Manwal tal-Utent tal-Ispeaker Multimedia Edifier M60

1. Introduzzjoni

The Edifier M60 Multimedia Speaker system is designed to deliver high-quality audio with versatile connectivity options. This manual provides detailed instructions for setting up, operating, and maintaining your M60 speakers.

Il-karatteristiċi ewlenin jinkludu:

Powerful 66W RMS output from handcrafted wooden cabinets.
High-quality audio processing with 24-bit/96kHz support.
Multiple input methods: USB-C, AUX, and Bluetooth 5.3 with LDAC codec support.
User-friendly touch controls with automatic backlight.
Dedicated aluminum speaker stands for optimized listening.
Control and customization via the EDIFIER ConneX mobile app.

2. Kontenut tal-Pakkett

Qabel ma tibda, jekk jogħġbok kun żgur li l-oġġetti kollha huma preżenti fil-pakkett:

M60 Speakers (x1 pair)
Kejbil tal-Enerġija (x1)
Speaker Connection Cable (x1)
Aluminum Speaker Stands (x1 pair)
3.5mm-3.5mm Audio Cable (x1)
3.5mm-RCA Audio Cable (x1)
Kejbil USB-C għal USB-C (x1)
Gwida għall-Bidu Mgħaġġel (x1)
Important Safety Instructions (x1)

Edifier M60 Speaker package contents including speakers, cables, and stands.

Figure 2.1: Contents of the Edifier M60 speaker package.

3. Setup

3.1 Poġġiment ta' Speaker

Place the speakers on a stable, flat surface. The included aluminum stands are designed to tilt the speakers at a 15-degree angle, reducing sound reflections from the desktop surface and optimizing the listening experience.

Edifier M60 speakers on stands, angled at 15 degrees.

Figure 3.1: Proper speaker placement with 15-degree angled stands.

3.2 Konnessjoni tal-Ispeakers

Connect the left and right speakers using the provided speaker connection cable. Ensure the power cable is securely connected to the main speaker and a power outlet.

Wara view of Edifier M60 speaker with cables connected to AUX IN, USB IN, and speaker out.

Figure 3.2: Rear panel connections for the Edifier M60 speaker.

4. Istruzzjonijiet Operattivi

4.1 Power On/Off

To power the speakers on or off, press and hold the power button on the top panel for 1.5 seconds.

Top panel of Edifier M60 speaker showing touch controls for power, volume up, and volume down.

Figure 4.1: Top panel touch controls.

4.2 Qlib tas-Sors tal-Input

Tap the power button to cycle through input modes: Bluetooth (blue indicator), USB Audio (red indicator), and AUX (green indicator).

4.3 Konnessjoni Bluetooth

Switch the speaker to Bluetooth input mode. If no device is connected, the speaker will automatically enter Bluetooth pairing mode, and the indicator will flash blue.

On your device, select "EDIFIER M60" from the Bluetooth list. The indicator will turn solid blue upon successful connection.

If the speaker does not enter pairing mode, press and hold the power button and the "-" button for 1.5 seconds to force pairing mode.

To disconnect the current device, press and hold the power button and the "-" button for 1.5 seconds.

If the device is not connected for 10 minutes, the speaker will enter Bluetooth hidden mode, and the blue indicator will breathe. In this mode, new devices cannot discover the speaker, but previously paired devices can reconnect from their Bluetooth device list. To exit Bluetooth hidden mode, tap the power button.

Video 4.3.1: A user guide video demonstrating Bluetooth connection for the Edifier M60 speaker. It shows how to switch to Bluetooth mode, pair a device, and manage connections.

4.4 USB Audio Streaming

Switch the speaker to USB Audio streaming mode. Connect the M60 to your computer using the provided USB-C cable. Select "EDIFIER M60" as the audio output device on your computer to begin playback.

Rear panel of Edifier M60 speaker showing USB-C and AUX inputs.

Figure 4.4: USB-C and AUX input ports on the Edifier M60.

4.5 Konnessjoni tad-Dħul AUX

Switch the speaker to AUX mode. Connect the M60 to an audio device using the provided 3.5mm audio cable or 3.5mm-RCA audio cable.

4.6 Kontrolli tal-Daqq

Aġġustament tal-Volum: Tap the "+" or "-" buttons on the top panel to adjust the volume.
Track Skip (Bluetooth/USB Audio mode): To skip to the next track, slide your finger from the "-" button towards the "+" button. To skip to the previous track, slide your finger from the "+" button towards the "-" button.
Pause/Resume Playback (Bluetooth/USB Audio mode): To pause or resume playback, cover the entire top panel with your hand.
Mute/Unmute (AUX mode): To mute or unmute the speaker in AUX mode, cover the entire top panel with your hand.

Video 4.6.1: A user guide video demonstrating playback controls for the Edifier M60 speaker. It shows how to adjust volume, skip tracks, and pause/resume playback using the touch panel.

4.7 Applikazzjoni EDIFIER ConneX

Download the "EDIFIER ConneX" mobile app from the App Store or Google Play by scanning the QR code in the Quick Start Guide or package. Connect your device to the speaker via Bluetooth.

The app allows you to control playback, adjust volume, switch sound effects, customize settings, and perform firmware upgrades.

Screenshot of the EDIFIER ConneX app interface showing various settings and controls for the M60 speaker.

Figure 4.7: EDIFIER ConneX app interface for speaker control.

5. Manutenzjoni

Naddaf l-uċuħ tal-ispiker b'ċarruta ratba u niexfa.
Evita li tuża tindif jew solventi li joborxu.
Żomm l-ispikers 'il bogħod mix-xemx diretta, minn sorsi ta' sħana, u minn umdità.
Aċċerta ruħek li jkun hemm ventilazzjoni xierqa madwar l-ispikers.

6 Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
L-ebda ħoss	Power not connected, incorrect input mode, volume too low.	Check power connection, switch to correct input mode, increase volume.
Tqabbil Bluetooth falla	Speaker not in pairing mode, device too far.	Ensure speaker is in pairing mode (flashing blue indicator), move device closer, try force pairing (power + '-' buttons).
Distorsjoni tal-ħoss	Volume too high, poor audio source quality.	Reduce volume, try a different audio source.
Touch panel ma jirrispondix	Problema temporanju tas-softwer.	Restart the speaker by powering it off and on.

7. Speċifikazzjonijiet

Ditta: Edifikatur
Isem tal-Mudell: M60
Tip ta' Kelliem: Multimedia
Tip ta 'Immuntar: Mejda
Kulur: Brown (Current product variant)
Dimensjonijiet tal-oġġett (D x W x H): 14.7 ċm x 10 ċm x 16.8 ċm
Output ta' Enerġija Totali: 66W RMS
Tweeter: Tweeter tal-koppla tal-ħarir ta '1 pulzier
Mid-bass Driver: 3-inch long-throw aluminum mid-bass driver
Verżjoni Bluetooth: 5.3 (supports LDAC)
Ipproċessar Awdjo: High-performance analog audio front-end (ADC) and Class-D digital amplifier from Texas Instruments, supporting 24-bit/96kHz.
DSP: Built-in DSP for precise 22-way active crossover and effective Dynamic Range Control (DRC).
Inputs: USB-C, AUX
Aċċessorji inklużi: Stands tal-kelliem
Garanzija tal-Manifattur: 1 sena
Pajjiż ta' Oriġini: Iċ-Ċina

Diagram showing the internal components of the Edifier M60 speaker, including the 1-inch silk dome tweeter and 3-inch mid-bass driver.

Figure 7.1: Internal components of the Edifier M60 speaker.

Diagram illustrating the 24-bit/96kHz audio processing chip within the Edifier M60 speaker.

Figure 7.2: High-resolution audio processing in the M60.

8. Garanzija u Appoġġ

The Edifier M60 Multimedia Speaker comes with a 1-year manufacturer's warranty. For warranty claims or technical support, please contact Edifier customer service or visit the official Edifier websit.

You can also find additional support and resources through the Ħanut tal-Marka Edifier fuq Amazon.

9. Irrisettja l-Fabbrika

If necessary, you can reset the speaker to its factory default settings:

Open the "EDIFIER ConneX" app.
Navigate to "My Device" > "Initialize".
Select "Initialize" to confirm and reset the speaker.

Video 9.1: A user guide video demonstrating how to perform a factory reset on the Edifier M60 speaker using the EDIFIER ConneX app.

Edifikatur M60