COOL115xx Air Cooler

Nedis COOL115xx Air Cooler

User Manual

Preface

 Thank you for purchasing the Nedis COOL115xx.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.

Product description

Intended use
The Nedis COOL115xx is an air cooler with a 3 L water tank capacity.
The product is exclusively intended as an air cooler.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
Air Cooler
Article number
COOL115xx
Dimensions (l x w x h)
280 x 250 x 560 mm
Weight
4.2 kg
Power input
220 – 240 VAC 50 – 60 Hz
Rated power
80 W
Water tank capacity
3 L
Air volume
270 m3/h
Automatic air swing
Yes
Timer
0.5 h – 7.5 h shut-off
Remote control
Yes
Information requirements for comfort fans
Description
Symbol
Value
Unit
Maximum fan flow rate
F
5.3
m³/min
Fan power input
P
80
W
Service value
SV
0.07
(m³/min)/W
Standby power consumption
PSB
/
W
Fan sound power level
LWA
65
dB(A)
Maximum air velocity
C
8
m/s
Seasonal electricity consumption
Q
26.149
kWh/a
Measurement standard for service value
IEC 60879:1986 (corr. 1992) Performance and construction of electric circulating fans and regulators
Main parts (image A)
A (19615 1422)_v2
A
1. Cover
2. Ice pack
3. Water tank
4. Air filter
5. Curtain paper
6. Air filter slot
7. Air cooler
8. Water tank lock
9. Water tank slot
10. Water hose
11. Power cable
12. Vertical air flow control
13. Air outlet
14. Remote
15. Air flow on / off
16. Wind
17. Fan speed
18. Swing on / off
19. Cooler on / off
20. Timer
21. Cooler on / off
22. Swing on / off
23. Timer
24. Display
25. Wind
26. Fan speed
27. Air flow on / off

Safety instructions

 WARNING
  • Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
  • Only use the product as described in this document.
  • Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
  • Do not drop the product and avoid bumping.
  • This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
  • Do not expose the product to water or moisture.
  • Disconnect the product from the power outlet and other equipment if problems occur.
  • Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not allow children to play with it or touch it.
  • Do not use the product in rooms where flammable liquids or gases are used or stored.
  • Do not use the product in wet or damp environments.
  • Avoid direct sunlight.
  • Do not cover the product.
  • Do not use the product without water in the tank.
  • Do not use solvents to clean the product.
  • Only plug the cable into a wall outlet. Do not use extension cords.
  • Only use a power outlet rated 10 A or higher.
  • Do not insert any objects into the product.

Installation

  • Check the contents of the package
  • Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Setup
1. Place the product on a stable and flat surface.
2. Plug the power cable A11 into the power outlet.
Filling the water tank
1. Pull out the water tank A3.
2. Lift the cover A1.
3. Fill A3 with water.
  • Do not fill the water tank above the “max” indicator.
  • Do not use the product if the water level is below the “min” indicator.
4. Place A1 back on A3.
5. Insert A3 back into the water tank slot A9.
Using ice packs
  • The use of ice packs A2 is optional.
  • Use A2 if water does not provide enough cooling.
1. Place A2 in the freezer until frozen.
2. Turn the water tank lock A8 to unlock A3.
3. Pull out A3.
4. Lift A1.
5. Place A2 in A3.
6. Make sure the water level is between “min” and “max”.
7. Place A1 back on A3.
8. Place the water hose A10 into A3.
9. Insert A3 back into A9.
10. Turn A8 to lock A3.

Use

Using the fan
1. Press A27 to switch on the fan.
2.Press A26 to set the fan speed.
  • A24 indicates the current fan speed.
3. Press A27 to switch off the fan.
Using the cooling function
  • Press A21 to activate or deactivate the cooling function.
Setting air flow direction
1. Press A22 to automatically swing the air flow from left to right.
2. Use A12 to set the vertical air flow direction.
Setting the wind type
  • Press A25 to set the wind type.
  • A24 indicates the current wind type
Using the timer
  • Press A23 to set the time to stand-by.
  • You can set the time to standby in 0.5 hr intervals from 0.5 – 7.5 hr.
  • A24 indicates the time left to stand-by.
Using the remote
1. Press A15 to switch the air flow on or off.
2. Press A16 to set the wind type.
3. Press A17 to set the fan speed.
4. Press A18 to automatically swing the wind direction from left to right.
5. Press A19 to switch the cooling on or off.
6. Press A20 to set the time to stand-by.

Maintenance

  •  Disconnect from the power outlet.
  • Cleaning the air filter
1. Remove the air filter from the air filter slot .
2. Remove the curtain paper from .
3. Clean and with tap water and a soft brush.
4. Insert back into .
5. Insert back into .
Cleaning the water tank
1. Turn to unlock .
2. Pull out .
3. Clean with soap and a soft brush.
4. Place back .
5. Turn to lock .
Cleaning the housing
  • Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
  • Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
  • Do not open the product.

Warranty

 Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

 Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

WEEE
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

Leave a comment

Your email address will not be published.