unit. You will need this information if it becomes necessary to contact the manufacturer for service inquiries.
Date of Purchase: _____________________________
Serial Number: _____________________________
Model Number: _____________________________
5
6
7
IMPORTANT!
This heater must be installed on the floor only.
Prior to operating the heater, ensure the electrical receptacle is of the configuration and capacity appropriate for the heater. This heater uses 240 volts. The cord has a plug as shown below. No adapter is available for this blade configuration, and none should be used. The type of receptacle is a 250 volt rounding receptacle (NEMA 6-30R). When properly installed, it provides a ground connection through the cord to the heater to protect the operator from electric shock.
Receptacle: NEMA #6-30R 250V 30 Amps
Plug: NEMA #6-30P 250V 30 Amps
8
Your heater is equipped with a thermostat. The thermostat function controls the temperature output.
The unit’s fan has two settings:
ON – operates the fan continuously.
AUTO cycles fan on and off as needed to maintain ambient temperature.
9
3. To clean housing, use a clean, soft and lightly damp cloth to gently wipe all the dirt from the surface of the unit. Be sure not to wet the heating element and the switches. Allow the unit to dry completely before using it.
Caution: Do not allow water to run into the interior of the heater as this could create a fire or electric shock hazard, damaging the unit.
MODEL NO. G56
VOLTAGE: 240 volts
CURRENT: 23.4 A
FREQUENCY: 60Hz
POWER CONSUMPTION: 5600W
10
Problem | Possible Causes | Solution |
Unit is not heating. | Overheat protection has temporarily deactivated the heater. | Turn the heater off; unplug it and allow it to cool. Inspect and remove any objects on or adjacent to the heater. Wait 30 minutes before plugging unit back in. |
Room temperature has been warmed up to thermostat setting. | To increase the room temperature, adjust thermostat control knob to a higher setting by turning clockwise. | |
Heater is not plugged into a 250V grounded outlet/receptacle. | Ensure unit is in the OFF position. Plug in unit and attempt to turn on again. | |
Breaker/Fuse has been tripped. | Check your electrical box to confirm the breaker has not been blow. This may occur if the receptacle is shared between other high consumption appliances. | |
The heater is producing a burning smell. | A drop of oil fell on the heating coil during the manufacturing process. | It will quickly evaporate and should not occur again. Ensure room in which heater is situated is well ventilated. |
Check and ensure there are no combustible materials within 3 feet (0.9 meters) surrounding the heater. | Remove any combustible items from the heater. | |
Ensure a minimum clearance of 5.5 inches (14 cm) from both sides and rear of heater to adjacent walls. | Reposition the heater so there is enough space around the heater to the adjacent walls. |
Please do not attempt to open or repair the heater yourself. Doing so could cause damage or personal injury.
11
This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
During the first year, any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced, at the manufacturer’s discretion, at no charge to the original purchaser. The purchaser will be responsible for any removal or transportation costs.
The warranty will not apply if damage is caused by any of the following:
When making a warranty claim, please have the original bill of purchase with purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs. Replacement parts and/or units will be new, re-manufactured or refurbished and is subject to the manufacturer’s discretion. For technical support and warranty service, please email support@newairusa.com.
newair Electric Garage Heater [pdf] Owner's Manual Electric Garage Heater, G56 Electric Heater |
T5 Universal Ended Bypass For model #: 9.5T5HE/2F/xxx/BYP, 12T5HE/3F/xxx/BYP, 14.5T5HE/4F/xxx/BYP, 11.5T5HO/2F/xxx/BYP, 14.5T5HO/3F/xxx/BYP, 25T5HO/4F/xxx/BYP9.5T5HE/2F/xxx/BYP/R, 12T5HE/3F/xxx/BYP/R, 14.5T5HE/4F/xxx/BYP/R,…
VN1061-MA-4G Smart Naviceiver V1.T3ALULAIDTEION SG IN VN1061-MA-4G SMART NAVICEIVER MOBILE INTERNET READY VISION ANDROIDTM SERIES…
EE212D Modular Humidity and Temperature Sensor PICS EE212D BACnet Protocol Implementation Conformance Statement PICS_EE212D //…
Beoplay H4 2nd Generation Over-Ear Headphones Beoplay H4 2nd Gen Quick Start Guide Lynguide Kurzanleitung…
58696 SolarFlow Outdoor Shower EN FR DE IT NL ES DA PT EL RU CS…