Legrand Dooxie 16A 2P Socket (Model LEG95244) User Manual

1. Introduzzjoni

This manual provides essential information for the safe installation, operation, and maintenance of your Legrand Dooxie 16A 2P Socket, model LEG95244. Please read these instructions carefully before installation and retain them for future reference. This product is designed for indoor use in residential or commercial electrical systems.

2. Informazzjoni dwar is-Sigurtà

WARNING: Risk of electric shock. Improper installation can lead to serious injury or death.

• Always disconnect power at the circuit breaker or fuse box before installing or servicing the socket.
• L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi nazzjonali u lokali kollha.
• Do not install if the product appears damaged.
• Kun żgur li l-konnessjonijiet kollha tal-wajers huma sikuri u iżolati sew.
• This product is designed for 230 Volts. Verify your electrical system voltage qabel l-installazzjoni.
• Teċċedix il-klassifikazzjoni massima tal-kurrent ta' 16A.

3. Prodott Aktarview u l-Kontenut tal-Pakkett

The Legrand Dooxie 16A 2P Socket is a standard electrical outlet designed for reliable power delivery. It features a durable plastic construction with an aluminium finish. The package typically includes:

• 1 x Legrand Dooxie 16A 2P Socket unit (Model LEG95244)

Figura 1: Quddiem view of the Legrand Dooxie 16A 2P Socket. This image shows the two-pin socket configuration with the central grounding hole, set within its mounting frame.

Figura 2: Angolat view of the Legrand Dooxie 16A 2P Socket. This perspective highlights the depth and side profile of the socket, including the mounting tabs and the "Made in France" inscription.

4. Speċifikazzjonijiet

5. Installazzjoni (Setup)

IMPORTANT: Ensure power is OFF at the main circuit breaker before proceeding.

1. Ipprepara ż-Żona tax-Xogħol: Turn off the power to the circuit at the main electrical panel. Use a voltage tester to confirm that the power is off at the outlet box.
2. Neħħi s-Sokit il-Qadim (jekk applikabbli): Carefully unscrew and remove the existing outlet from the wall box. Disconnect the wires, noting which wire was connected to which terminal (e.g., live, neutral, ground).
3. Wajers tal-Istrixxa: If necessary, strip approximately 1/2 inch (12-15 mm) of insulation from the ends of the electrical wires (live, neutral, ground) in the wall box.
4. Qabbad Wajers:
   • Qabbad il- ħajjin wire (typically brown or black) to the designated live terminal on the new socket.
   • Qabbad il- newtrali wire (typically blue or white) to the designated neutral terminal.
   • Qabbad il- art wire (typically green/yellow or bare copper) to the ground terminal.

   Kun żgur li l-konnessjonijiet kollha huma ssikkati u siguri. Tissikkax iżżejjed il-viti.

5. Mount the Socket: Carefully fold the wires into the electrical box. Position the socket into the wall box and secure it with the mounting screws provided (or from the old outlet).
6. Install Faceplate (if applicable): Attach the decorative faceplate over the socket.
7. Irrestawra l-Enerġija: Erġa' ixgħel il-kurrent mis-circuit breaker prinċipali.
8. Test: Plug a device into the newly installed socket to ensure it is functioning correctly.

6. Operazzjoni

The Legrand Dooxie 16A 2P Socket operates as a standard electrical outlet. To use, simply insert the plug of your electrical appliance into the socket. Ensure the appliance's plug is compatible with the 2-pin configuration and that its power requirements do not exceed the socket's 16A rating at 230V.

7. Manutenzjoni

• Tindif: Disconnect power before cleaning. Wipe the surface of the socket with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
• Spezzjoni: Periodically inspect the socket for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, disconnect power and have the socket inspected or replaced by a qualified electrician.
• L-ebda Partijiet li jistgħu jservu mill-utent: The internal components of the socket are not user-serviceable. Do not attempt to open or repair the unit.

8 Issolvi l-problemi

If the socket is not functioning correctly, consider the following:

• Ebda Qawwa:
  • Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped or blown.
  • Ensure the appliance plugged into the socket is working correctly by testing it in another known-good outlet.
  • Verify that the wires are securely connected to the socket terminals (only perform if power is disconnected at the breaker).
• Plagg maħlul: If plugs feel loose in the socket, the internal contacts may be worn. This requires replacement by a qualified electrician.
• Is-sħana żejda: If the socket feels warm to the touch, immediately disconnect power and consult a qualified electrician. This could indicate an overload or faulty wiring.

For issues not resolved by these steps, contact a qualified electrician.

9. Informazzjoni dwar ir-Rimi

This product should not be disposed of with household waste. Please recycle it at an appropriate collection point for electrical and electronic equipment. Look for the crossed-out wheeled bin symbol on the product, packaging, or accompanying documents, which indicates that the product should be disposed of separately from ordinary household waste at the end of its service life. Proper disposal helps prevent potential negative consequences for the environment and human health.