CAMWAY Battery Monitor 8-120V 0-500A User Manual

1. နိဒါန်း

This manual provides detailed instructions for the installation, operation, and maintenance of your CAMWAY Battery Monitor. This device is designed to accurately measure and display key battery parameters such as State of Charge (%), remaining battery capacity (up to 999AH), charge and discharge current (A), and voltage (V). It is suitable for various applications including RVs, golf carts, motorhomes, and other portable equipment.

2. Box ထဲမှာ ဘာတွေပါလဲ။

ဖြည်သည့်အခါ အစိတ်အပိုင်းအားလုံး ရှိနေကြောင်း အတည်ပြုပါ-

• CAMWAY Battery Monitor Display Unit
• Base Mount & Sampler/Shunt (up to 500A current)
• ဝက်အူလှည့်
• Red M8 Ground Wire
• ကာကှယျဝါယာကြိုး
• ညွှန်ကြားချက်လက်စွဲ

3. အဓိကအင်္ဂါရပ်များ

• All-in-one Battery Monitoring: Displays State of Charge (%), remaining battery capacity (up to 999AH), charge/discharge current (A), and voltage (V) ။
• High-definition Backlight Display: Clear visibility of parameters with a two-way detection and display function.
• အလိုအလျောက် အိပ်စက်ခြင်း မုဒ်- Enters sleep mode when current is less than 50mA, with a button press to reactivate the backlight.
• ကျယ်ပြန့်သော အသုံးချမှု အပိုင်း- Supports 8-120V batteries up to 500A, suitable for golf carts, RVs, mobile equipment, e-bikes, and more.
• ဒေတာသိုလှောင်မှု- Automatically saves the last testing data upon system shutdown.
• လူသားဆန်သော ဒီဇိုင်း- Touch-sensitive buttons for backlight activation and parameter switching.
• ရေစိုခံပြီး တာရှည်ခံသည်- Designed for resilience in various environments.

4. တပ်ဆင်ခြင်းနှင့် တပ်ဆင်ခြင်း။

Proper wiring is crucial for accurate readings and safe operation. Please follow the instructions carefully.

4.1 ဝါယာကြိုးနည်းလမ်း

The battery monitor uses a shunt for current measurement. Ensure all negative current flows through the shunt.

1. s ကိုချိတ်ဆက်ပါ။ampler/shunt B- terminal to the battery pack B- terminal.
2. s ကိုချိတ်ဆက်ပါ။ampler/shunt P- terminal to the P-/C- of the charger.
3. Connect the shielded wire from the sampler/shunt to the display unit.
4. Connect the battery B+ terminal to the P+ (output+) terminal.

အရေးကြီးသောသတိပေးချက်များ-

• အဆိုပါ s ကိုampler/shunt must connect to the negative circuit of the battery. It is forbidden to lengthen or cut the shielded wire. The connection principle ensures that all current passes through the sampler ။
• When charging, the backlight will flash. When discharging, the backlight will always be on. If B- and P- connections are reversed, this behavior will be reversed.

၅.၃ ဗီဒီယိုတပ်ဆင်မှုလမ်းညွှန်

5. လုပ်ငန်းဆောင်ရွက်မှုညွှန်ကြားချက်များ

5.1 Display and Button Functions

The monitor features a 1.5-inch large screen with a green backlight for clear visibility.

• နောက်ခံအလင်းထိန်းချုပ်မှု- To turn off the backlight, press the left and right buttons simultaneously for 3 seconds.
• မုဒ်ပြောင်းနေသည်- Briefly touch the buttons to switch between displaying voltage (V), current (A/Ah), and State of Charge (%).
• အလိုအလျောက် အိပ်စက်ခြင်း- When the current is less than 50mA, the monitor automatically enters sleep mode. Press any button to wake it up.

5.2 စွမ်းရည်သတ်မှတ်ချက်

To ensure accurate State of Charge readings, set the total capacity of your battery bank in Amp- နာရီ (Ah)။

1. Access the capacity setting mode by pressing the 'A/Ah SET' button.
2. Use the arrow buttons to adjust the capacity value.
3. Confirm the setting by pressing the 'A/Ah SET' button again or waiting for a few seconds for it to auto-save.

6. သတ်မှတ်ချက်များ

This product is applicable for 8V~120V battery packs, such as lithium battery, lithium iron phosphate battery, lead-acid battery, nickel metal hydride batteries, etc.

7. ပြုပြင်ထိန်းသိမ်းမှု

To ensure the longevity and accurate performance of your CAMWAY Battery Monitor, follow these maintenance guidelines:

• သန့်ရှင်းရေး- Use a soft, dry cloth to clean the display and housing. Avoid abrasive cleaners or solvents that could damage the unit.
• ချိတ်ဆက်မှုများ- Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to inaccurate readings or device malfunction.
• သဘာဝပတ်ဝန်းကျင် ကာကွယ်ရေး- Although the unit is waterproof, avoid prolonged exposure to extreme temperatures or direct submersion in water.

၃

If you encounter issues with your battery monitor, refer to the following common troubleshooting steps:

• ရုပ်ထွက်/ပါဝါမရှိပါ- Check all power connections to the monitor and the battery. Ensure the battery has sufficient voltage to power the unit.
• မမှန်ကန်သော ဖတ်ရှုမှုများ- Verify that the shunt is correctly wired in the negative circuit and that all negative loads and charge sources pass through it. Check the battery capacity setting in the monitor to ensure it matches your battery bank.
• နောက်ခံမီး ပြဿနာများ- If the backlight is not functioning as expected, ensure the unit is not in automatic sleep mode (press any button to wake). If the issue persists, check wiring.
• Display Frozen: Disconnect power to the monitor for a few seconds, then reconnect to perform a soft reset.

ဤအဆင့်များကိုကြိုးစားပြီးနောက် ပြဿနာများဆက်ရှိနေပါက၊ ကျေးဇူးပြု၍ ဖောက်သည်အကူအညီကို ဆက်သွယ်ပါ။

9. အာမခံ

The CAMWAY Battery Monitor comes with an 18 လအာမခံ from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation. Please retain your proof of purchase for warranty claims.

10. ဖောက်သည်ပံ့ပိုးမှု

For any questions, technical assistance, or warranty inquiries, please contact CAMWAY customer support through the retailer where the product was purchased or visit the official CAMWAY webဆက်သွယ်ရန်အချက်အလက်အတွက်ဆိုက်။