Dokument

OWLLON TNS-0117 Dobe Wireless Gamepad Għall Nintendo Switch Pro Controller Manwal tal-Utent
OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Introduzzjoni tal-Produzzjoni:

This controller is of Bluetooth wireless type, which is mainly used with N-S console. The aisle light of the controller is assigned through the console. This product is available in motor vibration and sensor functions, and it supports the connection to PC console via USB so as to achieve PC XINPUT function

Dijagramma tal-Prodott:

Dijagramma tal-Prodott
Dijagramma tal-Prodott

Dijagramma tal-Funzjoni:

Isem il-Funzjoni Is there a function? Rimarki
Konnessjoni bil-fili USB Iva  
Konnessjoni Bluetooth appoġġ  
Modalità konnessjoni N-S PC mode  
Six-axis gravity induction Iva  
Ċavetta Iva  
Ċavetta B Iva  
X ċavetta Iva  
Ċavetta Y Iva  
- ċavetta Iva  
+ ċavetta Iva  
Ċavetta L Iva  
Ċavetta R Iva  
Ċavetta ZL Iva  
Ċavetta ZR Iva  
Ċavetta tad-dar Iva  
Print Screen key function Iva  
Joystick 3D (funzjoni tal-joystick 3D tax-xellug) Iva  
Ċavetta L3 (funzjoni taċ-ċavetta tal-istampa tal-joystick 3D tax-xellug) Iva  
R3 key (right 3D joystick press key function) Iva  
Cross key function Iva  
TUBRO speed regulation function Iva  
Connecting indicators Iva  
Motor vibration intensity adjustment Iva  
Aġġornament tal-kontrollur appoġġ  

Mode and Pairing Instruction:

  • 1. N-S wired connection mode:
    1. Before use the wired connection, please confirm the N-S console system: “set up” -> “controller and inductor” -> “wired connection of Pro controller” in “on” state.
    2. The controller is connected to the N-S base via USB cable so as to be used as the wired controller, and the corresponding indicator light of the controller will flash slowly; when you plug out the USB cable, the controller turns into wireless mode and connect the console automatically!
  • 2. N-S wireless connection mode:
    1. Before use the wireless connection, please confirm that the N-S console system turns to: “controller” -> “ change grip/order” in pairing state.
    2. Long press the code key of the controller for 3 seconds to enter into Bluetooth search mode, and the LED indicator light will flash in marquee type.
      The corresponding channel indicator light will be on after successful connection.
  • 3. PC-360, PC mode:
    Firstly, please download the PC 360 to Windows computer. After the PC 360 is installed, the controller should be connected to the computer via USB cable, and the corresponding channel indicator light will be on after successful connection. The LED2 and LED3 will be on when the No.1 and No.10 keys are pressed simultaneously to switch to PC mode.
  • 4. Back connection and shutdown instruction:
    1. Short press the Bluetooth code key to shutdown the controller.
    2. Press Home to wake up the controller. The awakened controller will automatically back connect the console which has been paired previously; it will switch to auto sleep if the back connection is not successful within 8 seconds.

Indikazzjoni tal-Iċċarġjar u Karatteristiċi tal-Iċċarġjar:

During the charging of the controller: the charging LED indicator light will be on, and it will be off after the controller is fully charged.

Sleep awtomatiku:

  • Connect N-S mode: the N-S console screen is off or shut down, and the controller automatically disconnects and switch to sleep mode.
  • Bluetooth connection mode: the Bluetooth disconnects and switches to sleep mode after the Bluetooth code key is pressed shortly.
  • Without any keys pressed within 5 min, it will switch to auto sleep mode (including gravitational induction immobility). Remarks: there is no auto sleep currently

TURBO Function Settings:

  • Issettjar tal-funzjoni TURBO semi-awtomatiku: agħfas iċ-ċavetta TURBO u mbagħad issettjaha bħala ċ-ċavetta tal-funzjoni TURBO kif meħtieġ, allura tista 'tlesti s-settings b'suċċess.
  • Full-automatic TURBO function setting: press TURBO key and then press the key which has been set up with the semi-automatic TURBO function.
  • Keys available for TURBO function settings: A key, B key, X key, Y key, + key, – key, L key, R key, ZL key, ZR key, “cross” key (up, down, left and right), L3 key (left 3D joystick press key) and R3 (right 3D joystick press key).
  • Ċavetta tasti tal-funzjoni TURBO li ġew issettjati:
    • Clear TURBO function of single key: press TURBO key + key set up with TURBO function for quick clear.
    • Shut down the automatic firing function: you should short press the – key and down arrow key once, and the controller will vibrate once to execute the command, then the automatic firing function of all keys will be turned off.
  • Regulation methods of automatic firing speed:
    • A. Increase automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been up regulated by one gear successfully.
    • B. Reduce automatic firing speed: short press T key and up arrow key once, and the controller will vibrate once to execute the command, which means that the automatic firing speed has been down regulated by one gear successfully.
    • C. The automatic firing function is memorable. If the console is connected after the controller is disconnected, the automatic firing speed set up previously can be memorized.

Motor Vibration Regulation:

3 gears in total: weak, intermediate and strong (the changed amplitude is 40%, 70% and 100%) regulation methods:

  • Lowest gear (40% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Intermediate gear (70% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • Top gear (100% amplitude): press 4 L/ZL/R/ZR keys on the side for 1 sec simultaneously, then the regulations is successful.
  • The intermediate gear of controller vibration is acquiescently connected for the first time, i.e. 70% ampil-lititudni.

Funzjoni ta' Konnessjoni USB:

  • The wired N-S and PC XINPUT mode connection is supported.
  • It is automatically identified as N-S mode when connected to N-S console.
  • It is in XINPUT mode when connected to PC.

Parametri elettriċi:

Punt Valur ta' referenza
Vol tax-xogħoltage DC 3.6-4.2V
Ħidma kurrenti 24mA
Kurrent fl-irqad 22.5uA
Kurrent tal-vibrazzjoni 82 mA~130 mA
Qawwa ta 'produzzjoni DC 4.5~5.5V/400mA
kapaċità tal-batterija 500mAh
Distanza operattiva 10m

3D Joystick Instruction:

  • The 3D joystick is not required to be calibrated manually on N-S console. The 3D joystick will be calibrated automatically when the N-S console is plugged.
  • If the 3D joystick drips during use, please replug and unplug the controller before use. Be careful not to touch the 3D joystick when you plug and unplug the controller.

Gyroscope Calibration Instruction:

Enter into the “N-S console setting – controller and inductor – calibration of gyroscope inductor” for controller test and calibration; place the controller horizontally on the desktop and long press + or – for calibration.

Controller Upgrade Instruction:

  • If this product cannot be used due to system compatibility and other reasons, please contact the customer service provider to provide program: install the upgrade package to upgrade.
  • Specific operation: plug the controller into the computer first, then press the X+Y+HOME for 3 sec to enter into the upgrade mode; and then open the Program.exe software, click update firmware to upgrade, and wait for the prompt for successful update.

Kwistjonijiet li Jeħtieġu Attenzjoni:

  • Dan il-prodott għandu jinżamm tajjeb meta ma jintużax.
  • Dan il-prodott ma jistax jintuża u jinħażen f'ambjent umdu.
  • Dan il-prodott għandu jintuża jew jinħażen billi jiġu evitati trabijiet u tagħbijiet tqal biex jiggarantixxu l-ħajja tas-servizz tiegħu.
  • Jekk jogħġbok tużax il-prodott li huwa mxarrba, ġġarraf jew imkisser u bi problemi ta 'prestazzjoni elettrika kkawżati minn użu mhux xieraq.
  • Tużax tagħmir estern tat-tisħin bħal fran microwave għat-tnixxif.
  • Jekk tkun bil-ħsara, jekk jogħġbok ibgħatha lid-dipartiment tal-manutenzjoni għar-rimi. Żarmahiex waħdek.
  • L-utenti tat-tfal għandhom jużaw dan il-prodott kif suppost taħt il-gwida tal-ġenituri, u ma jkunux dipendenti fuq il-logħba.

Attenzjoni FCC :

Dan l-apparat jikkonforma mal-parti 15 tar-Regoli tal-FCC. L-operazzjoni hija soġġetta għaż-żewġ kundizzjonijiet li ġejjin:

  1. Dan l - apparat jista 'ma jikkawżax interferenza ta' ħsara, u
  2. dan it-tagħmir irid jaċċetta kwalunkwe interferenza riċevuta, inkluża interferenza li tista 'tikkawża operazzjoni mhux mixtieqa.

Kwalunkwe Bidla jew modifika mhux approvata espressament mill-parti responsabbli għall-konformità tista 'tħassar l-awtorità ta' l-utent biex iħaddem it-tagħmir.

Nota: Dan it-tagħmir ġie ttestjat u nstab li jikkonforma mal-limiti għal apparat diġitali tal-Klassi B, skont il-parti 15 tar-Regoli tal-FCC. Dawn il-limiti huma mfassla biex jipprovdu protezzjoni raġonevoli kontra interferenza ta 'ħsara f'installazzjoni residenzjali.
Dan it-tagħmir jiġġenera użi u jista 'jirradja enerġija ta' frekwenza tar-radju u, jekk mhux installat u użat skond l-istruzzjonijiet, jista 'jikkawża interferenza ta' ħsara għall-komunikazzjonijiet bir-radju. Madankollu, m'hemm l-ebda garanzija li l-interferenza ma sseħħx f'installazzjoni partikolari. Jekk dan it-tagħmir jikkawża interferenza ta 'ħsara għar-riċeviment tar-radju jew tat-televiżjoni, li jista' jiġi determinat billi t-tagħmir jitfi u jixgħel, l-utent huwa mħeġġeġ jipprova jikkoreġi l-interferenza b'waħda jew aktar mill-miżuri li ġejjin:

  • Orjenta mill-ġdid jew iċċaqlaq mill-ġdid l-antenna li tirċievi.
  • Żid is-separazzjoni bejn it-tagħmir u r-riċevitur.
  • Qabbad it-tagħmir f'bokk fuq ċirkwit differenti minn dak li miegħu huwa mqabbad ir-riċevitur.
  • Ikkonsulta lin-negozjant jew lil tekniku ta 'radju / TV b'esperjenza għall-għajnuna.

L-apparat ġie evalwat biex jissodisfa r-rekwiżit ġenerali ta 'espożizzjoni għall-RF. L-apparat jista 'jintuża f'kondizzjoni ta' espożizzjoni portabbli mingħajr restrizzjoni.

Dokumenti / Riżorsi

OWLLON TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller [pdf] Manwal għall-Utent
TNS-0117, TNS0117, 2AJJCTNS-0117, 2AJJCTNS0117, TNS-0117 Dobe Wireless Gamepad For Nintendo Switch Pro Controller, TNS-0117, Dobe Wireless Gamepad For Nintendo Switch Pro Controller

Ħalli kumment

Your email address mhux se jkun ippubblikat.