Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Trust DOORCAM-4000 Wireless Outdoor Video Doorbell. This device features a 2K HD 3MP camera, two-way audio communication, person detection, night vision, and can be controlled via the free Trust WiFi application. It includes a wireless chime for indoor alerts.
Kontenut tal-Pakkett
Jekk jogħġbok ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- Kamera tal-Vidjo Doorbell
- Unità taċ-Ċime bla Fili
- Mounting Materials (screws, wall plugs)
- Cable tal-Iċċarġjar tal-USB-C
- Manwal għall-Utent
Karatteristiċi Ewlenin
- 2K HD 3MP Camera: Provides clear video recording and live view.
- Konnettività WiFi ta' 2.4GHz: Ensures stable connection to your home network.
- Awdjo f'żewġ direzzjonijiet: Ikkomunika mal-viżitaturi direttament permezz tal-app.
- Sejbien tal-Persuna: Advanced motion detection to minimize false alerts.
- Klassifikazzjoni IP65 li ma jgħaddix ilma minnha: Iddisinjat għall-użu fuq barra f'diversi kundizzjonijiet tat-temp.
- Viżjoni bil-lejl: Clear visibility even in low-light conditions.
- Kontroll tal-App: Immaniġġja s-settings, view live feed, and receive notifications via the Trust WiFi app.
- Ħażna Lokali: Supports Micro SD card up to 256GB for secure video storage (card not included).
- Għażliet ta' Enerġija Flessibbli: Can be powered wirelessly via battery or wired (8-24V).
- Wireless Chime Included: Hear doorbell rings inside your home.
The Trust Video Doorbell features 2K HD 3MP video, night vision, motion detection, and IP65 splash resistance for reliable outdoor performance.
Setup
Follow these steps to set up your Trust DOORCAM-4000 Video Doorbell and connect it to the Trust WiFi app.
App Installation and Device Pairing
- Step 1: Download the Trust WiFi App.
Fittex għal "Trust WiFi" in your smartphone's app store (iOS or Android) and install the application. - Step 2: Open the Trust WiFi App.
Launch the Trust WiFi application on your smartphone.
The Trust WiFi app allows full control and monitoring of your doorbell.
- Step 3: Add Device.
In the app, select "Add Device" or tap the "+" icon. Ensure Bluetooth is enabled on your smartphone. - Step 4: Select Doorbell Camera.
From the list of device categories, navigate to "Doorbell Camera" and select your doorbell model (DOORCAM-3000/4000). - Step 5: Reset Device.
Follow the on-screen instructions to activate the doorbell camera by holding down the ON/OFF button for 5 seconds. Ensure the LED indicator is flashing red and a tone is heard. If the LED is not flashing red or no tone is heard, press the reset button for 5 seconds. Then select "Next step" in the app. - Step 6: Connect to 2.4GHz WiFi.
Select your 2.4 GHz WiFi network and enter the password. Importanti: The camera only operates on a 2.4 GHz WiFi network. Click "Next". - Step 7: Confirm WiFi Credentials.
Review your WiFi details and click "Confirm and Proceed". - Step 8: Scan QR Code.
Scan the QR code displayed on your smartphone screen with the doorbell camera. Hold the camera at a distance of 15 to 20 cm from the QR code. The camera will emit a confirmation signal. Select "I Heard a Prompt" in the app. - Step 9 (Optional): Name Your Camera.
You can assign a custom name to your doorbell camera. Press "Done" to confirm. - Step 10: Installation Complete.
The device will now be added to your app. Once the installation is complete, you can access the live feed and settings.
Installazzjoni Fiżika
The doorbell offers flexible installation options, either wireless (battery-powered) or wired (8-24V).
The doorbell can be installed wirelessly or wired, offering flexible placement options.
- Installazzjoni bla fili: Use the provided mounting materials to secure the doorbell to your desired outdoor location. Ensure the battery is charged via the USB-C cable before installation.
- Installazzjoni bil-fili: Connect the doorbell to existing 8-24V doorbell wiring. Consult a qualified electrician if you are unsure about wiring procedures.
Gwida għall-Installazzjoni tal-Vidjo
This video provides a visual guide for the application installation process of the Trust DOORCAM-3000B/4000 WiFi Video Doorbell.
Istruzzjonijiet Operattivi
Once installed and connected, operate your video doorbell using the Trust WiFi app.
- Live View: Iftaħ l-app għal view a live feed from your doorbell camera at any time.
- Komunikazzjoni f'żewġ direzzjonijiet: When a visitor presses the doorbell or motion is detected, you will receive a notification. Tap the notification to answer and speak with the visitor using the built-in microphone and speaker.
- Reġistrazzjoni: The camera can optionally record in 3MP (2K) HD when the doorbell is pressed or motion is detected. Recordings are saved to a Micro SD card (if installed).
- Viżjoni bil-lejl: The doorbell automatically switches to night vision mode in low-light conditions, providing clear images.
- Chime Operation: The included wireless chime will sound when the doorbell button is pressed, alerting you inside your home.
Monitor your entrance 24/7 with motion detection and night vision capabilities.
Engage in two-way audio communication with visitors directly from your smartphone.
Manutenzjoni
- Tindif: Imsaħ il-lenti tal-kamera u l-wiċċ tal-qanpiena tal-bieb b'ċarruta ratba u damp drapp. Evita cleaners li joborxu.
- Iċċarġjar tal-batterija: If using wireless installation, monitor the battery level via the app. Recharge the doorbell using the provided USB-C cable when necessary.
- Aġġornamenti tal-Firmware: Regularly check the Trust WiFi app for available firmware updates to ensure optimal performance and security.
- Karta Micro SD: If using local storage, periodically check the Micro SD card for storage capacity and data integrity. Format the card through the app if needed.
Easily recharge your doorbell using the included USB-C cable.
Issolvi l-problemi
- Il-qanpiena tal-bieb mhux qed tikkonnettja mal-WiFi: Ensure your WiFi network is 2.4 GHz. Check your WiFi password. Move the doorbell closer to your router.
- L-ebda notifika: Check app notification settings on your smartphone and within the Trust WiFi app. Ensure the doorbell has a stable internet connection.
- Kwalità fqira tal-vidjo: Ensure the camera lens is clean. Check your WiFi signal strength.
- Kwistjonijiet ta' skoperta ta' moviment: Adjust motion detection sensitivity in the app. Ensure the detection area is clear of obstructions.
- It-tonn mhux qed idoqq: Ensure the wireless chime is powered on and paired with the doorbell. Check its proximity to the doorbell.
- Batterija tisbat malajr: Reduce motion detection sensitivity or frequency of recordings. Ensure the doorbell is not in an area with constant activity.
Speċifikazzjonijiet
| Isem tal-Mudell | DOORCAM-4000 |
| Numru tal-Mudell | 71401 |
| Riżoluzzjoni tal-Kamera | 3MP (2K HD) |
| Teknoloġija tal-Konnettività | WiFi 2.4 GHz |
| Sors tal-Enerġija | USB-C / 8-24V (Wired) |
| Livell ta 'Reżistenza għall-Ilma | IP65 (Li ma jgħaddix ilma) |
| Ħażna | Micro SD up to 256 GB (not included) |
| Metodu ta' Kontroll | Application (Trust WiFi App) |
| Dimensjonijiet tal-Prodott | 35 x 53 x 142 mm |
| Piż tal-Prodott | 478 Gramm |
| Użu Rakkomandat | Sigurtà ta 'barra |
Garanzija u Appoġġ
The Trust DOORCAM-4000 Video Doorbell comes with a garanzija ta 'sena mid-data tax-xiri. Din il-garanzija tkopri difetti fil-manifattura u malfunzjonamenti taħt użu normali.
For technical support, troubleshooting assistance, or warranty claims, please visit the official Trust webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom. Żomm il-prova tax-xiri tiegħek għall-validazzjoni tal-garanzija.
