Introduzzjoni
This manual provides comprehensive instructions for the AOC GL150BA/27 TV LED Backlight (11.5FT model), designed for 32-50 inch TVs. This system enhances your viewing experience by synchronizing ambient lighting with on-screen content. It features advanced optical color capture, high-density RGB LEDs, and smart app control for personalized lighting effects.
Karatteristiċi Ewlenin
- Real-Time Screen Sync: Esperjenza immersiva viewing with colors that instantly mirror on-screen content, bringing movies, games, and sports to life.
- Upgraded Optical Color Capture: Advanced sensors precisely capture colors, unaffected by ambient light, for rapid 0.03s synchronization.
- 16-bit RGB LED: Each LED delivers up to 16 million colors with ultra-smooth gradients and realistic transitions for lifelike visuals.
- 60 RGB LEDs/m: Double the LED density (60 vs. 30 LEDs/m) for brighter, more vivid, and striking lighting effects.
- Smart App Control & DIY Modes: Customize colors, brightness, and effects freely using the uLamp app, offering 4 modes, 32 scene presets, 6 music modes, and fully customizable DIY settings.
- Funzjoni Awtomatika mixgħul/mitfi: Built-in screen detection automatically turns the backlight on when the screen is active and powers down after 5 minutes of inactivity, eliminating the need for a remote.
X'hemm fil-Kaxxa
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett tiegħek:
- Sensor Machine (x1)
- LED Light Strip (x1)
- Adapter tal-Enerġija (x1)
- Alcohol Wiping Cloth (x1)
- Adeżiv 3M (x1)
- Fixed Buckles (x12)
- Manwal ta' Istruzzjoni (x1)
- Quick Guide (x1)
Setup Istruzzjonijiet
Follow these steps to properly install your AOC TV LED Backlight.
Step 1: Prepare the TV Surface
Before attaching the LED strip, ensure the back of your TV is clean and dry. Use the provided alcohol wiping cloth to thoroughly clean the surface where the strip will be applied. Allow it to dry completely to ensure optimal adhesion.
Step 2: Attach the LED Light Strip
Carefully peel the adhesive backing from the LED strip. Begin attaching the strip from the top center of your TV, near where the sensor unit will be placed. Work your way counter-clockwise around the perimeter of the TV. When turning corners, gently bend the strip to avoid damage. Use the included fixed buckles for additional support, especially at corners and along longer sections. If the strip is too long for your TV, it can be cut at designated marks (usually indicated by a scissor icon) to fit perfectly.
Step 3: Place the Sensor Unit
Position the sensor unit at the top center of your TV. The gravity suspension structure is designed to hold it securely. Ensure the sensor's lens is facing forward, towards the TV screen, to accurately capture colors. If needed, use the 3M adhesive to further secure the sensor unit.
Pass 4: Qabbad Kejbils tal-Enerġija
Connect the LED light strip to the sensor unit, and then connect the power adapter to the sensor unit. Plug the power adapter into a suitable power outlet. Ensure all connections are secure.
Step 5: uLamp Setup tal-Kontroll tal-App
Download the 'uLamp' app from your smartphone's app store. Open the app and follow the on-screen instructions to connect to your AOC TV LED Backlight via Bluetooth. You may need to agree to user agreements and privacy policies. Once connected, the app will guide you through setting the LED strip installation direction (clockwise or counter-clockwise) and adjusting the number of lights based on your cut length for accurate synchronization.
Istruzzjonijiet Operattivi
Using the uLamp App
Once connected via the uLamp app, you can control various aspects of your TV LED Backlight:
- Modi: Select from 4 distinct lighting modes to suit your activity.
- Scene Presets: Choose from 32 pre-set scenes for instant ambiance.
- Modi tal-Mużika: Activate one of 6 music modes to synchronize lights with audio.
- DIY Settings: Create and save your own custom color, brightness, and effect combinations.
- Aġġustament tal-luminożità u l-kulur: Fine-tune the light output and color palette to your preference.
Funzjoni Awtomatika mixgħul/mitfi
The backlight system is equipped with a screen detection feature. It will automatically turn on when your TV screen becomes active and will power down after 5 minutes of inactivity, providing energy efficiency and convenience.
Manutenzjoni
To ensure the longevity and optimal performance of your AOC TV LED Backlight, follow these maintenance guidelines:
- Tindif: Periodically wipe the LED strip and sensor unit with a soft, dry cloth to remove dust. Avoid using harsh chemicals or abrasive cleaners.
- Immaniġġjar: Avoid excessive bending or pulling of the LED strip, especially at connection points, to prevent damage.
- Ħażna: If storing the unit for an extended period, ensure it is clean, dry, and stored in a cool, dark place.
Issolvi l-problemi
If you encounter issues with your AOC TV LED Backlight, refer to the following table for common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dwal ma jinxtegħlux | No power, loose connection, TV not active. | Check power adapter connection and outlet. Ensure LED strip is securely connected to the sensor. Verify TV is on and displaying content. |
| Kuluri ma jissinkronizzawx b'mod korrett | Sensor obstructed, incorrect app settings, ambient light interference. | Ensure sensor lens is clear and facing the screen. Check uLamp app settings for correct LED strip direction and length. Minimize direct ambient light on the sensor. |
| App ma tikkonnettjax mal-apparat | Bluetooth off, device out of range, app glitch. | Ensure Bluetooth is enabled on your phone. Move closer to the device. Restart the app or your phone. Re-pair the device in the app. |
| Lights are dim or inconsistent | Low brightness setting, damaged LED segment. | Adjust brightness in the uLamp app. Inspect the LED strip for any visible damage. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | GL150BA/27 |
| Brand | AOC |
| Kulur | Multicolor |
| Użu fuq ġewwa/barra | Ġewwa |
| Karatteristiċi Speċjali | Automatic On-Off, Color Changing, Dimmable |
| Tip ta' Sors tad-Dawl | LED |
| Sors tal-Enerġija | Corded Elettriku |
| Kulur Dawl | Multicolor |
| Tema | RGB TV Lighting |
| Okkazjoni | TV |
| Materjal | Plastik |
| Tip ta' Kontrollur | App Control |
| Metodu ta' Kontroll | App |
| Għadd ta' Unitajiet | 1.0 Għadd |
Garanzija u Appoġġ
Dan il-prodott jiġi ma 'a Garanzija tal-manifattur ta 'sena. For any product issues or support inquiries, please refer to your purchase documentation or contact AOC customer service.
Additional protection plans may be available for purchase, including 3-Year and 4-Year Protection Plans, and a monthly Complete Protect plan. Please check your retailer for details.