FlySpark F4 V1 Stack Flight Controller
Speċifikazzjonijiet
- Isem tal-Prodott:
FlySpark F4 V1 BLS 60A Munzell - Karatteristiċi tal-AI:
Sensor Fusion, PID Autotuning, Adaptive Filtering - Appoġġ tas-Softwer:
Betaflight, INAV, Ardupilot, EMU-titjira, SkyBrush - ESC Communication:
BLHeli_S Bluetooth & USB-C - Konnettività:
3-6S LiPo - Dimensjoni:
47.8mm (L) x 47.5mm (W) x 18.3mm (H) - Immuntar:
30.5 x 30.5mm b'daqs ta 'toqba ta' 4mm - Piż:
34g
Istruzzjonijiet għall-Użu tal-Prodott
Kontrollur tat-Titjira FlySpark F4 V1
Tqassim:
Refer to the user manual for the layout of the flight controller.
Konnessjoni Periferali:
Connect peripherals as per the provided diagram.
App & Konfigurazzjoni FC:
Use the recommended apps and follow the configuration instructions.
Aġġornament tal-Firmware FC:
Connect the flight controller to a PC via USB for firmware updates.
FLYSPARK BLS 60A 4-IN-1 ESC
Tqassim:
Check the layout guide in the manual for proper installation.
Konnessjoni ma' Muturi u Kejbil tal-Enerġija:
Connect motors and power cables securely.
Konfigurazzjoni ESC:
Use the FlySpark app for ESC configuration settings.
Aġġornament tal-Firmware tal-ESC:
Follow the provided steps to update the firmware for ESC.
FlySpark F4 V1 BLS 60A Munzell
Speċifikazzjonijiet Matulview
Pakkett
- FlySpark F4 V1 Flight Controller x 1
- FlySpark BLS 60A 4-in-1 ESC x 1
- 35V 1000uF Baxx ESR Capacitor x 1
- Ġewż tan-najlon M3 x 4
- SH 1.0mm 25mm-tul 8pin Cable (għall-konnessjoni FC-ESC) x 1 SH 1.0mm 75mm-tul 6pin Cable* x 1
- M3 * 30mm Iner-hexagon Viti x 4
- DJI 6pin Cable (80mm) x 1
- Kejbil tal-Enerġija XT60 (100mm) x 1
FC Dijagramma tal-Konnessjoni
Gwida għall-Konnessjonijiet FC & ESC
Metodu 1:
- Using 8.Pin JST Cable
Metodu 2:
Saldjar Dirett
- Saldan 8 wajers mat-8 pads fuq kull tarf, wara d-definizzjonijiet tal-kuxxinett hawn taħt
Speċifikazzjonijiet tal-kontrollur tat-titjira
- Uża kejbil 6-pin jiġi ma 'l-O3 Air Unit
- Uża kejbil 6-pin jiġi mal-FlySpark F4 V1 BLS 60A Stack
F C Firmware update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:
- Use a USB cable to connect the FlySpark F4 VI flight controller to your PC
Open Betaflight I INAV Configurator.
- . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.
Navigate to Firmware Flashing:
- In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.
Select Target and Flash Firmware:
- Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
- Initiate the firmware flashing process.
Nota:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be performed using a USB connection to your PC.
Flyspark BLS 60A 4-in-l ESC
Konnessjoni ma 'Muturi u Kejbil tal-Enerġija
ESC Specs FlySpark F4 V1 BLS 60A Stack
Aġġornament tal-Firmware tal-ESC
Dan l-ESC 8-bit 50A jiġi mgħobbi minn qabel bil-firmware BLHeliS iżda jista 'wkoll jiġi flashed lill-firmware Bluejay, li joffri filtrazzjoni RPM u appoġġ Dshot Bi-direzzjonali. Segwi dawn il-passi biex taġġorna l-firmware:
- Prepare Your Drone:
Remove all propellers from your drone for safety. - Connect ESC to Flight Controller:
Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly. - Qabbad mal-PC:
Use a USB Type-C cable to connect the flight controller to your computer. - Access Firmware Configuration:
Open the Chrome browser and visit: www.esc-configurator.com - Flashing Steps:
Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.
ATTENZJONIJIET:
- PROPELLERS OFF: REMOVE ALL PROPELLERS.
- SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
- FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
- STABLE POWER: ENSURE STABLE POWER SUPPLY.
- www.FlySpark.in
FAQs
Kif naġġorna l-firmware ESC?
To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.
Dokumenti / Riżorsi
 |
FlySpark F4 V1 Stack Flight Controller [pdfManwal tal-Utent F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller |