NETGEAR RS100 Nighthawk Dual Band WiFi 7 Router
USER GUIDE
1. On your mobile phone, scan the QR code to download the Nighthawk app and follow the setup instructions
If you used the Nighthawk app before, go to the dashboard and tap the top left menu, then SET UP A NEW NIGHTHAWK SYSTEM.
2. Check your network security with NETGEAR ArmorTM NETGEAR Armor protects your family’s WiFi with an automatic shield of security across your connected devices.
Tap the SECURITY tile in your Nighthawk app to explore your complimentary Armor trial and protection score.
3. Do more with the app
Check out everything you can do on the Nighthawk app! Run a speed test, pause the Internet, see all the connected devices, and more.
CONTENTS
*Varies by region. Packages in some regions might also include plug adapters.
OVERVIEW
NEED HELP?
If you’re having problems with the installation, you can try these tips:
– Turn off your modem and router and disconnect them. Reboot your modem. Reconnect your router to your modem and try installing with the Nighthawk app again.
– If you’re still unable to install your router using the Nighthawk app, install it using the router web interface. Visit routerlogin.net to access the router web interface.
You can also find more setup help online at netgear.com/routerhelp.
SUPPORT AND COMMUNITY
Get your questions answered and access the latest downloads at netgear.com/support, and check out our NETGEAR Community at
community.netgear.com.
REGULATORY AND LEGAL
For regulatory compliance information including the EU Declaration of Conformity,
visit netgear.com/about/regulatory. See the regulatory compliance document
before connecting the power supply. For NETGEAR’s Privacy Policy, visit
netgear.com/about/privacy-policy.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.
Specifications
- Router Model: Nighthawk
- Network Security: NETGEAR ArmorTM
- Ports: Gigabit LAN ports, 2.5G Internet port
- Power: Power LED, Power adapter
- Connectivity: Ethernet cable
© NETGEAR, Inc.,
NETGEAR, the NETGEAR Logo and the Nighthawk logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 6, Penrose Two, Penrose Dock,
Cork, T23 YY09, Ireland
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter installation issues?
If you face installation problems, try the following steps:
- Turn off modem and router, then reboot modem before reconnecting router.
- If app installation fails, access router web interface at routerlogin.net.
Q: Where can I find additional setup assistance?
For more setup help, visit netgear.com/routerhelp or reach out
to NETGEAR support at netgear.com/support.
Documents / Resources
 | NETGEAR RS100 Nighthawk Dual Band WiFi 7 Router [pdf] User Guide RS100, RS90, RS80, RS70, BE3600, RS100 Nighthawk Dual Band WiFi 7 Router, RS100, Nighthawk Dual Band WiFi 7 Router, Dual Band WiFi 7 Router, Band WiFi 7 Router, Router |
