JEYI NVMe M.2 to 5-Port SATA Adapter (Model: PCIe M.2 5xSATA) Instruction Manual

1. Introduzzjoni u Fuqview

The JEYI NVMe M.2 to 5-Port SATA Adapter is designed to expand the storage capabilities of your system by converting a single M.2 NVMe slot into five SATA III 6GB/s ports. This adapter is ideal for NAS, server, and desktop PC applications requiring additional SATA connectivity for SSDs and HDDs. It features a built-in JMB585 chip for reliable performance and includes a heatsink for optimal thermal management.

Figure 1.1: JEYI NVMe M.2 to 5-Port SATA Adapter with Heatsink.

Figure 1.2: Comparison of New and Old PCB Versions. The new version incorporates design improvements based on user feedback.

2. Karatteristiċi tal-prodott

• Adds 5 SATA III 6GB/s ports via an M.2 NVMe slot.
• Supports PCIe 3.0 x2 interface, providing an uplink speed of up to 1700 MB/s.
• Plug and play functionality; no driver installation required.
• Supports UASP (USB Attached SCSI Protocol) and TRIM commands.
• Compliant with PCI Express specification Ver.3.1a.
• Compliant with SATA specification version 3.2.
• Supports 5-drive software RAID group (requires motherboard/OS support).
• Supports command-based and FIS-based port doubling.
• Supports PCI Express Physical Layer power saving mode.
• Supports AHCI mode and IDE programming interface.
• Supports Native Command Queuing (NCQ).
• Supports SATA power saving mode (partial and hibernation).
• Integrated aluminum heatsink for enhanced thermal performance.

Figure 2.1: Key features of the JEYI NVMe M.2 to 5-Port SATA Adapter.

Figura 2.2: Sploda view illustrating the JMB585 chip, aluminum heatsink, and working indicators.

3. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-oġġetti kollha huma preżenti u f'kundizzjoni tajba malli tiftaħ il-pakkett:

• JEYI NVMe M.2 to 5-Port SATA Adapter Card (with heatsink assembly)
• Viti tal-Immuntar
• Tornavit (għall-assemblaġġ/żarmar)

Figure 3.1: Included components: Adapter PCB, heatsink components, screwdriver, and mounting screws.

4. Setup u Installazzjoni

Importanti: Before beginning installation, ensure your computer is powered off and disconnected from the power source. It is recommended to wear an anti-static wrist strap to prevent damage to electronic components.

4.1 Rekwiżiti tas-Sistema

• Available M.2 NVMe slot (M-key, PCIe 3.0 x2 or higher).
• Motherboard support for M.2 PCIe Bifurcation is highly recommended for optimal performance and recognition of all 5 SATA drives. Without bifurcation support, your system may only recognize a limited number of drives. Consult your motherboard manual for details.
• Operating System: Windows 7/8/8.1/10 (32 & 64bit), Linux.

4.2 Passi ta' Installazzjoni

1. Ipprepara l-Adapter: If the heatsink is not pre-assembled, carefully attach the aluminum heatsink to the adapter PCB using the provided screws. Ensure proper alignment.
2. Sib is-Slott tal-M.2: Open your computer case and locate an available M.2 NVMe slot on your motherboard.
3. Daħħal l-Adapter: Gently insert the JEYI NVMe M.2 to 5-Port SATA Adapter into the M.2 slot at a 30-degree angle. Push down the adapter until it is parallel with the motherboard.
4. Waħħal l-Adapter: Secure the adapter with the M.2 mounting screw provided with your motherboard or the adapter kit.
5. Connect SATA Drives: Connect your SATA SSDs or HDDs to the five SATA ports on the adapter using standard SATA data cables. Ensure the cables snap securely into place.
6. Ipprovdi l-Enerġija: Ensure all connected SATA drives receive adequate power from your power supply unit (PSU).
7. Agħlaq il-Kaxxa u Ixgħelha: Agħlaq il-kaxxa tal-kompjuter tiegħek, erġa' qabbad il-provvista tal-enerġija, u ixgħel is-sistema tiegħek.

Figura 4.1: Ġenb view of the adapter, highlighting the M.2 connector for motherboard insertion.

Figure 4.2: The adapter with five SATA data cables connected to the ports.

5. Istruzzjonijiet Operattivi

Once installed, the JEYI NVMe M.2 to 5-Port SATA Adapter operates as a standard SATA controller. Your operating system should automatically detect the new SATA ports and any connected drives without requiring additional drivers.

• Rikonoxximent tas-Sewqan: After booting, check your operating system's Disk Management (Windows) or disk utility (Linux) to verify that all connected drives are recognized.
• Ifformattjar Drives: New drives will need to be initialized, partitioned, and formatted before use.
• Software RAID: If you intend to use a software RAID configuration, refer to your operating system's documentation for setting up RAID groups. The adapter supports 5-drive software RAID groups, but this functionality is managed by the operating system, not the adapter itself.
• Prestazzjoni: The adapter supports SATA III speeds up to 6GB/s per port, with a total uplink bandwidth of 1700 MB/s via PCIe 3.0 x2. Actual performance may vary based on your system configuration and connected drives.

Figure 5.1: Illustration of 6Gbps data transfer capability per SATA port.

6. Manutenzjoni

The JEYI NVMe M.2 to 5-Port SATA Adapter is designed for long-term, reliable operation with minimal maintenance. Follow these guidelines:

• Żomm Nadif: Periodically inspect the adapter for dust accumulation, especially around the heatsink fins. Use compressed air to gently remove dust.
• Konnessjonijiet sikuri: Ensure all SATA data and power cables remain securely connected to prevent intermittent drive issues.
• Kundizzjonijiet Ambjentali: Operate the adapter within standard computer operating temperatures and humidity levels.

7 Issolvi l-problemi

If you encounter issues with your JEYI NVMe M.2 to 5-Port SATA Adapter, refer to the following troubleshooting steps:

• Sewwieq Mhux Skoperti:
  • Check M.2 Bifurcation: Verify that your motherboard supports M.2 PCIe Bifurcation. Without this feature, not all 5 drives may be recognized. Consult your motherboard manual or BIOS settings.
  • Konnessjonijiet sikuri: Ensure all SATA data and power cables are firmly connected to both the adapter and the drives.
  • Provvista tal-Enerġija: Confirm that your power supply unit (PSU) has sufficient wattage and available power connectors for all connected drives.
  • Adapter Seating: Re-seat the M.2 adapter firmly into its slot on the motherboard.
  • Is-Settings tal-BIOS/UEFI: Check your system's BIOS/UEFI settings to ensure the M.2 slot is enabled and configured correctly (e.g., set to PCIe mode if applicable).
• Prestazzjoni bil-mod:
  • Kwalità tal-Kejbil: Uża kejbils SATA III ta' kwalità għolja.
  • Saħħa tas-Sewqan: Check the health and performance of your individual SSDs/HDDs.
  • System Load: High system load or other active storage devices can impact performance.
• Intermittent Drive Disconnections:
  • Integrità tal-Cable: Inspect SATA cables for damage. Replace if necessary.
  • Stabbiltà tal-Enerġija: Ensure stable power delivery to the drives.
  • Kwistjonijiet Termali: While the adapter has a heatsink, ensure adequate airflow within your PC case to prevent overheating of components.

8. Speċifikazzjonijiet

Figure 8.1: Physical dimensions of the JEYI NVMe M.2 to 5-Port SATA Adapter.

9. Informazzjoni dwar Garanzija

JEYI products typically come with a limited warranty. Specific warranty terms, conditions, and duration may vary by region and retailer. Please refer to the warranty card included with your purchase or visit the official JEYI website for the most current warranty information. Keep your proof of purchase for warranty claims.

10. Appoġġ

For technical assistance, product inquiries, or further support, please contact JEYI customer service through the following channels:

• Uffiċjali Websit: Visit the JEYI official website for FAQs, driver downloads (if applicable), and contact information.
• Appoġġ għall-Bejjiegħa bl-Imnut: Contact the retailer from whom you purchased the product for initial support or return/exchange policies.

When contacting support, please have your product model number (PCIe M.2 5xSATA) and proof of purchase readily available.