Werrej
hide
Enerġija BLAZE PowerZone 1004 AmpGwida għall-Utent aktar ħajja
Kontenut tal-Kartuna
- Ampunità lifier
- Konnettur tal-ħruġ x 1 jew 2
- Kejbil tal-elettriku tal-mejn
- Saqajn adeżivi tal-gomma x 4
- Konnettur tad-dħul x 1 jew 2
- Pakkett ta' dokumenti
- Konnettur tas-sokit GPIO
- Rack Ears (PowerZone 1004)
Konnessjonijiet
Funzjonijiet tal-Iswiċċ DIP
| SWITCH | OFF↓ | ON↑ | |
| 1 | Kanal 1 fil-modalità Low-Z | Kanal 1 fil-modalità Hi-Z | |
| 2 | Kanal 2 fil-modalità Low-Z | Kanal 2 fil-modalità Hi-Z | |
| 3 | Channel 3 in Low-Z mode* | Channel 3 in Hi-Z mode* | |
| 4 | Channel 4 in Low-Z mode* | Channel 4 in Hi-Z mode* | |
| 5 | 70V Hi-Z mode (for channels in Hi-Z mode) |
100V Hi-Z mode
(for channels in Hi-Z mode) |
|
| 6 | Input ganging 1: Kollha | Input ganging 1:1 | |
| 7 | Polarità standby GPIO LE (Normalment Miftuħa) | Polarità standby GPIO NC (Magħluqa Normalment) | |
| 8 | Kontroll tal-pannell ta 'quddiem imsakkar. | Kontroll tal-pannell ta 'quddiem jinfetaħ. |
* Not applicable to two channel ampliifikaturi.
Noti dwar l-Installazzjoni
- Ensure that rack or other confined installation does not restrict the airflow required for safe and reliable operation of the equipment. It is important to ensure that the 40°C maximum operating temperature for the equipment is not exceeded.
- Amplifiers mhux se jinxtegħlu mill-modalità standby sakemm ma jkunx preżenti sinjal ta' input jew is-swiċċ standby ma jkunx toggled.
Funzjonijiet GPIO
appoġġ
- A full user manual that includes information on installation, mounting accessories and amplifier operation is available online. Go to www.blaze-audio.com or scan the QR code.
Aqra Aktar Dwar Dan il-Manwal u Niżżel il-PDF:
Dokumenti / Riżorsi
 |
Enerġija BLAZE PowerZone 1004 Ampaktar ħaj [pdf] Gwida għall-Utent PowerZone 252, PowerZone 504, PowerZone 1004, PowerZone 1004 Power Ampaktar b’saħħtu, Qawwa Ampaktar ħaj, Ampaktar ħaj |
