MTS DESK
Instruction Manual
PARTS
[dimensions in mm / different scales] No extra or spare parts listed!
1x
1x 
2x 
- threads
1x 
- threads on both sides
1x 
1x 
1x
2x 
3x 
6x 
24x 
4x 
extrem flat head black 6x 
20x 
black 4x 
black
3x 
black
PRE-ASSEMBLED
with this parts:
2x 
4x 
8x 
4x 
4x 
4x 
4x 
ASSEMBLY
- pre-assembled universal connector
fix in middle position
- 2x slot nut M8
- cap
- 2x M8x16 flat head black
USUALLY PRE-ASSEMBLED
2x
- 2x star knob M6x25
- 4x washer Ø12
- 2x slot nut M6
- 2x bearing
- 2x curved spring washer
- 2x roller
- 2x M4x20 flat head
- 2x M8x30 extrem flat head black
- washers Ø16 black
- cap screwable
Use a plan surface for assembly.
- threads
- 4x pre-assembled universal connector
- caps
- 4x slot nut M8
for both sides
- 4x M8x14 flat head black
- before 2024 (6mm thick plates) 4x M8x16 flat head, black
- on the other side too
- 4x slot nut M8
- on the other side too
- 4x M8x14 flat head black
- before 2024 (6mm thick plates) 4x M8x16 flat head, black
- roll into the upper slots
Detail view
- 2x screwable cap
- 4x M8x14 flat head black
- before 2024 4x M8x16 flat head, black
Detail view
- screwable cap
- 2x M8x14 flat head black
- before 2024 4x M8x16 flat head, black
OPERATION
- Loosen the red marked bolts on each side to adjust the height.
- Loose the 4 star knobs on each side.
Grab on both sides and move evenly!
- Loosen the screws marked in red to tilt the desk.
- Loosen the screws marked in red to change the distance of the desk.
OPTIONAL BIG DESK ASSEMBLY
- 3x slot nut M8
MTSIM MTS DESK INSTRUCTION MANUAL
- 3x M8x16 flat head black
12-01-2024
Documents / Resources
 | MTSIM MTS Base Frame Desk [pdf] Installation Guide MTS Base Frame Desk, MTS, Base Frame Desk, Frame Desk, Desk |
