NetVIP WiFi Repeater Extender 519 User Manual

24h Tech Support:

awanka@163.com

2 Working Modes;

(Select based on your needs)

1. Repeater Mode
   Plug NETVIP WiFi Booster into your power socket, easily expand your existing WiFi coverage to signal dead zones
2. Access Point Mode
   Connect your router signal with Ethernet Cable, cover a wired network to a wireless access point.

How to set Repeater Mode

• Step 1：Plug the item into power socket directly. Turn off your cell data, connect the repeater signal.
   
• Step 2; Open your browser and go to the web; 192.168.10.1
  
• Step 3；User name and password are both admin
  
  Step 3; Choose Repeater Mode.
  
• Step 4; Select your current Wifi
  
• Step 5; finish the setting
  
• Step 6; Done, close your browser directly
  

Reference Video

https://youtu.be/3uoGpCGITWk
https://youtu.be/bGedIZMJSKE

FQ

Why unable to open the IP address 192.168.188.1?

1. Before go to the web site, please connect the Repeater signal FIRST. (NOT your home wifi, a new signal in your WLAN list)
2. Please do not use the network cable before completing the setting.

Documents / Resources

NetVIP WiFi Repeater Extender 519 [pdf] User Manual WiFi, Repeater, Extender, 519, awanka

References

• User Manual