1. Introduzzjoni
This manual provides instructions for the assembly, operation, maintenance, and troubleshooting of your BOLISS LB-2010 Mid Back Mesh Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Figure 1: BOLISS LB-2010 Mid Back Mesh Ergonomic Office Chair
2. Informazzjoni dwar is-Sigurtà
Istruzzjonijiet Importanti dwar is-Sigurtà:
- Teċċedix ir-rakkomandazzjoni tal-piż massimu ta' 400 liri (181 kg).
- Keep hands and feet clear of moving parts, especially during adjustment, to prevent injury.
- Kun żgur li l-boltijiet u l-viti kollha huma ssikkati sew qabel l-użu. Iċċekkja perjodikament u erġa' ssikka kif meħtieġ.
- Uża s-siġġu biss fuq wiċċ livellat.
- Toqgħodx fuq is-siġġu.
- Avoid exposing the chair to direct sunlight or extreme temperatures for prolonged periods.
- Keep small children and pets away from the chair during assembly.
3. Kontenut tal-Pakkett
Qabel tibda l-assemblaġġ, ivverifika li l-komponenti kollha huma preżenti u mhux imħassra. Jekk xi partijiet huma neqsin jew imħassra, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.
- 1 x Dahar
- 1 x Lumbar Support (integrated with backrest)
- 1 x Kuxxin tas-Sedil
- 1 x Five-Star Base
- 1 x Gas Lift Cylinder Column
- 1 x Control Mechanism
- 2 x Serħan tad-dirgħajn
- 5 x Roti (Casters)
- Ħardwer tal-Assemblaġġ (viti, woxers, ċavetta Allen)
4. Istruzzjonijiet tal-Assemblea
L-assemblaġġ tipikament jieħu 30-45 minuta. Huwa rakkomandat li tgħaqqad is-siġġu fuq wiċċ artab u nadif biex tevita l-ħsara.
- Waħħal ir-Roti mal-Bażi: Insert each of the 5 casters into the holes at the end of each leg of the five-star base. Push firmly until they click into place.
- Daħħal iċ-Ċilindru tal-Irfigħ tal-Gass: Poġġi ċ-ċilindru tal-irfigħ tal-gass fit-toqba taċ-ċentru tal-bażi b'ħames stilel.
- Attach Control Mechanism to Seat: Align the control mechanism with the pre-drilled holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with screws and washers using the provided Allen key.
- Waħħal id-Dirgħajn mas-Sedil: Attach each armrest to the sides of the seat cushion using the designated screws. Ensure they are oriented correctly.
- Waħħal id-Dahar tas-Sedil: Align the backrest with the mounting plate on the control mechanism or the rear of the seat. Secure with screws.
- Qabbad l-Assemblea tas-Sedil mal-Bażi: Carefully place the assembled seat onto the gas lift cylinder, ensuring the cylinder's top fits securely into the mechanism's opening.
Figure 2: Assembly and Feature Diagram
5. Istruzzjonijiet Operattivi (Aġġustamenti)
Your BOLISS LB-2010 chair offers several adjustment features for personalized comfort:
- Aġġustament tal-Għoli tas-Sedil: Locate the lever on the right side, beneath the seat. Pull the lever up to raise the seat. While seated, pull the lever up to lower the seat. Release the lever to lock the height.
- Aġġustament tal-Għoli tad-driegħ: Press the button located on the side of each armrest. While holding the button, move the armrest up or down to your desired height. Release the button to lock the armrest in place.
- Backrest Tilt Adjustment: Locate the lever on the left side, beneath the seat. Pull the lever out to unlock the tilt function, allowing the backrest to recline. Push the lever in to lock the backrest in an upright position.
- Aġġustament tat-Tensjoni tal-Inklinazzjoni: The round knob at the front of the control mechanism, beneath the seat, adjusts the resistance of the tilt function. Turn clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).
- Dawwar 360 Grad: The chair is designed to swivel 360 degrees for easy movement and access.
Figura 3: Wara view of the chair, highlighting mesh back and lumbar support
6. Manutenzjoni
Manutenzjoni regolari tgħin biex ittawwal il-ħajja u d-dehra tas-siġġu tiegħek.
- Tindif: Imsaħ il-partijiet tal-plastik u tal-metall b'ċarruta ratba u damp cloth. For the mesh back and fabric seat, use a mild fabric cleaner and a soft brush, testing on an inconspicuous area first. Avoid harsh chemicals or abrasive cleaners.
- Spezzjoni: Iċċekkja l-viti u l-boltijiet kollha perjodikament biex tiżgura li huma ssikkati. Erġa' ssikkahom jekk meħtieġ.
- Xandara: Naddaf ir-roti regolarment biex tneħħi t-trab u l-fdalijiet li jistgħu jfixklu l-moviment bla xkiel.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Is-siġġu ma jitlax jew ma jinżelx | Gas lift cylinder malfunction or control lever not engaged. | Kun żgur li l-lieva tal-aġġustament tal-għoli hija kompletament attivata. Jekk il-problema tippersisti, iċ-ċilindru tal-irfigħ tal-gass jista' jkollu bżonn jiġi mibdul. Ikkuntattja l-appoġġ għall-klijenti. |
| Is-siġġu jitħawwad jew iħossu instabbli | Viti maħlula jew art irregolari. | Check and tighten all assembly screws, especially those connecting the seat to the mechanism and the backrest. Ensure the chair is on a flat, even surface. |
| Ir-roti ma jdurux bla xkiel | Debris maqbud fir-roti jew fir-roti bil-ħsara. | Dawwar is-siġġu ta' taħt fuq u neħħi kwalunkwe xagħar, trab, jew debris mir-roti tal-caster. Jekk ir-roti jkunu bil-ħsara, jista' jkun li jkollhom bżonn jinbidlu. |
| Backrest does not tilt or lock | Tilt lock lever not engaged or tilt tension too high/low. | Ensure the tilt lock lever is correctly positioned. Adjust the tilt tension knob to your preference. |
| Armrests are loose or wobbly | Armrest attachment screws are loose. | Tighten the screws that secure the armrests to the seat. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | BOLISS |
| Isem tal-Mudell | LB-2010 |
| Kulur | All in Black |
| Dimensjonijiet tal-Prodott (P x W x H) | 25.4" x 28.1" x 37" (64.5 ċm x 71.4 ċm x 94 ċm) |
| Rakkomandazzjoni tal-Piż Massimu | 400 lbs (181 kg) |
| Lura Stil | Dahar tal-malja |
| Karatteristiċi Speċjali | Adjustable Height, Adjustable Arm Rests, Ergonomic Design, Swivel, Tilt Function |
| Fond tas-Sedil | 18 pulzieri (45.7 ċm) |
| Imla Materjal | Molded Foam |
| Piż tal-oġġett | 39.7 liri (18 kg) |
| Assemblea Meħtieġa | Iva |
Figura 4: Dimensjonijiet tas-Siġġu
9. Garanzija u Appoġġ
BOLISS is committed to customer satisfaction. Your BOLISS LB-2010 office chair comes with a garanzija ta' sentejn mid-data tax-xiri.
During this period, if you encounter any issues or require assistance with your product, please contact BOLISS customer service. Our support team is available to help resolve any concerns and ensure your product functions as intended.
For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official BOLISS websit.