Instruction Manual for USX-MOUNT models including: XFL009, XFL009 Fixed TV Wall Mount, Fixed TV Wall Mount, TV Wall Mount, Wall Mount, Mount
USX MOUNT Fixed TV Wall Mount, Low Profile TV Mount for Most 37-86 Inch Flat Screen TVs, Max VESA 600x400mm Wall Mount TV Bracket Holds up to 132 lbs, Fits 16"/18"/24" Wood Studs, Quick Release Lock : Electronics
User Manual (PDF) USX MOUNT X-MOUNT LIMITED USX,MOUNT,TV,Wall,Mount,Low,Profile,TV,Mount,for,Most,42-86,Inch,Flat,Screen,Televisions,Max,VESA,600x400mm,Fixed,Wall,Mount,Bracket,Holds,up,to,132,lbs,Fits,16"/18"/24",Studs,Large,42-86",B0DSL9DZ5N,B0CZ31GP32,B095CDL8P9,B07PN93RJN,B0CNSNJFMQ,B07PQJRTD6,B0D7CMWW1N,B0DC641LGB,B0BR57SF9V
File Info : application/pdf, 16 Pages, 1.60MB
DocumentDocumentR XFL009 INSTRUCTION MANUAL For 37-86" TV If you have any questions along the way, just message to us. We're ready to help! AUUS-C1 ! CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS Before getting started, let's check below lists to make sure it is just right for you! 1 MAX:600mm/23.6" (MIN:150mm/5.9") Check your TV VESA is within Min and Max size MAX:400mm/15.7" (MIN:150mm/5.9") No? This mount is NOT compatible. Yes? Perfect ! 2 Does your TV (including accessories) weigh MORE than 132 lbs. (60 kg)? 3 What is your wall made of? Max: 132 LBS (60 kg) No? Perfect you may continue. Yes? This mount is NOT compatible. Per fect ! Drywall with wood studs? ! CAUTION: DO NOT install into drywall alone Per fect ! ! CAUTION: DO NOT exceed the maximum weight indicated. This mounting system is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in collapse of the mount and its accessories, causing possible injury. Solid concrete ? Unsure? Mail to us via Amazon. Wood Stud Install Concrete Install Do you have all the tools needed? (Not included) Caution 4 Tape Measure Pencil Screw driver Electric Drill Socket Wrench 1/2"(13mm) Stud Finder 7/32"(5.5mm) Awl Wood Drill Bit 3/8"(10mm) Masonry Drill Bit Hammer 5 This product is designed for use in wood stud, solid concrete walls - DO NOT install into drywall alone The wall must be capable of supporting five times the weight of the TV and mount itself Do not use this product for any purpose not explicitly specified by manufacturer Manufacturer is not responsible for damage or injury caused by incorrect assembly or use 2 Product dimensions TV INTERFACE MAX:600mm/23.6" MIN:150mm/5.9" MAX:400mm/15.7" MIN:150mm/5.9" SIDE VIEW 28mm/1.10" WALL PLATE 420mm/16.54" 609.6mm/24" 508mm/20" 406.4mm/16" 304.8mm/12" 203.2mm/8" 638.6mm/25.14" 222mm/8.74" 3 Parts and Hardware ! WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. Parts and Hardware for STEP 1 TV Brackets TV Screws M4x12mm M4x30mm Spacers M8x22mm 10mm a x4 M6x12mm d x4 M6x35mm g x4 2.5mm h x4 M6x17mm 06 x2 b x4 M8x25mm e x4 M8x45mm i x8 j x4 Washers M4 M6 c x4 f x4 k x4 l x4 4 Parts and Hardware for STEP 2 Wall plate(Left) Wall plate(Right) 04 x1 05 x1 R 609.6mm(24") 203.2mm(8") 406.4mm(16") V0 Mounting template Level Lag Bolt M8x60mm M5x8mm Bolt 01 x4 Allen Key 02 x4 03 x1 Concrete wall anchor (NOT INCLUDED) Concrete Wall Anchor Ø10x50mm 4pcs Contact us and message to us to have these additional pieces shipped directly to you. 5 STEP 1 Attach Brackets to TV 1-1 Select TV Screws M4 M6 M8 6 1-2 Figure out the suitable position of brackets LOW MOUNTING HOLES HIGH MOUNTING HOLES INSTALL UP/DOWN IF NEEDED ! TV BRACKETS MUST BE LEVEL ! 7 1-3 Need Spacer? No, choose suitable screws and washers. abc kl 1-4 Attach the TV Plate No! Yes, choose suitable screws, washers and spacers. 06 de f kl gh i j Tips: If you need to combine M6/M8(c/e/f) screws with 2.5mm spacers( i ), you have to remove the inner circle. 8 Assemble Wall plate 03 02 04 05 07 Wall plate unit 9 STEP 2A Attach Wall Plate to Wall Wood Stud Option ! CAUTION: Avoid potential personal injury or property damage! Drywall covering the wall, must not exceed 5/8 in. (16 mm) Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) Maximum horizontal space between fasteners: 24 in. (609.6 mm) Stud center must be verified 1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using a thin nail, or an edge to edge stud finder. 2. Position the wall plate unit at your desired height and line up the holes with your stud center line. Level the wall plate and mark the hole locations. 1 Wall Again, find another wood stud 2 Wall Centre line 16"/24" Level Mounting template 10 3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. ! IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center of the studs. 4. Install wall plate 07 using lag bolts 01 . Tighten the lag bolts only until they are pulled firmly against the wall plate. ! CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts. Go to STEP 3 on PAGE 14. 3 2.5"(64mm) 4 No! Wall Wall 7/32" (5.5mm) Level 01 07 11 STEP 2B Attach Wall Plate to Solid Concrete Wall ! CAUTION: Avoid potential personal injury or property damage! Mount the wall plate assembly unit directly onto the concrete surface Minimum solid concrete thickness: 8 in. (203 mm) 1. Position the wall plate unit on the wall at your desired height. Level the wall plate and mark the hole locations. 2. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit. ! IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). 1 2 Wall Level Wall 3/8" (10mm) 2.5"(64mm) Mounting template 12 3. Insert anchors. ! CAUTION: Be sure the anchors are seated flush with the concrete surface. 4. Insert wall plate 07 using lag bolts 01 . Tighten the lag bolts only until they are pulled firmly against the wall plate. ! CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts. 3 4 No! Wall Wall Level Concrete Wall Anchor (Not included) Please contact us and message to us to have these additional pieces shipped directly to you. 01 07 13 STEP 3 Wall Plate Installation Integrity Test Before hanging TV, please conduct "wall plate installation integrity test" first. 132 LBS (60 kg) 14 STEP 5 Hang and Secure TV to Wall Plate 1 TV 2 Pull down 15 Take Down the TV from the Mount Pull down the straps 16福昕阅读器PDF打印机 版本 10.0.122.3451