SHENGLE JR1932RX-24V 2.4G Bluetooth Remote Control and Receiver Control Box Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the installation, operation, and maintenance of your SHENGLE JR1932RX-24V 2.4G Bluetooth Remote Control and Receiver Control Box Kit. This kit is designed for use with children's electric ride-on cars. Please read this manual thoroughly before use to ensure proper function and safety.

Prodott Overview

The SHENGLE JR1932RX-24V kit includes a 2.4G Bluetooth remote control and a corresponding receiver control box. These components facilitate remote operation of compatible children's electric ride-on cars.

Kontroll mill-bogħod

Figura 1: Quddiem view of the 2.4G Bluetooth Remote Control.

The remote control features buttons for forward, backward, left, right, speed selection, and power. It operates on a 2.4G Bluetooth frequency for stable connection.

Figura 2: Lura view of the 2.4G Bluetooth Remote Control, displaying the model number JR1839FCC and FCC ID.

Receiver Control Box

Figura 3: Fuq view of the JR1932RX-24V Receiver Control Box.

The receiver control box is the central unit that connects to the ride-on car's motor and power supply, receiving signals from the remote control. It is designed for 24V systems.

Setup

1. Kontroll ta' Qabel l-Installazzjoni

• Before installation, verify that this product (Model JR1932RX-24V) is consistent with the original parts of your children's electric ride-on car. Incompatibility may lead to malfunction.
• Ensure the ride-on car's power system is compatible with a 24V receiver.

2. Receiver Control Box Installation

1. Locate the existing control box in your ride-on car.
2. Carefully disconnect all wires from the old control box, noting their positions for correct re-connection.
3. Mount the new JR1932RX-24V receiver control box in the designated location.
4. Connect the wires from the ride-on car (motor, power, steering, etc.) to the corresponding ports on the new receiver control box. Refer to the wiring diagram provided with your ride-on car or the original control box for guidance.

3. Installazzjoni tal-Batterija tal-Kontroll mill-bogħod

• Open the battery compartment on the back of the remote control (refer to Figure 2).
• Daħħal il-batteriji meħtieġa (mhux inklużi), waqt li tiżgura l-polarità korretta (+/-).
• Agħlaq il-kompartiment tal-batterija sew.

4. Pairing the Remote Control with the Receiver

The instructions for pairing the remote control are typically printed on the product packaging box. General pairing steps for 2.4G Bluetooth remotes often involve:

1. Ensure the ride-on car is powered OFF.
2. Press and hold the pairing button on the remote control (often a small button, sometimes labeled 'Code' or 'Pair').
3. While holding the pairing button, power ON the ride-on car.
4. Release the pairing button once the remote control's indicator light stops flashing or the car responds.
5. Test the remote control functions to confirm successful pairing.

Istruzzjonijiet Operattivi

Once the remote control and receiver are successfully paired, you can operate the ride-on car remotely.

• Buttuna tal-Qawwa: Turns the remote control ON/OFF.
• Buttuni 'l Quddiem/Lura: Control the car's movement direction.
• Left/Right Turn Buttons: Control the car's steering.
• Buttuna tal-Għażla tal-Veloċità: Adjusts the car's speed (e.g., low, medium, high).
• Brake/Stop Button: Immediately stops the car.

Always ensure a clear line of sight to the ride-on car and operate within a safe range. Supervise children during operation.

Manutenzjoni

• Tindif: Wipe the remote control and receiver box with a dry, soft cloth. Avoid using harsh chemicals or liquids.
• Sostituzzjoni tal-batterija: Replace remote control batteries when the indicator light dims or the control range decreases. Always use new batteries of the specified type.
• Ħażna: Store the components in a dry place away from direct sunlight and extreme temperatures when not in use. Remove batteries from the remote control if storing for extended periods.
• Spezzjoni: Periodically check all wire connections to the receiver box to ensure they are secure.

Issolvi l-problemi

• Il-kontroll remot mhux qed jirrispondi:
  • Check if the remote control is powered ON.
  • Ibdel il-batteriji fil-kontroll mill-bogħod.
  • Re-attempt the pairing process (refer to Setup section).
  • Ensure the ride-on car's power is ON.
• Car not moving or erratic movement:
  • Verify all wire connections to the receiver control box are secure.
  • Check the ride-on car's main battery charge level.
  • Ensure the receiver control box is correctly installed and compatible with the car's original parts.
• Firxa qasira ta' kontroll:
  • Ibdel il-batteriji tal-kontroll mill-bogħod.
  • Ensure there are no significant obstructions or strong interference sources between the remote and the car.

Speċifikazzjonijiet

• Numru tal-Mudell: JR1932RX-24V
• Provvista Voltage: DC 24V
• Kurrent tat-Tagħbija: Max 35A
• Frekwenza: 2.407GHz-2.473GHz
• Dimensjonijiet tal-pakkett: 7.95 x 6.34 x 2.95 pulzieri
• Piż tal-oġġett: 9.1 uqija
• Manifattur: SHENGLE ELECTRONIC
• Età Rakkomandata: 24 months - 5 years (for compatible ride-on cars)

Informazzjoni dwar Garanzija

Warranty details for this product are typically provided by the seller or manufacturer at the time of purchase. Please refer to your purchase documentation or contact the seller directly for specific warranty terms and conditions.

Appoġġ

For further assistance, technical support, or inquiries regarding this product, please contact the seller through your purchase platform or refer to the contact information provided on the product packaging. Ensure you have your model number (JR1932RX-24V) ready when seeking support.