Introduzzjoni
This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear Dual Monitor Stand. Please read this manual thoroughly before installation and keep it for future reference. Proper installation and use will ensure optimal performance and safety.
Informazzjoni dwar is-Sigurtà
- Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-assemblaġġ. Tużax jekk xi partijiet huma neqsin jew difettużi.
- Verify that your desk surface can support the combined weight of the stand and two monitors.
- Adhere strictly to the specified monitor size and weight limits to prevent instability or damage.
- Tighten all screws firmly, but do not overtighten to avoid stripping threads.
- Żomm it-tfal u l-annimali domestiċi 'l bogħod waqt l-installazzjoni.
- Always seek professional assistance if you are unsure about any part of the installation process.
Kontenut tal-Pakkett
Please check that all parts are included in your package:
- Arblu Prinċipali
- Dirgħajn tal-Monitor (2)
- C-Clamp Bażi
- Bażi tal-Immuntar tal-Grommet
- Pjanċi VESA (2)
- Kit tal-Ħardwer (viti, woxers, Allen wrenches)
- Klipps għall-Immaniġġjar tal-Kejbils
Speċifikazzjonijiet
| Tip ta 'Immuntar | Immuntar fuq il-mejda (C-Clamp jew Grommet) |
| Tip ta' Moviment | Dawwar, Inklina, Rotazzjoni |
| Materjal | Azzar Liga |
| Kulur | Iswed |
| Apparati Kompatibbli | Monituri |
| Daqs Minimu tal-Iskrin | 17 Pulzier |
| Daqs Massimu tal-Iskrin | 32 Pulzier |
| Weight Capacity per Arm | 4.4 to 22 lbs (2-10 kg) |
| Kompatibilità VESA | 75x75mm, 100x100mm |
| C-Clamp Ħxuna tal-Iskrivanija | 0.39"-3.15" (10-80mm) |
| Grommet Mount Desk Thickness | 0.4"-2.17" (10-55mm) |
The stand features a 16.54" tall pole and a maximum arm length of 37.8" (from center pole to monitor center).
Kompatibilità
Before installation, ensure your monitors meet the following criteria:
- Daqs tal-iskrin: Each monitor must be between 17 and 32 inches.
- Piż: Each monitor must weigh between 4.4 lbs (2 kg) and 22 lbs (10 kg).
- Mudell VESA: The back of each monitor must have VESA mounting holes with a pattern of either 75x75mm or 100x100mm.
Setup
The ErGear Dual Monitor Stand offers two mounting options: C-Clamp and Grommet Mount.
L-Għażla tal-Metodu ta' Immuntar Tiegħek
C-Clamp Installazzjoni
- Waħħal is-C-Clamp base to the bottom of the main pole using the provided screws.
- Poġġi s-C-Clamp on the edge of your desk. Ensure the desk thickness is between 0.39" and 3.15".
- Issikka l-clamp securely until the stand is stable.
Installazzjoni tal-Mount ta' Grommet
- If your desk has a grommet hole, remove its cover. Ensure the desk thickness is between 0.4" and 2.17".
- Assemble the grommet mount components as per the instructions in the hardware kit.
- Insert the grommet bolt through the desk hole and secure it from underneath with the provided plate and nut.
Attaching Monitors
- Attach the VESA plates to the back of your monitors using the appropriate screws from the hardware kit.
- Slide the assembled monitor arms onto the main pole at your desired height and secure them.
- Carefully lift each monitor and slide its VESA plate onto the corresponding monitor arm bracket. Ensure it clicks into place or is secured with the locking mechanism.
- Adjust the tension screws on the VESA plate to prevent the monitor from tilting freely.
Ġestjoni tal-Cable
Utilize the integrated cable management clips on the arms and main pole to route your monitor cables neatly. This helps maintain an organized workspace.
Aġġustamenti Operattivi
The ErGear Dual Monitor Stand offers flexible adjustments for optimal viewkumdità.
Aġġustament Għoli
The monitor arms can be moved up or down along the central pole. Loosen the securing knob on the pole, adjust the arms to the desired height, and then retighten the knob firmly.
Aġġustament tal-Mejjel
Monitors can be tilted -45° to +65°. Loosen the tilt screw on the VESA plate, adjust the monitor to your preferred angle, and then tighten the screw.
Aġġustament li jdur
Each monitor arm can swivel ±90° at multiple joints, allowing you to angle your monitors independently.
Aġġustament tar-Rotazzjoni
Monitors can be rotated 360° from landscape to portrait orientation. Simply rotate the monitor to the desired orientation.
Fine-Tuning Screen Alignment
The stand allows for micro height adjustments (0.19" / 5mm steps) to ensure perfect alignment between two monitors, even if they are of different models or sizes.
Manutenzjoni
- Iċċekkja regolarment il-viti u l-konnessjonijiet kollha biex tiżgura li jibqgħu ssikkati u siguri.
- Naddaf l-istand b'artab, damp drapp. Evita prodotti tat-tindif jew solventi li joborxu.
- Periodically inspect the monitor arms for any signs of wear or damage.
Issolvi l-problemi
| Ħruġ | Kawża Possibbli | Soluzzjoni |
| Monitor sags or does not hold position | Monitor weight exceeds capacity; tilt screw is loose. | Verify monitor weight is within 4.4-22 lbs. Tighten the tilt screw on the VESA plate. |
| L-istand mhux stabbli | C-Clamp or Grommet mount is not tightened sufficiently. | Ensure the C-Clamp or Grommet mount is securely fastened to the desk. Check desk thickness compatibility. |
| Il-moniters mhumiex livellati | Arms are not at the same height; micro-adjustment needed. | Adjust the height of each arm on the main pole. Use the micro height adjustment feature for fine-tuning. |
Garanzija u Appoġġ
The ErGear Dual Monitor Stand comes with a garanzija ta 'sena from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. For warranty claims, technical support, or any questions regarding your product, please contact ErGear customer service through the retailer where you purchased the product or visit the official ErGear websit għal informazzjoni ta' kuntatt.