nanoleaf-logo

nanoleaf 374NL599PK Smarter Kit

nanoleaf-374NL599PK-Smarter-Kit-product-imagenanoleaf-374NL599PK-Smarter-Kit-01

Detailed Tutorials & Warranty go.nanoleaf.me/mylines

What’s in the Box

nanoleaf-374NL599PK-Smarter-Kit-02

Overview

nanoleaf-374NL599PK-Smarter-Kit-03

nanoleaf-374NL599PK-Smarter-Kit-11Design Inspiration
go.nanoleaf.me/inspiration

Important Installation Tips

nanoleaf-374NL599PK-Smarter-Kit-4

Cleon your surface of dust. moisture and oil. Tape 1s NOT recommended for textured, porous. and ceiling surfaces (i.e.. wallpaper or brick walls) For ceiling installations, or to learn how to use the screw mount option to go.nonoleof.me/mylines

  • Before mounting, lay your design out on a table and power ON to ensure everything 1s working.nanoleaf-374NL599PK-Smarter-Kit-05
  • To secure your layout, press and push each of the mounting connections against the wall for 30 seconds.

nanoleaf-374NL599PK-Smarter-Kit-06

When mounting, grab a friend to h· lp1 For the best result, mount your layout all at once Or for larger layouts, mount 1n closed-loop sections (wangles, hexagons, etc.)

nanoleaf-374NL599PK-Smarter-Kit-07nanoleaf-374NL599PK-Smarter-Kit-08nanoleaf-374NL599PK-Smarter-Kit-09

Dismounting Your Lines

nanoleaf-374NL599PK-Smarter-Kit-10

WARNINGS & CAUTIONS
Please read this safety information carefully and keep this document for future reference. Help articles and customer support is always available at https://go.nanoleof.me/support. This Nanoleaf product is not designed, certified, nor intended tor use in: enclosed locations that limit the flow of air and/ or trap heat. Product is intended for environment temperature of 0-40 degrees Celsius and< 95% RH; emergency exits, emergency lighting, or other use cases involving critical systems for human safety; in conjunction with 3rd party devices that ore not approved by Nanoleaf for use with Nanoleaf products: locations or use cases where there is o risk of electric shock: outdoor areas, regardless of weather conditions; wet or damp conditions; excessively hot environments that are consistently above 40 degrees Celsius for extended periods of time (for example: near ovens. space heaters. clothing dryers); excessively humid areas; regions or countries other than that in which the product was intended for and certified for sale in. When using this Nonoleaf product: Do not open or disassemble the device, as this will void the warranty and make the product unsafe for use. While connected to the electrical supply of the building, line voltages will be present in the power supply, panels, linkers, so do not place any metallic or conductive objects near any exposed metal contacts on any component. Unplug the power supply unit from the power source before dismounting the product. Do not allow small children to operate this device without adult supervision This device contains small parts that may be o choking hazard to small children. Loose or dangling cords may cause on entanglement hazard to small children. Do not leave cords dangling or loose on the floor to help prevent accidents from tripping. Do not clean the device with liquid or sprays when it is connected to power. Cleon the panels with a soft dry cloth, and do not use harsh cleaning agents. Do not step on any port of the device, as this will cause breakage. Do not submerge any port of the device in water, or expose any part of the device to water. Do not attach the product together with any connector or device other than original equipment manufactured by Nanoleaf11). Do not puncture any port of the device with sharp objects, as this will cause the device to cease working as designed and may present a safety hazard. If adhesive tape is a component of this product, please note that it is not designed to be used with unpainted brick wall, wallpaper, uneven/textured surfaces, or highly porous surfaces If applicable, do not use double-sided tape to attach any part of the device to o ceiling or surface greater than 90 degrees relative to the floor, as the device will eventually fall down-creating a safety hazard and risk of damage to the device. Optional secure mounting solutions for these use cases ore available, sometimes through added accessories offered for purchase separately. Your warranty DOES NOT COVER damage caused by falling devices. The flexible coble and power supply cannot be replaced by another third party product. If the coble is damaged, the entire controller and power supply should only be replaced with original equipment manufactured by Nonoleat1. Using any non-approved replacement component will void the warranty and may present a serious safety hazard. This Nanoleaf product is primarily intended for decorative use, with RGBW output function that can dim.

WI-FI/RF
This equipment has been tested and found to comply with the limits of Closes B digital device, pursuant to port 15 of the FCC Rules and the Canadian ICES-003 Closes 8 specifications. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user 1s encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna;
  • Increase the separation between  the equipment and receiver.
  • Connect the equipment into on outlet on o circuit different from that to which the receiver is connected.
  • Consult the dealer or on experienced radio/TV technician or visit https://go.nonoleaf.me/support.

FREQUENCY RANGE

  • 2.4GHz Wi Fi 2412-2462 MHz, Mox RF e.i.r.p power< 20 dBm
  • 2.4GHz Radio2402-2480 MHz. Mox RF e.i.r.p power<lO dBm
  • NFC: 13.56MHz, Mox RF e.i.r.p power 0 dBm

WARRANTY INFORMATION This product is covered by o limited warranty from Nanoleof: a two-year complimentary replacement of defective hardware. For full details visit: https://go.nanoleof.me/warranty.

DISPOSAL OF YOUR OLD PRODUCT
Your product is designed and manufactured with high quality materials and components, which con be recycled and reused. When this crossed ·out wheelie b1r, symbol is attached to a product, rt means that the product 1s covered by European Directive 2012/19/EU. Please find out about your local collection system tor electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help to prevent potential negative consequences for the environment and human health.

 

nanoleaf-374NL599PK-Smarter-Kit-11Still Need Help?
go.nanoleaf.me/support

Models: NL59-K-0003LW·9PK
NLS9-K-0003LW-9PK·AMZ
Rating Input: 120V AC 60Hz

Models;

  • NLS9-K-0OOSLW-9PK
  • NLS9·K·0007LW-9PK
  • NLS9-K-0016LW  9PK
  • NLS9-K-0017L W-9PK
  • NLS9·K·0002LW-9PK
  • UK NLS9-K·6002LW-15PK-UK
  • Roting lnput: 100-240V-, 50/60Hz

 

Nonoleaf Canada
#400 – 100 Front Street East Toronto, ON
MSA 1El Canada

  • Rated Power: 25W (9PK); 40W (lSPK)
  • PSU Max Power: 48W
  • Color Temperature: 5700K·6300K•RGB FCC ID; 2AfWY-NLS9
  • IC: 20489-NL59

Nanoleaf Europe SAS
11 Rue de Lourmel 75015 Pons
Fronce

Nanoleaf Europe SAS
P/A 4 Ees Ltd, Boy House, Cocks Hill, Perronzobuloe, Cornwall TR6 OAT, Unrted Kingdom

Manufacturer
NonoGr,d Limited
#l301-483A Castle Peak Rood, Kowloon, Hong Kong

nanoleaf-374NL599PK-Smarter-Kit-13nanoleaf-374NL599PK-Smarter-Kit-12

Documents / Resources

nanoleaf 374NL599PK Smarter Kit [pdf] User Guide
374NL599PK Smarter Kit, 374NL599PK, Smarter Kit